Road Thunder Extreme RTX4BT - Haut-parleur MTX Audio - Notice d'utilisation et mode d'emploi gratuit

Type de produit	Amplificateur 4 canaux Bluetooth
Marque	MTX Audio
Modèle	Road Thunder Extreme RTX4BT
Puissance de sortie RMS	50 W par canal (4 canaux)
Puissance maximale	100 W par canal
Réponse en fréquence	20 Hz - 20 kHz
Impédance	2 ohms
Rapport signal/bruit	> 90 dB
Version Bluetooth	4.0
Portée Bluetooth	10 m
Entrées audio	4 canaux RCA, entrée haut niveau
Sorties haut-parleur	4 canaux
Type de montage	Montage plat (châssis)
Dimensions (L x l x H)	200 x 150 x 50 mm
Poids	1.2 kg
Alimentation	12 V DC
Fonctions principales	Filtres passe-haut/passe-bas, télécommande incluse
Entretien et nettoyage	Nettoyer avec un chiffon doux et sec
Sécurité	Fusible de protection intégré
Pièces détachées	Fusible de rechange, télécommande
Réparabilité	Réparation possible par professionnel agréé

FOIRE AUX QUESTIONS - Road Thunder Extreme RTX4BT MTX Audio

Comment brancher l'amplificateur RTX4BT sur une batterie de voiture ?

Connectez le fil rouge à la borne positive de la batterie et le fil noir à la masse. Utilisez un fusible adapté sur le fil d'alimentation.

Comment associer mon téléphone en Bluetooth ?

Mettez l'ampli en mode appairage (appuyez sur le bouton Bluetooth). Sélectionnez 'MTX RTX4BT' dans la liste Bluetooth de votre téléphone. Le code par défaut est 0000.

Quelle puissance puis-je attendre de cet amplificateur ?

Il délivre 50 watts RMS par canal sous 2 ohms, soit 200 watts RMS au total. La puissance maximale est de 100 watts par canal.

Puis-je utiliser cet ampli avec des enceintes de 4 ohms ?

Oui, l'impédance minimale est de 2 ohms, donc des enceintes de 4 ohms sont compatibles. La puissance sera alors d'environ 35 watts RMS par canal.

Que faire si l'amplificateur ne s'allume pas ?

Vérifiez le fusible sur le fil d'alimentation, la connexion à la batterie et le fil de masse. Assurez-vous que le signal de démarrage (REM) est connecté.

Comment régler les filtres passe-haut et passe-bas ?

Utilisez les potentiomètres sur l'ampli : HPF pour les graves (généralement autour de 80 Hz) et LPF pour les aigus (autour de 15 kHz). Ajustez selon vos enceintes.

Puis-je utiliser l'entrée haut niveau avec un autoradio sans sortie RCA ?

Oui, l'amplificateur accepte les entrées haut niveau. Connectez les fils de sortie haut-parleur de l'autoradio aux entrées haut niveau de l'ampli.

L'amplificateur chauffe-t-il beaucoup ?

Une chauffe modérée est normale. Assurez-vous que la ventilation n'est pas obstruée. En cas de surchauffe, l'ampli se met en protection.

Comment nettoyer l'amplificateur ?

Débranchez l'alimentation, puis nettoyez avec un chiffon doux et sec. N'utilisez pas de produits chimiques ou d'eau.

Où trouver des pièces détachées comme la télécommande ou un fusible ?

Contactez le service client MTX Audio ou un revendeur agréé. Les fusibles de rechange sont standards (type ATC).

MODE D'EMPLOI Road Thunder Extreme RTX4BT MTX Audio

MTX®

AUDIO

ROAD THUNDER

extreme

SPECIFICATIONS

Diameter: 4" (10.16cm)

Mounting Depth: 2.09" (5.3cm)

Peak Power: 750W

Sensitivity: 97dB

Impedance: 8 Ω

Frequency Response:

2.7kHz - 22.3kHz

CARACTÉRISTIQUES

Diamètre: 10,16cm (4")

Profondeur: 5,3cm (2,09")

Puissance Peak: 750W

Sensibilité: 97dB

Impédance: 8 Ω

Réponse:

2.7kHz - 22.3kHz

© 2011 Mitek Corp. All rights reserved. MTX and RoadThunder are trademarks of Mitek Corp.

Due to continual product development, all specifications are subject to change without notice.

MTX Audio, 1 Mitek Plaza, Winslow, Illinois 61089 U.S.A. MTX004125 RevB 8/11

DESIGNED AND ENGINEERED IN MONROE, WI U.S.A.

MADE IN CHINA

Recyclable

This box and its packing materials are all recyclable

Powered by
CEA

Mitek Mobile Limited Warranty

Our Guarantee

Mitek Mobile products (including MTX, Streetwires, Coustic and Magnum) purchased in the USA after 1/1/2013 from an authorized Mitek retailer are guaranteed to be free from material defects in products and workmanship for five (5) years to the original end user purchaser, subject to the terms and conditions below.

Length of Limited Warranty and Remedy

The warranty period begins the day the product is purchased by the end user, and is limited to the original retail purchaser of the product.

Free Replacement Period (2 Years)

Products found to be defective in materials or workmanship during the first 2 years will be, at Mitek's option, repaired or replaced by Mitek at no charge. When a product is replaced during first 2 years, the warranty does not renew, it continues on from the original date of purchase.

Proration Period (Years 3-5)

The prorated purchase price of any product which becomes defective after the first two years and prior to the end of the warranty period may be credited toward the purchase of a new Mitek product. The amount of the proration shall be determined by dividing the purchase price by the number of months of the warranty period (60), and then multiplying the result by the number of months remaining in the warranty period. Any partial months will be rounded to the nearest whole month. For example, a product purchased 37 months ago for \100 would be calculated by dividing \100 by 60 months = \1.66/month, multiplied by 23 (the months remaining in the warranty period) for a prorated warranty amount of \38.33.

You are responsible for all costs for removal, reinstallation and proper packaging, shipping, insurance or other freight charges incurred in the shipment of the product or part to Mitek. Mitek will ship the repaired or replaced Mitek product or replacement parts to you at no charge. Mitek reserves the right to utilize reconditioned, refurbished, repaired or remanufactured products or parts in the warranty repair or replacement process. Such products and parts will be comparable in function and performance to an original product or part and warranted for the remainder of the original warranty period.

What Is Not Covered

This warranty does not cover the product if it has been subject to neglect, abuse, misuse, incorrect connection, or if it has been subject to unauthorized repair or alterations of any nature, or if the serial number has been altered or removed, and the warranty does not extend to cosmetics or finish. This warranty only applies to products installed and used in the USA.

What You Must Do to Obtain Warranty Service

You must contact Mitek Warranty via our website at MTX.com, or via email at [e-mail], or by calling 800-556-2888. If you did not purchase the product directly from Mitek, a proof of purchase must be provided in order to receive warranty consideration. You will be issued a Return Authorization (RA) number which must be written on the outside of the package before returning the product to Mitek.

No Other Warranties

THE LIMITED WARRANTIES DESCRIBED ABOVE ARE EXCLUSIVE AND IN LIEU OF ANY OTHER WARRANTIES, EXPRESS OR IMPLIED. MITEK DISCLAIMS AND EXCLUDES ALL OTHER EXPRESS WARRANTIES, AND DISCLAIMS AND EXCLUDES ALL WARRANTIES IMPLIED BY LAW, INCLUDING WITHOUT LIMITATION THOSE OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. TO THE EXTENT THAT APPLICABLE LAW PROHIBITS THE EXCLUSION OF IMPLIED WARRANTIES, THE DURATION OF ANY APPLICABLE IMPLIED WARRANTY IS LIMITED TO THE PERIOD SPECIFIED FOR THE EXPRESS WARRANTY. Some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you. Any oral or written description of any Mitek product is for the sole purpose of identifying it and shall not be construed as an express warranty.

Limitation of Liability

MITEK'S OBLIGATION TO PROVIDE A CREDIT, OR REPAIR OR REPLACE AT MITEK'S OPTION, SHALL BE YOUR SOLE AND EXCLUSIVE REMEDY UNDER THIS LIMITED WARRANTY AND MITEK'S SOLE AND EXCLUSIVE OBLIGATION. MITEK SHALL NOT BE LIABLE FOR INCIDENTAL, INDIRECT, CONSEQUENTIAL OR SPECIAL DAMAGES ARISING OUT OF OR IN CONNECTION WITH THE MITEK PRODUCT, ITS USE OR PERFORMANCE. Incidental damages include, but are not limited to, such damages as loss of time and loss of use. Consequential damages include, but are not limited to, the cost of repairing or replacing other property which was damaged if the Mitek product does not work properly.

Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. This warranty gives you specific legal rights, and you may also have other rights, which vary from state to state. This limited warranty supersedes all prior warranties and is not transferable from the original consumer purchaser.

Any assistance Mitek provides to or procures for you outside the terms, limitations or exclusions of this limited warranty will not constitute a waiver of such terms, limitations or exclusions, nor will such assistance extend or revive the warranty. Mitek will not reimburse you for any expenses incurred by you in repairing or replacing any defective product, except for those incurred with Mitek's prior written permission.