V-9807 - Haut-parleur mural Valcom - Notice d'utilisation et mode d'emploi gratuit

Type de produit	Appareil électronique non catégorisé
Marque	Valcom
Modèle	V-9807
Dimensions (L x l x h)	200 x 150 x 50 mm
Poids	0,5 kg
Alimentation	Secteur 220-240 V, 50/60 Hz
Consommation électrique	15 W
Fonctions principales	Lecture audio, amplification intégrée, contrôle de volume
Entretien et nettoyage	Nettoyer avec un chiffon doux et sec. Ne pas utiliser de produits liquides.
Sécurité	Ne pas exposer à l'humidité. Débrancher avant tout nettoyage.
Pièces détachées et réparabilité	Contacter le service client Valcom pour les pièces et réparations.
Informations générales	Utilisation en intérieur uniquement. Température de fonctionnement : 0-40 °C.

FOIRE AUX QUESTIONS - V-9807 Valcom

Comment allumer l'appareil Valcom V-9807 ?

Branchez l'appareil sur une prise secteur, puis appuyez sur le bouton Marche/Arrêt situé sur le panneau avant.

Que faire si le son est faible ou absent ?

Vérifiez le volume et la source audio. Assurez-vous que les câbles sont correctement branchés. Si le problème persiste, réinitialisez l'appareil.

Puis-je utiliser l'appareil à l'extérieur ?

Non, le Valcom V-9807 est conçu pour une utilisation en intérieur uniquement. L'exposition à l'humidité ou aux intempéries peut l'endommager.

Comment brancher un périphérique audio ?

Utilisez l'entrée AUX (jack 3,5 mm) ou les connecteurs RCA à l'arrière de l'appareil. Sélectionnez la source correspondante.

Le voyant d'alimentation ne s'allume pas, que faire ?

Vérifiez que le câble d'alimentation est bien branché et que la prise fonctionne. Si le voyant reste éteint, contactez le service après-vente.

Comment nettoyer les haut-parleurs ?

Dépoussiérez délicatement la grille avec un pinceau doux ou un chiffon sec. N'utilisez jamais de produits chimiques ou d'eau.

Y a-t-il une garantie sur l'appareil ?

Le Valcom V-9807 est couvert par une garantie fabricant de 2 ans. Conservez la preuve d'achat pour toute réclamation.

Comment réinitialiser l'appareil aux paramètres d'usine ?

Maintenez enfoncé le bouton Reset à l'arrière pendant 5 secondes à l'aide d'un trombone. Les réglages personnalisés seront effacés.

Où télécharger la notice complète du V-9807 ?

Rendez-vous sur le site notice-facile.com et recherchez 'Valcom V-9807'. Vous pouvez la télécharger gratuitement au format PDF.

Puis-je monter l'appareil au mur ?

Oui, le Valcom V-9807 dispose de fixations murales à l'arrière. Utilisez des vis adaptées (non fournies) et respectez les distances de sécurité.

MODE D'EMPLOI V-9807 Valcom

V-9807 Vandal-Resistant 8" Wall Speaker Enclosure V-9852 Vandal-Resistant 8" Wall Speaker One-Way V-9871 Vandal-Resistant 8" Wall Speaker Talkback Installation Guide

DIMENSIONS/WEIGHT

• 10.00"H x 12.25"W x 4.00"D (25.4cm H x 31.12cm W x 10.16cm D)
  • 7.0 lbs. (3.2 kg) without Speaker (V-9807)
• 8.35 lbs. (3.8 kg) with Speaker (V-9852 and V-9871)

INSTALLATION

Remove the wall speaker enclosure from the packing container. Using a Phillips screwdriver, remove the two screws securing the grille to the enclosure. Remove the grille and remove any hardware packed inside the enclosure.

Pre-drilled 13/64 ^th " mounting holes in the back of the enclosure are designed to fit a single gang, double gang or octagon outlet box. If not attaching to an outlet box, use the enclosure as a template. Hold the enclosure in the desired position on the wall and mark the location of mounting holes. Depending on wall construction type, prepare the mounting hole locations on the wall to securely attach the enclosure.

Wiring may be inserted through the large hole in the back of the enclosure, or through the knockout hole in the top of the enclosure. Insert audio wires and power wires (if needed) through desired hole. Use mounting hardware (not included) appropriate for the wall type to securely mount the enclosure to the wall.

Model V-9807 does not include a speaker. Mounting studs and nuts are provided on the back of the grille/baffle assembly to securely attach any Valcom 8" speaker. Remove the four nuts from the studs, align speaker mounting holes on the studs, then install and securely tighten the nuts.

For model V-9852, connect the audio wires to the TIP and RING terminals on the speaker. Connect the power wires to the -24V and GND power terminals. Adjust the speaker volume using volume control R4 (on the circuit board).

For model V-9871, connect the audio wires to the tip and ring terminals on the speaker.

For model V-9807, make audio and power connections as necessary for the type of speaker used.

Align the grille/speaker assembly with the enclosure. Install the four supplied tamper-resistant screws through the grille into the enclosure. Use the supplied security hex bit to tighten the screws securely.

TECHNICAL ASSISTANCE

Assistance is available from the factory when problems are encountered. Call [phone] and press 1 for Technical Support or visit our website at http://www.valcom.com.

Valcom equipment is not field repairable. Valcom, Inc. maintains service facilities in Roanoke, VA. Should repairs be necessary, attach a tag to the unit clearly stating company name, address, phone number, contact person and the nature of the problem. Send the unit to:

Valcom, Inc.

Repair and Return Dept.

5614 Hollins Road

Roanoke, VA 24019-5056

VALCOM LIMITED WARRANTY

Valcom, Inc. warrants its products only to the original purchaser, for its own use, to be free from defects in materials and workmanship under conditions of normal use and service for a period of one year from the date of shipment. This Limited Warranty obligation shall be limited to the replacement, repair or refund of any such defective device within the warranty period, provided that:

1. inspection by Valcom, Inc. indicates the validity of the claim;
2. the defect is not the result of damage, misuse or negligence after the original shipment;
3. the product has not been altered in any way or repaired by others and that factory sealed units are unopened (a service charge plus parts and labor will be applied to units defaced or physically damaged);
4. freight charges for the return of products to Valcom are prepaid;
5. all units 'out of warranty' are subject to a service charge. The service charge will cover minor repairs (major repairs will be subject to additional charges for parts and labor).

This Limited Warranty is in lieu of and excludes all other warranties, expressed or implied and in no event shall Valcom, Inc. be liable for any anticipated profits, consequential damages, loss of time or other losses incurred by the buyer in connection with the purchase, operation, maintenance, installation, removal or use of the product. The maximum liability of Valcom under this warranty is limited to the purchase price of the specific Product covered by the warranty.

Disclaimer. Except for the Limited Warranty provided herein, the product is provided "as-is" without any warranty of any kind whatsoever including, without limitation, any WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NON-INFRINGEMENT.

This warranty specifically excludes damage incurred in shipment. In the event a product is received in damaged condition, the carrier should be notified immediately. Claims for such damage should be filed with the carrier involved in accordance with the F.O.B. point.

Headquarters:

Valcom, Inc.

5614 Hollins Road Roanoke, VA 24019-5056

Phone: [phone] FAX: [phone]