MACSWIVELS - Haut-parleur Rockville - Notice d'utilisation et mode d'emploi gratuit
Retrouvez gratuitement la notice de l'appareil MACSWIVELS Rockville au format PDF.
| Type de produit | Haut-parleur actif portable |
| Marque | Rockville |
| Modèle | MACSWIVELS |
| Dimensions (L x H x P) | Environ 30 x 50 x 25 cm |
| Poids | Environ 5 kg |
| Alimentation | Secteur 230 V ~ 50 Hz |
| Puissance RMS | 200 W |
| Entrées audio | Bluetooth, USB, AUX, micro (XLR/Jack) |
| Connectivité sans fil | Bluetooth 5.0 |
| Fonctions principales | Lecture audio, amplification, entrée micro |
| Entretien et nettoyage | Essuyer avec un chiffon sec et doux |
| Sécurité | Ne pas exposer à l'humidité ou aux chocs |
| Pièces détachées et réparabilité | Contactez le service après-vente Rockville |
| Contenu de l'emballage | Enceinte, câble secteur, manuel d'utilisation |
| Utilisation recommandée | Sonorisation événements, karaoké, extérieur |
FOIRE AUX QUESTIONS - MACSWIVELS Rockville
Questions des utilisateurs sur MACSWIVELS Rockville
0 question sur cet appareil. Repondez a celles que vous connaissez ou posez la votre.
Poser une nouvelle question sur cet appareil
Téléchargez la notice de votre Haut-parleur au format PDF gratuitement ! Retrouvez votre notice MACSWIVELS - Rockville et reprennez votre appareil électronique en main. Sur cette page sont publiés tous les documents nécessaires à l'utilisation de votre appareil MACSWIVELS de la marque Rockville.
MODE D'EMPLOI MACSWIVELS Rockville

ROCKVILLE
Mac Swivel
360° ROTATION SWIVEL CLAMP MOUNTS
ASSEMBLY GUIDE
Thank you for purchasing these Mac Swivel 360 Degree Rotation Swivel Clamp Mounts. Please read these instructions carefully before use. Make sure all parts are included. If any parts are missing please contact our technical help line at 1-646-758-0144, Monday through Friday, 9am to 5pm EST.
| A | ![]() | 1 pc. |
| B | ![]() | 1 pc. |
| C | ![]() | 4 pcs. |
| D | ![]() | 4 pcs. |
| E | ![]() | 2 pcs. |
| F | ![]() | 8 pcs. |
STEP 1
Remove the speaker, wire, and clamp from you MAC can. Attach the swivel clamp to the top of the can using the washer plate & allen bolts (from previous installation), and the larger of the two allen wrenches (B).

STEP 3
Place the bottom half of the swivel clamp below the wake tower pole. If your wake tower has prednilled holes for routing speaker cables, insert the them at this time. Place the top half of the clamp over the wake tower pole and attach to the lower half using 2 of the 4 included a ten bolts. If the clamp does not fit snugly, use one of the 4 included rubber inserts. Do not overnight the bolts.

STEP 2
Thread the speaker wire through the predrilled center hole and reinstall the speaker

STEP 4
To rotate the speaker, loosen the recessed alien screws located at the front and the rear of the clamp base using the smaller of the two included alien wrenches (A). Turn the speaker can to the desired angle, then lighten both alien screws. Do not overlighten.

© 2018 ROCKVILLE // The information presented is subject to change and or improvement without notice.
RockvilleAudio.com





