Bedford 1038 - Ur Gant - Gratis brugsanvisning og manual
Find enhedens vejledning gratis Bedford 1038 Gant i PDF-format.
Brugerspørgsmål om Bedford 1038 Gant
0 spørgsmål om dette apparat. Besvar dem du kender, eller stil dit eget.
Stil et nyt spørgsmål om dette apparat
Download vejledningen til din Ur i PDF-format gratis! Find din vejledning Bedford 1038 - Gant og tag din elektroniske enhed tilbage i hånden. På denne side er alle dokumenter nødvendige for brugen af din enhed offentliggjort. Bedford 1038 af mærket Gant.
BRUGSANVISNING Bedford 1038 Gant
GANT®
TIME
BEDFORD
USER INSTRUCTIONS
SPECIFICATIONS
GANT ID NO: 1038
MOVEMENT NO: OS21
BATTERY: SR927W
DISPLAYS AND BUTTONS
SETTING THE TIME
- Pull the crown out to position 2.
- Turn the crown to set hour and minute hands.
- When the crown is pushed back to the normal position, the hands begin to run.
SETTING THE DATE
- Pull the crown out to the 1st position.
- Turn the crown counter-clockwise to set the date.*
* If the date is set between the hours of around 9:00 PM and 1:00 AM, the date may not change on the following day. - After the date has been set, push the crown back to the normal position.
USING THE CHRONOGRAPH
This chronograph is able to measure and display time in 1/1 second units up to a maximum of 59 minutes and 59 seconds. The chronograph second hand keeps going continuously for 59 minutes 59 seconds after starting the measurement.
MEASURING TIME WITH THE CHRONOGRAPH
- The chronograph can be started and stopped each time button A is pressed.
- Pressing buttonB resets the chronograph and the chronograph second hand and chronograph minute hand returns to zero position.
CHRONOGRAPH RESET
(INCL. AFTER REPLACING BATTERY)
This procedure should be performed when the chronograph second hand does not return to zero position after the chronograph has been reset, and including after the battery has been replaced.
- Pull the crown out to position2.
- Press button A to set the chronograph second hand to the zero position. The chronograph hand can be advanced rapidly by continuously pressing button A.
- Once the hand have been zeroed, return the crown to the normal position.
* Do not push crown to normal position while the chronograph second hand returns to zero position. It stops on the way when crown is returned to normal position and its position is recognized as zero position.