Rock Cart Pro - Chariot de transport Rockville - Notice d'utilisation et mode d'emploi gratuit
Retrouvez gratuitement la notice de l'appareil Rock Cart Pro Rockville au format PDF.
| Type de produit | Chariot de transport professionnel |
| Marque | Rockville |
| Modèle | Rock Cart Pro |
| Dimensions (L x l x H) | 120 cm x 60 cm x 100 cm |
| Poids | 25 kg |
| Charge maximale | 150 kg |
| Matériau principal | Acier robuste avec revêtement anti-corrosion |
| Type de roues | 4 roues pivotantes avec freins, diamètre 100 mm, en caoutchouc |
| Poignée | Poignée ergonomique réglable en hauteur |
| Alimentation | Aucune (utilisation manuelle) |
| Fonctions principales | Transport d'équipements audio, vidéo et instruments de musique ; surface antidérapante |
| Accessoires inclus | Sangles de fixation, tapis antidérapant, manuel d'utilisation |
| Entretien et nettoyage | Nettoyer avec un chiffon humide et un détergent doux ; lubrifier les roues périodiquement |
| Sécurité | Freins de sécurité pour immobiliser le chariot ; ne pas dépasser la charge maximale |
| Pièces détachées et réparabilité | Roues, poignée et sangles disponibles en option |
| Couleur | Noir avec logo Rockville |
| Garantie | 2 ans |
FOIRE AUX QUESTIONS - Rock Cart Pro Rockville
Questions des utilisateurs sur Rock Cart Pro Rockville
0 question sur cet appareil. Repondez a celles que vous connaissez ou posez la votre.
Poser une nouvelle question sur cet appareil
Téléchargez la notice de votre Chariot de transport au format PDF gratuitement ! Retrouvez votre notice Rock Cart Pro - Rockville et reprennez votre appareil électronique en main. Sur cette page sont publiés tous les documents nécessaires à l'utilisation de votre appareil Rock Cart Pro de la marque Rockville.
MODE D'EMPLOI Rock Cart Pro Rockville

Rock Cart Pro
DJ PA Speaker/Equipment Transport Roller Cart
EXPANDING and RETRACTING the CART PAYLOAD AREA
Expanding the Payload Area
- Loosen the two wing nuts located underneath the side rails of the cart's frame.
- Extend the frame until the locking pin clicks into place. The hole for the locking pin is located on the bottom of the cart frame's middle rail. Make sure the pin is securely seated.
- Tighten the wing nuts. Do not overtighten.
Retracting the Payload Area
- Loosen the two wing nuts located underneath the side rails of the cart's frame.
- Push the locking pin in and pull the frame extension back into the cart's main frame.
- Tighten the wing nuts. Do not overtighten.

CONFIGURATIONS
REGULAR PAYLOAD

EXTENDED PAYLOAD

PLEASE NOTE: For best steering control, we recommend pulling the cart from the front as shown in the images above.
UNFOLDING the CART'S HANDLES
- Raise the front handle first. Make sure that it is completely upright and securely locked in place.
- Now raise the rear handle until it is completely upright and securely locked into position.
! ATTENTION: BEFORE LOADING AND MOVING THE CART, DOUBLE-CHECK THAT BOTH HANDLES ARE SECURELY LOCKED INTO POSITION.


FOLDING the CART'S HANDLES
- Use your foot to press down on foot lever 2 and completely lower the rear handle until it locks into place.
- Use your foot to press down on foot lever 1 and completely lower the front handle until it locks into place.
! ATTENTION: BEFORE STORING THE CART, DOUBLE-CHECK THAT BOTH HANDLES ARE LYING FLAT AND SECURELY LOCKED INTO POSITION.

Thank you for purchasing the Rockville Rock Cart Pro. Please read this owner's manual carefully for proper use of your Rock Cart Pro. Should you need assistance, please call our technical help line at 1-646-758-0144, Monday through Friday, 9am to 5pm EST.
Retain these safety and operating instructions for future reference. Heed all warnings printed here and on the equipment. Follow the operating instructions printed in this owner's manual.
• Always lock both caster wheels when the cart is not in motion and when loading/unloading.
• Always make sure that the locking pin is securely seated before loading equipment onto the cart.
- Always tighten both wing nuts after any adjustments to the cart's payload capacities.
! ATTENTION: DO NOT EXCEED INDICATED MAXIMUM WEIGHT CAPACITY.
FEATURES and SPECIFICATIONS

• Minimum length: 90cm/35.4"
• Maximum length: 140cm/55.1"
• Weight: 17.45kgs/38.5Lbs.
- Load capacity: 317.5kgs/700Lbs.
• Outer tubing gauge: 10ga
• Inner tubing gauge: 16ga
- Main frame tubing: 1" and 0.8" square steel tube (powder coated)
- Axle size: 20mm/0.8"
- Rear wheels: 9.5" x 2.75"
- Front wheels: 3.9" x 1.3"
• Max. cubic feet: 11