KML-250MAH - Machine à glaçons Hoshizaki - Notice d'utilisation et mode d'emploi gratuit

Type de produit	Machine à glaçons modulaire
Marque	Hoshizaki
Modèle	KML-250MAH
Production de glace	250 lb/jour (113 kg/jour)
Type de glace	Glaçons en forme de croissant (crescent)
Dimensions (L x P x H)	560 x 610 x 800 mm
Poids net	45 kg
Alimentation électrique	220-240 V, 50 Hz, 1.5 kW
Réfrigérant	R404A
Capacité du réservoir de glace	45 kg
Fonctions principales	Production automatique, cycle de nettoyage, indicateur de niveau de glace, arrêt automatique
Entretien et nettoyage	Nettoyage du condenseur tous les 3 mois, détartrage tous les 6 mois
Sécurité	Protection contre surchauffe, arrêt automatique en cas de panne
Pièces détachées	Disponibles via service après-vente Hoshizaki
Réparabilité	Indice de réparabilité estimé à 8.5/10

FOIRE AUX QUESTIONS - KML-250MAH Hoshizaki

Comment nettoyer la machine à glaçons KML-250MAH ?

Utilisez un détartrant approuvé pour machine à glaçons. Suivez le cycle de nettoyage automatique décrit dans le manuel. Nettoyez le condenseur avec une brosse douce tous les 3 mois.

Quelle est la production de glace par jour ?

La production est d'environ 250 lb (113 kg) de glace par jour, à une température ambiante de 21°C et une température d'eau de 10°C.

Quelle est la consommation électrique ?

La machine consomme environ 1.5 kW en fonctionnement normal. La consommation exacte dépend des conditions ambiantes.

Comment installer la machine ?

Placez la machine sur une surface plane et stable. Assurez une ventilation adéquate autour de l'appareil. Raccordez l'arrivée d'eau et l'évacuation. Branchez sur une prise 220-240 V avec mise à la terre.

Que faire si la machine ne produit pas de glace ?

Vérifiez d'abord l'alimentation électrique et l'arrivée d'eau. Si tout est normal, le problème peut venir du capteur de niveau de glace ou du compresseur. Consultez la notice pour les codes d'erreur.

Comment régler la taille des glaçons ?

La taille des glaçons est préréglée en usine. Pour la modifier, ajustez le temps de gel via le panneau de contrôle. Consultez le manuel pour les instructions détaillées.

Quel type de réfrigérant utilise la KML-250MAH ?

Le réfrigérant utilisé est le R404A. Assurez-vous que seul un professionnel qualifié intervienne sur le circuit frigorifique.

Faut-il un filtre à eau ?

Il est fortement recommandé d'installer un filtre à eau pour protéger la machine contre les impuretés et le calcaire, ce qui prolonge sa durée de vie.

Comment démarrer la machine après un arrêt prolongé ?

Nettoyez d'abord l'intérieur et les condenseurs. Vérifiez les connexions. Branchez et attendez que le réservoir se remplisse. Le cycle de gel démarrera automatiquement.

Où trouver des pièces détachées pour la KML-250MAH ?

Les pièces détachées sont disponibles auprès des revendeurs agréés Hoshizaki ou sur commande via le service après-vente. Utilisez le numéro de modèle pour identifier les pièces.

MODE D'EMPLOI KML-250MAH Hoshizaki

HOSHIZAKI AMERICA, INC.

MANUFACTURER'S LIMITED LABOR AND PARTS WARRANTY

KM SERIES ICE MACHINES

DB & DM SERIES DISPENSERS

HOSHIZAKI AMERICA, INC. A Georgia corporation with its principal offices at 618 Hwy. 74 South, Peachtree City, Georgia 30269, ("Hoshizaki") warrants to the original owner/user that any KM series commercial ice machine or DB or DM series dispenser manufactured by Hoshizaki (the "Products") shall be free of defects in material or workmanship under normal and proper use and maintenance service as specified by Hoshizaki and upon proper installation and start-up in accordance with the instruction manual supplied with the Product. Proper warranty registration must be completed within 30 days of the original installation date to validate the product warranty. In the event that proper registration has not been completed, the warranty shall begin from the factory ship date or the distributor sold date, whichever is available. The owner/user is responsible to provide valid proof of installation if the unit is installed more than 180 days from the current registration start date. Regardless of the actual installation date, the warranty start date shall not exceed twenty-four (24) months from the factory ship date. The obligation of Hoshizaki and the rights and remedies of the owner/user under this warranty are exclusively limited to (1) the repair or replacement, including labor charges, of parts or assemblies that in Hoshizaki's opinion are defective within three years after original date of installation; (2) the repair or replacement, including labor charges, of a KM Series evaporator that in Hoshizaki's opinion is defective during the two year period after the three year warranty period; (3) the repair or replacement, excluding labor charges, of a KM compressor or air cooled condenser that in the opinion of Hoshizaki is defective during the two year period after the three year warranty period. The labor warranty shall include standard straight time labor charges at the product location only and shall exclude charges for travel time, mileage or other premium charges. Any labor service required to fulfill the warranty obligation must be performed by a refrigeration service company qualified and accepted by Hoshizaki and/or the local Hoshizaki distributor.

This warranty does not include parts or labor coverage for component failure or other damage resulting from:

* External electrical power failure or miswiring to Product for any reason.
* External water supply failure or plumbing problems to the Product for any reason.
* External drain line malfunction.
* Adverse operating conditions as set forth in the owner/user manual for the Product.
* Failure to clean and/or maintain Product as set forth in the owner/user manual for the Product.

All claims for labor or parts must be made through the local Hoshizaki distributor. The defective part for which labor reimbursement is claimed, together with the service invoice, must be returned to the Hoshizaki distributor within fifteen days from date of service to be eligible for labor and parts warranty coverage. All replacement parts must be approved Hoshizaki parts. Incidents of failure that do not require replacement of a part shall be explained in sufficient detail on the service invoice to identify the failure. All claims shall include the product model number, serial number, original date of installation and customer identification.

The foregoing warranty shall not apply to (1) any part or assembly (a) that has been altered, modified, or changed, (b) that has been subjected to misuse, abuse, neglect or accidents, or (c) any Product on which the serial or model number has been removed or altered, or (2) any Product that has been installed and/or maintained inconsistent with Hoshizaki's technical publications, or (3) any Product that has been installed or is located outside the standard warranty coverage area. Warranty valid in United States, Canada, Puerto Rico, and U.S. territories. Contact factory for warranty in other countries.

The five year compressor parts warranty shall not apply when the Product refrigeration system is modified with a condenser, heat reclaimed device, or parts and assemblies other than those manufactured by Hoshizaki unless Hoshizaki has accepted modifications for specific installations in writing.

"LIMITATION OF LIABILITY AND OTHER WARRANTIES"

Hoshizaki assumes no liability for misuse or inadequate maintenance of the Product. In no event shall the user be entitled to recover incidental or consequential damages, including but not limited to, damages for inconvenience, ice purchase, rental or replacement equipment, loss of profits, water damage, or other commercial loss.

Warranties stated above are the only warranties made in connection with the sale and distribution of the Products. ANY AND ALL OTHER EXPRESSED, STATUTORY AND IMPLIED WARRANTIES APPLICABLE TO THE PRODUCT, INCLUDING, WITHOUT LIMITATION, ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR USE ARE EXPRESSLY DISCLAIMED

The warranty information set forth above shall be governed by and construed in accordance with the laws of the State of Georgia and, if applicable, the laws of the United States of America. The warranty, as stated, is extended only to the original owner/user and is not assignable to any other owner or user.

HOSHIZAKI AMERICA, INC.

618 Hwy. 74 South, Peachtree City, Georgia 30269

2A4016-011