AX-ADCT2 - Ukategoriseret AXESS - Gratis brugsanvisning og manual
Find enhedens vejledning gratis AX-ADCT2 AXESS i PDF-format.
Brugerspørgsmål om AX-ADCT2 AXESS
0 spørgsmål om dette apparat. Besvar dem du kender, eller stil dit eget.
Stil et nyt spørgsmål om dette apparat
Download vejledningen til din Ukategoriseret i PDF-format gratis! Find din vejledning AX-ADCT2 - AXESS og tag din elektroniske enhed tilbage i hånden. På denne side er alle dokumenter nødvendige for brugen af din enhed offentliggjort. AX-ADCT2 af mærket AXESS.
BRUGSANVISNING AX-ADCT2 AXESS
AX-ADCT2
INSTALLATION INSTRUCTIONS INSTALLATION INSTRUCTIONS INSTALLATION INSTRUCTIONS
The AX-ADCT2 should be installed on a stereo's speaker output wires or the output wires on an OEM amplifier of up to 80 watts per channel. These wires can be found behind the stereo in the dash, on the outside of an OEM amplifier, or on the input terminals on the OEM speakers.
Wire Color & Function: The audio input wire colors are an EIA standard for car stereo applications as follows:
YELLOW = BATTERY +12V Input
BLACK = GROUND Input
BLUE = REMOTE +12V Output
THE ABOVE POWER WIRES CAN BE CONNECTED DI-
RECTLY TO THE AMPLIFIER BEING ADDED
WHITE = LEFT Front (+) Input
WHITE/BLACK = LEFT Front (-) Input
GRAY = RIGHT Front (+) Input
GRAY/BLACK = RIGHT Front (-) Input
BLACK/WHITE = Reference Ground (-) (REFERENCE
GROUND OPTIONAL IF NOISE IS PRESENT)
NOTE: Be sure that all audio input connections are polarized or in phase with each other. That is, the positive output wires from the audio source need to be connected to the corresponding positive input wires of the AX-ADCT2. The same goes for the negative audio wires. Failure to do this will result in poor bass response and low quality audio.
AX-ADCT2
The AX-ADCT2 should be installed on a stereo's speaker output wires or the output wires on an OEM amplifier of up to 80 watts per channel. These wires can be found behind the stereo in the dash, on the outside of an OEM amplifier, or on the input terminals on the OEM speakers.
Wire Color & Function: The audio input wire colors are an EIA standard for car stereo applications as follows:
YELLOW = BATTERY +12V Input
BLACK = GROUND Input
BLUE = REMOTE +12V Output
THE ABOVE POWER WIRES CAN BE CONNECTED DI-
RECTLY TO THE AMPLIFIER BEING ADDED
WHITE = LEFT Front (+) Input
WHITE/BLACK = LEFT Front (-) Input
GRAY = RIGHT Front (+) Input
GRAY/BLACK = RIGHT Front (-) Input
BLACK/WHITE = Reference Ground (-) (REFERENCE
GROUND OPTIONAL IF NOISE IS PRESENT)
NOTE: Be sure that all audio input connections are polarized or in phase with each other. That is, the positive output wires from the audio source need to be connected to the corresponding positive input wires of the AX-ADCT2. The same goes for the negative audio wires. Failure to do this will result in poor bass response and low quality audio.
AX-ADCT2
The AX-ADCT2 should be installed on a stereo's speaker output wires or the output wires on an OEM amplifier of up to 80 watts per channel. These wires can be found behind the stereo in the dash, on the outside of an OEM amplifier, or on the input terminals on the OEM speakers.
Wire Color & Function: The audio input wire colors are an EIA standard for car stereo applications as follows:
YELLOW = BATTERY +12V Input
BLACK = GROUND Input
BLUE = REMOTE +12V Output
THE ABOVE POWER WIRES CAN BE CONNECTED DI-
RECTLY TO THE AMPLIFIER BEING ADDED
WHITE = LEFT Front (+) Input
WHITE/BLACK = LEFT Front (-) Input
GRAY = RIGHT Front (+) Input
GRAY/BLACK = RIGHT Front (-) Input
BLACK/WHITE = Reference Ground (-) (REFERENCE
GROUND OPTIONAL IF NOISE IS PRESENT)
NOTE: Be sure that all audio input connections are polarized or in phase with each other. That is, the positive output wires from the audio source need to be connected to the corresponding positive input wires of the AX-ADCT2. The same goes for the negative audio wires. Failure to do this will result in poor bass response and low quality audio.
AX-ADCT2
The AX-ADCT2 should be installed on a stereo's speaker output wires or the output wires on an OEM amplifier of up to 80 watts per channel. These wires can be found behind the stereo in the dash, on the outside of an OEM amplifier, or on the input terminals on the OEM speakers.
Wire Color & Function: The audio input wire colors are an EIA standard for car stereo applications as follows:
YELLOW = BATTERY +12V Input
BLACK = GROUND Input
BLUE = REMOTE +12V Output
THE ABOVE POWER WIRES CAN BE CONNECTED DI-
RECTLY TO THE AMPLIFIER BEING ADDED
WHITE = LEFT Front (+) Input
WHITE/BLACK = LEFT Front (-) Input
GRAY = RIGHT Front (+) Input
GRAY/BLACK = RIGHT Front (-) Input
BLACK/WHITE = Reference Ground (-) (REFERENCE
GROUND OPTIONAL IF NOISE IS PRESENT)
NOTE: Be sure that all audio input connections are polarized or in phase with each other. That is, the positive output wires from the audio source need to be connected to the corresponding positive input wires of the AX-ADCT2. The same goes for the negative audio wires. Failure to do this will result in poor bass response and low quality audio.
AX-ADCT2
The AX-ADCT2 should be installed on a stereo's speaker output wires or the output wires on an OEM amplifier of up to 80 watts per channel. These wires can be found behind the stereo in the dash, on the outside of an OEM amplifier, or on the input terminals on the OEM speakers.
Wire Color & Function: The audio input wire colors are an EIA standard for car stereo applications as follows:
YELLOW = BATTERY +12V Input
BLACK = GROUND Input
BLUE = REMOTE +12V Output
THE ABOVE POWER WIRES CAN BE CONNECTED DI-
RECTLY TO THE AMPLIFIER BEING ADDED
WHITE = LEFT Front (+) Input
WHITE/BLACK = LEFT Front (-) Input
GRAY = RIGHT Front (+) Input
GRAY/BLACK = RIGHT Front (-) Input
BLACK/WHITE = Reference Ground (-) (REFERENCE
GROUND OPTIONAL IF NOISE IS PRESENT)
NOTE: Be sure that all audio input connections are polarized or in phase with each other. That is, the positive output wires from the audio source need to be connected to the corresponding positive input wires of the AX-ADCT2. The same goes for the negative audio wires. Failure to do this will result in poor bass response and low quality audio.
AX-ADCT2
INSTALLATION INSTRUCTIONSINSTALL
The AX-ADCT2 should be installed on a stereo's speaker output wires or the output wires on an OEM amplifier of up to 80 watts per channel. These wires can be found behind the stereo in the dash, on the outside of an OEM amplifier, or on the input terminals on the OEM speakers.
Wire Color & Function: The audio input wire colors are an EIA standard for car stereo applications as follows:
YELLOW = BATTERY +12V Input
BLACK = GROUND Input
BLUE = REMOTE +12V Output
THE ABOVE POWER WIRES CAN BE CONNECTED DI-
RECTLY TO THE AMPLIFIER BEING ADDED
WHITE = LEFT Front (+) Input
WHITE/BLACK = LEFT Front (-) Input
GRAY = RIGHT Front (+) Input
GRAY/BLACK = RIGHT Front (-) Input
BLACK/WHITE = Reference Ground (-) (REFERENCE
GROUND OPTIONAL IF NOISE IS PRESENT)
NOTE: Be sure that all audio input connections are polarized or in phase with each other. That is, the positive output wires from the audio source need to be connected to the corresponding positive input wires of the AX-ADCT2. The same goes for the negative audio wires. Failure to do this will result in poor bass response and low quality audio.
AX-ADCT2
The AX-ADCT2 is designed to convert 2 channels of speaker level audio into 2 channels of line level audio. This allows for the installation of line level products such as amplifiers, EQs and crossovers on systems that do not have RCA line level outputs. In addition this device will also detect the presence of an audio signal and then generate a +12V output (verifi ed by an illuminated LED) that can be used to turn-on an aftermarket amplifier.
Features:
80 Watts Maximum Input, Input Circuit Corrects Crossover Distortion Commonly Found On Other Brands of LOCs, 6:1 Step Down with Variable Output, Gold Flashed RCAs, Attractive & Durable Enclosure. The AX-ADCT2 will shut off 60 seconds after no signal detected.
1-800-221-0932
axxessinterface.com
© COPYRIGHT 2004-2010 METRA ELECTRONICS CORPORATION
AX-ADCT2
The AX-ADCT2 is designed to convert 2 channels of speaker level audio into 2 channels of line level audio. This allows for the installation of line level products such as amplifiers, EQs and crossovers on systems that do not have RCA line level outputs. In addition this device will also detect the presence of an audio signal and then generate a +12V output (verified by an illuminated LED) that can be used to turn-on an aftermarket amplifier.
Features:
80 Watts Maximum Input, Input Circuit Corrects Crossover Distortion Commonly Found On Other Brands of LOCs, 6:1 Step Down with Variable Output, Gold Flashed RCAs, Attractive & Durable Enclosure. The AX-ADCT2 will shut off 60 seconds after no signal detected.
1-800-221-0932
axxessinterface.com
© COPYRIGHT 2004-2010 METRA ELECTRONICS CORPORATION
AX-ADCT2
The AX-ADCT2 is designed to convert 2 channels of speaker level audio into 2 channels of line level audio. This allows for the installation of line level products such as amplifiers, EQs and crossovers on systems that do not have RCA line level outputs. In addition this device will also detect the presence of an audio signal and then generate a +12V output (verifi ed by an illuminated LED) that can be used to turn-on an aftermarket amplifier.
Features:
80 Watts Maximum Input, Input Circuit Corrects Crossover Distortion Commonly Found On Other Brands of LOCs, 6:1 Step Down with Variable Output, Gold Flashed RCAs, Attractive & Durable Enclosure. The AX-ADCT2 will shut off 60 seconds after no signal detected.
1-800-221-0932
axxessinterface.com
© COPYRIGHT 2004-2010 METRA ELECTRONICS CORPORATION
AX-ADCT2
The AX-ADCT2 is designed to convert 2 channels of speaker level audio into 2 channels of line level audio. This allows for the installation of line level products such as amplifiers, EQs and crossovers on systems that do not have RCA line level outputs. In addition this device will also detect the presence of an audio signal and then generate a +12V output (verified by an illuminated LED) that can be used to turn-on an aftermarket amplifier.
Features:
80 Watts Maximum Input, Input Circuit Corrects Crossover Distortion Commonly Found On Other Brands of LOCs, 6:1 Step Down with Variable Output, Gold Flashed RCAs, Attractive & Durable Enclosure. The AX-ADCT2 will shut off 60 seconds after no signal detected.
1-800-221-0932
axxessinterface.com
© COPYRIGHT 2004-2010 METRA ELECTRONICS CORPORATION
AX-ADCT2
The AX-ADCT2 is designed to convert 2 channels of speaker level audio into 2 channels of line level audio. This allows for the installation of line level products such as amplifiers, EQs and crossovers on systems that do not have RCA line level outputs. In addition this device will also detect the presence of an audio signal and then generate a +12V output (verified by an illuminated LED) that can be used to turn-on an aftermarket amplifier.
Features:
80 Watts Maximum Input, Input Circuit Corrects Crossover Distortion Commonly Found On Other Brands of LOCs, 6:1 Step Down with Variable Output, Gold Flashed RCAs, Attractive & Durable Enclosure. The AX-ADCT2 will shut off 60 seconds after no signal detected.
1-800-221-0932
axxessinterface.com
© COPYRIGHT 2004-2010 METRA ELECTRONICS CORPORATION
AX-ADCT2
The AX-ADCT2 is designed to convert 2 channels of speaker level audio into 2 channels of line level audio. This allows for the installation of line level products such as amplifiers, EQs and crossovers on systems that do not have RCA line level outputs. In addition this device will also detect the presence of an audio signal and then generate a +12V output (verified by an illuminated LED) that can be used to turn-on an aftermarket amplifier.
Features:
80 Watts Maximum Input, Input Circuit Corrects Crossover Distortion Commonly Found On Other Brands of LOCs, 6:1 Step Down with Variable Output, Gold Flashed RCAs, Attractive & Durable Enclosure. The AX-ADCT2 will shut off 60 seconds after no signal detected.
1-800-221-0932
axxessinterface.com
© COPYRIGHT 2004-2010 METRA ELECTRONICS CORPORATION