MH2C - Lampe de poche Nitecore - Notice d'utilisation et mode d'emploi gratuit

Type de produit	Lampe de poche rechargeable
Marque	Nitecore
Modèle	MH2C
Dimensions (L x diamètre)	155 mm x 40 mm
Poids	150 g (sans accessoires)
Alimentation	Batterie Li-ion intégrée 5000 mAh, recharge via USB-C
Flux lumineux maximal	1800 lumens (mode Turbo)
Distance de portée	250 mètres
Modes d'éclairage	Turbo, Haute, Moyenne, Basse, SOS, Balise, Stroboscope
Autonomie	Jusqu'à 200 heures (mode Basse), 1h30 (mode Turbo)
Temps de charge	Environ 2 heures (chargeur USB 2A)
Résistance à l'eau	IPX8, étanche jusqu'à 1 mètre
Résistance aux chocs	2 mètres
Matériau du boîtier	Aluminium aéronautique anodisé
Lentille	Verre trempé avec revêtement anti-reflet
Interrupteur	Bouton latéral avec indicateur de niveau de batterie
Fonctions spéciales	Mémorisation du dernier mode, verrouillage électronique
Accessoires inclus	Câble USB-C, dragonne, pince de ceinture
Entretien	Nettoyer avec un chiffon doux et sec ; ne pas utiliser de solvants
Sécurité d'utilisation	Ne pas diriger le faisceau vers les yeux, éteindre avant recharge
Pièces détachées / Réparabilité	Batterie intégrée non remplaçable ; optique et interrupteur non réparables par l'utilisateur
Garantie	2 ans (sous réserve des conditions générales)

FOIRE AUX QUESTIONS - MH2C Nitecore

Comment recharger la lampe Nitecore MH2C ?

Utilisez le câble USB-C fourni et branchez-le sur un chargeur USB standard (5V/2A recommandé). Le voyant clignote pendant la charge et devient fixe une fois complète.

Quelle est l'autonomie de la batterie ?

L'autonomie varie selon le mode : jusqu'à 200 heures en mode Basse, environ 1h30 en mode Turbo. La batterie intégrée de 5000 mAh assure une longue durée.

La Nitecore MH2C est-elle étanche ?

Oui, elle possède une certification IPX8 : elle peut être immergée jusqu'à 1 mètre d'eau pendant 30 minutes. Elle résiste également à la pluie et aux éclaboussures.

Comment changer les modes d'éclairage ?

Appuyez brièvement sur le bouton latéral pour passer d'un mode à l'autre (dans l'ordre : Turbo, Haute, Moyenne, Basse, puis modes spéciaux). Un appui long allume ou éteint la lampe. La lampe mémorise le dernier mode utilisé.

Que faire si la lampe ne s'allume plus ?

Vérifiez d'abord que la batterie est chargée. Branchez-la sur le chargeur pendant au moins 30 minutes. Si elle ne s'allume toujours pas, appuyez sur le bouton pendant 3 secondes pour déverrouiller le mode verrouillage. Si le problème persiste, contactez le service après-vente.

Puis-je utiliser des piles rechargeables standards ?

Non, la lampe dispose d'une batterie Li-ion intégrée non amovible. Elle ne peut être rechargée que via le port USB-C. Aucune pile standard n'est compatible.

Quelle est la garantie de la Nitecore MH2C ?

La garantie est de 2 ans contre tout défaut de fabrication. Les dommages causés par une mauvaise utilisation ou une modification ne sont pas couverts. Conservez votre preuve d'achat.

Comment nettoyer et entretenir ma lampe ?

Utilisez un chiffon doux et sec pour nettoyer le boîtier et la lentille. Évitez les produits chimiques et l'eau sous pression. Vérifiez régulièrement que le port USB-C est exempt de poussière.

La lampe possède-t-elle un mode stroboscope ?

Oui, elle dispose d'un mode Stroboscope ainsi que d'un mode Balise et SOS. Ces modes sont accessibles en appuyant plusieurs fois sur le bouton après le mode Basse.

Où puis-je télécharger la notice complète ?

Vous pouvez télécharger la notice PDF gratuitement sur le site notice-facile.com ou sur le site officiel de Nitecore. Recherchez 'Nitecore MH2C manuel' pour obtenir le document.

MODE D'EMPLOI MH2C Nitecore

NITECORE®

The All-Round Flashlight Expert

Features

• Premium CREE XM-L2 T6 LED
• Maximum output of 800 lumens
• High efficiency regulation circuit
• Maximum runtime of up to 28 hours
• Intelligent charging circuit with voltage detection charges safely and rapidly
- Integrated micro USB charging port is water, dust and impact resistant.
- Multiple output modes are conveniently accessed via rapid rotary switch
- User-defined mode provides customized brightness levels plus strobe and SOS modes.
• Intelligent memory function stores preferred brightness setting
- Broad voltage circuit accepts both rechargeable and non-rechargeable Lithium batteries
- Optimized ultra-precise reflector offers a longer beam distance than competing products
- Waterproof in accordance with IPX8 (submersible to two meters)
- Toughened ultra-clear mineral glass with anti-reflective coating
- Constructed from aerospace-grade aluminum alloy
• HAIII military grade hard-anodized
• Reverse polarity protection
• Stainless steel titanium-plated clip
- Anti-rolling design

Dimensions

Length: 150mm (5.9")

Head Diameter: 25.4mm (1")

Tail Diameter: 25.4mm (1")

Weight: 90grams (3.17oz)(without battery)

Accessories

Nitecore 18650 Li-ion battery(NL183),

tactical ring, lanyard, USB cable, clip,

holster, spare switch cap and spare

O-ring

Battery Options

	SIZE	Nominal voltage	Compatible
18650 Rechargeable Li-ion battery	18650	3.7V	Yes (Compatible and can be recharged)
Primary Lithium battery *	CR123	3V	Yes (Compatible but can NOT be recharged)
Rechargeable Li-ion battery *	RCR123	3.7V	Yes (Compatible but can NOT be recharged)

*Warning: Charge 18650 rechargeable Li-ion batteries only, do not attempt to

charge non-rechargeable batteries, CR123 or RCR123 batteries.

Brightness & Runtime

FL1 STANDARD	TURBO	HIGH	MID	LOW	STROBE	SOS
	800 LUMENS	300 LUMENS	130 LUMENS	50 LUMENS	800 LUMENS	800 LUMENS
	2h	3h15min	8h30min	28h	—	—
	1h30min	3h	7h45min	22h	—	—
	190m	121m	78m	47m	—	—
	9300cd	3680cd	1540cd	560cd	—	—
	1.5m (Impact Resistant)
	IPX8, 2m (Waterproof AND Submersible)

NOTICE

Stated data has been measured according to the international flashlight testing standards ANSI/NEMA FL1 using a quality NITECORE 18650 (3.7V 2600mAh) battery or two SYSMAX CR123 (3V 1550mAh) batteries under laboratory conditions. The data may vary due to individual usage habits and environmental conditions.

Operation instructions

Battery installation (see adjacent diagram)

1. Unscrew the tail cap in a counter-clockwise direction.
2. Insert one 18650 battery or two CR123 batteries with the positive pole pointing forward (toward the light head).

NOTE:

Ensure batteries are inserted with the

positive (+) end pointing to the head. The

MH2C will not operate with incorrectly

inserted batteries.

Charging Function

The MH2C is capable of charging a protected 18650 Li-ion battery via the included USB cable. Simply install a protected 18650 Li-ion cell, plugging one end of the USB cable into the flashlight and the other end into a universal USB port / adaptor and the MH2C will take care of the rest.

MH2C User Manual

Charging indicator light

1. Connect the charging cable to the flashlight and the A/C power adapter to the wall outlet as shown in the adjacent image. Fully charging a depleted 18650 battery takes approximately 6 hours.
2. Under normal charging conditions, the red indicator light near the charging port will blink twice every second.
3. If a problem is detected during the charging process, the MH2C will stop charging and the red indicator will blink rapidly. This is usually caused by faulty or incorrectly inserted batteries.
4. When charging is complete, the red indicator will illuminate steadily.

Technical illustration of a mechanical pipe fitting with a clamp and threaded end (no text or symbols)

Caution:

The MH2C needs to be turned on in

order to enter charging mode.

Switching ON/OFF

To switch ON: Press the button on the tailcap until a "click" is heard.

To switch OFF: Press the button on the tailcap a second time until a "click" is heard.

Mode Switching

The Nitecore MH2C has two modes: Turbo and user-defined. These two modes can be changed by simply tightening and loosening the flashlight head. Turbo provides 100% output while user-defined contains five selectable sub-modes.

Turbo Mode

Turbo mode provides an output of 800 lumens and is accessed when the flashlight is switched ON with the head lightly tightened. While in this mode, momentary illumination can be achieved by switching off the flashlight and then half pressing and holding the switch.

Note: After three minutes of use in turbo mode, the flashlight will lower its output automatically to preventing overheating and increase runtime.

User-Defined Mode

User-defined mode is accessed by slightly loosening the flashlight head. In this mode, lightly and rapidly pressing the switch will cycle through brightness and other functions in the following order: "High-Mid-Low-SOS-Strobe". Pressing the switch all the way down will save and memorize a desired setting.

Tips: Make NITECORE MH2C your perfect Multitask Hybrid flashlight.

NITECORE MH2C flashlights essentially have two modes: Turbo mode (100% output) and custom mode. Turbo mode is accessed by tightening the flashlight head while any of the five customizable modes (strobe, SOS, low, medium and high) are selected by loosening the head and rapidly pressing the on/off switch to cycle through the modes. A given mode can be saved by simply turn off the light while in that mode. Real-world examples include: When used as a flashlight around the home, the head can be loosened and low level selected in custom mode, providing long runtimes at a lower light intensity. The same flashlight could then be taken out and used a law-enforcement duty light, with user-defined mode set in strobe, making it easy to alternate between turbo mode and strobe with a simple twist of the flashlight head.

Maintenance

Every 6 months, threads should be wiped with a clean cloth followed by a thin coating of silicon-based lubricant.

Warranty Service

All NITECORE® products are warranted for quality. DOA / defective products can be exchanged for replacement though a local distributor/dealer within the 15 days of purchase. After 15 days, all defective / malfunctioning NITECORE® products will be repaired free of charge for a period of 60 months from the date of purchase. After 60 months, a limited warranty applies, covering the cost of labor and maintenance, but not the cost of accessories or replacement parts. The warranty is nullified in all of the following situations:

1. The product(s) is/are broken down, reconstructed and/or modified by unauthorized parties.
2. The product(s) is/are damaged through improper use.
3. The product(s) is/are damaged by leakage of batteries.

For the latest information on NITECORE® products and services, please contact your national NITECORE® distributor or send an email to [e-mail]

SYSMAX Ind.

SYSMAX Industry Co., Ltd

TEL:

[phone]

FAX:

[phone]

E-mail:

[e-mail]

Web:

www.nitecore.com

Address:

Rm 2601-06, Cent

er, No.5 Xiancun Road, Tianhe

District, Guangzhou, 510623, Guangdong, China

Please follow our facebook for

more info: NITECORE Flashlight