RC-28 - Sicherheitskamera Jablotron - Kostenlose Bedienungsanleitung

Produkttyp	Kabelloser Türklingelknopf
Stromversorgung	6 V Batterie (Typ L1016)
Batterielebensdauer	Typischerweise 1 Jahr
Frequenz	433,92 MHz
Betriebsumgebung	Außenbereich, überdacht (mit Schutzdach)
Betriebstemperatur	-20 °C bis +50 °C
Betriebsfeuchtigkeit	25 % bis 75 %
Lagertemperatur	-20 °C bis +70 °C
Kompatible Empfänger	UC-260, UC-216, UC-222, UC-280
Installation	Nicht auf Metalloberfläche; Namensschildabdeckung öffnen, Schraube lösen, Rückteil befestigen, Knopf einsetzen, Empfänger anlernen
Batteriewechsel	Nach ca. 1 Jahr; rote LED blinkt bei korrektem Anschluss
Wartung	Keine spezielle Wartung erforderlich
Reinigung	Keine organischen Lösungsmittel verwenden
Entsorgung	Batterien gemäß örtlicher Vorschriften entsorgen; Produkt an Händler oder Hersteller zurückgeben
Hersteller	Jablotron Ltd., Pod Skalkou 33, 466 01 Jablonec nad Nisou, Tschechische Republik
Konformität	ERC REC 70-03, Richtlinie 1999/5/EG

Häufig gestellte Fragen - RC-28 Jablotron

Wie installiere ich den RC-28 Türklingelknopf?

Wie wechsle ich die Batterie im RC-28?

Mit welchen Empfängern ist der RC-28 kompatibel?

Wie reinige ich den RC-28?

Was ist die Reichweite des RC-28?

Kann der RC-28 im Freien verwendet werden?

Wie entsorge ich den RC-28 oder seine Batterie?

Was bedeuten die blinkenden Lichter am RC-28?

Ist der RC-28 regenfest?

Welche Zertifizierungen hat der RC-28?

BEDIENUNGSANLEITUNG RC-28 Jablotron

Wireless push button RC-28

The RC-28 is designed to be used as a wireless door bell button. It works with the UC-260 receiver as well as the UC-216, UC-222 and the UC-280 receivers.

Specification

Power 6 V battery (L1016 type)

Battery life time typically 1 year

Frequency 433.92 MHz

Operating environment Outdoor sheltered (use the protection roof)

Operating temperature from -20

Operating humidity from 25% to 75%

Storage temperature from -20

Can be operated according to ERC REC 70-03

^ C to +50 ^ C

^oC to +70 ^oC

Hereby, Jablotron Ltd., declares that this RC-28 is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. Original of the conformity assessment can be found at the web page www.jablotron.cz, section Technical support.

Installation

Note: Do not install the RC-28 on a metal surface. This could lead to significant reduction of the working distance

• Open the name label cover (see picture).
• Unscrew the screw under the cover
• Remove the rear part of the button by pressing in the released screw.
• Attach the rear part in the desired location together with the protective roof.
  • Install the button to the rear part.
• Write the desired name on the label and reattach its cover
• Enroll the button to the receiver(s) – see the receiver's installation manual for details
• Be careful not to use too much force while handling the transparent cover. If the cover has to be removed it is advisable to use a tool to grab the jutting out part of the cover and pull it up.

Battery replacement

The battery life time for the wireless button is typically one year. After this period you should replace the battery with a new one. When a new battery is installed, press the button. The red indicator should flash brightly if the battery is correctly connected.

The RC-28 requires no other specific maintenance. Do not use any organic solvent for cleaning.

Note: Dispose of batteries safely depending on the type of the batteries and local regulation. Although this product does not contain any harmful materials we suggest you to return the product to the dealer or directly to the producer after usage.

Pod Skalkou 33 46 6 01 Jablonec nad Nisou Czech Republic Tel.: [phone] fax: [phone] Internet: www.jablotron.cz

Wireless push button RC-28

The RC-28 is designed to be used as a wireless door bell button. It works with the UC-260 receiver as well as the UC-216, UC-222 and the UC-280 receivers.

Specification

Power 6 V battery (L1016 type)

Battery life time typically 1 year

Frequency 433.92 MHz

Operating environment Outdoor sheltered (use the protection roof)

Operating temperature from -20

Operating humidity from 25 % to 75 %

Storage temperature from -20

Can be operated according to ERC REC 70-03

^ C to +50^

^ C to +70^

Hereby, Jablotron Ltd., declares that this RC-28 is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. Original of the conformity assessment can be found at the web page www.jablotron.cz, section Technical support.

Installation

Note: Do not install the RC-28 on a metal surface. This could lead to significant reduction of the working distance

• Open the name label cover (see picture).
• Unscrew the screw under the cover
• Remove the rear part of the button by pressing in the released screw.
• Attach the rear part in the desired location together with the protective roof.
  • Install the button to the rear part.
• Write the desired name on the label and reattach its cover
• Enroll the button to the receiver(s) – see the receiver's installation manual for details
• Be careful not to use too much force while handling the transparent cover. If the cover has to be removed it is advisable to use a tool to grab the jutting out part of the cover and pull it up.

Battery replacement

The battery life time for the wireless button is typically one year. After this period you should replace the battery with a new one. When a new battery is installed, press the button. The red indicator should flash brightly if the battery is correctly connected.

The RC-28 requires no other specific maintenance. Do not use any organic solvent for cleaning.

Note: Dispose of batteries safely depending on the type of the batteries and local regulation. Although this product does not contain any harmful materials we suggest you to return the product to the dealer or directly to the producer after usage.

Pod Skalkou 33 46 6 01 Jablonec nad Nisou Czech Republic Tel.: [phone] fax: [phone] Internet: www.jablotron.cz