MT40 - Lampe de poche Nitecore - Notice d'utilisation et mode d'emploi gratuit

Type de produit	Lampe de poche tactique
Marque	Nitecore
Modele	MT40
Dimensions (longueur)	150 mm
Diametre de la tete	35 mm
Poids (sans batterie)	100 g
Alimentation	1 pile 18650 ou 2 piles CR123A (non fournies)
Flux lumineux maximal	820 lumens
Portee du faisceau	250 metres
Nombre de modes	5 (Turbo, Haute, Moyenne, Basse, SOS)
Indice d'etancheite	IPX8 (immersion jusqu'a 2 m)
Resistance aux chocs	1 m de chute
Materiau du corps	Aluminium aeronautique anodise
Lentille	Verre mineral traite anti-reflet
Reflecteur	Reflecteur lisse profond
Commutation	Interrupteur arriere et latéral (mode)
Fonction de memorisation	Oui (dernier mode utilise)
Entretien	Nettoyer les contacts avec un chiffon sec ; remplacer les piles si necessaire
Securite	Protection contre les inversions de polarite ; ne pas regarder directement le faisceau
Pieces detachees disponibles	Joint torique, embout, clip de ceinture, piles
Reparabilite	Concu pour etre depanne par un professionnel ; pas de pieces internes accessibles a l'utilisateur
Garantie	2 ans (sauf piles)
Accessoires inclus	Clip de ceinture, joint torique de rechange, cordon

FOIRE AUX QUESTIONS - MT40 Nitecore

Quels types de piles puis-je utiliser avec le Nitecore MT40 ?

Le MT40 accepte une pile lithium-ion 18650 ou deux piles au lithium CR123A. Ne pas melanger des piles de types ou de marques differentes.

Comment changer le mode d'eclairage ?

Appuyez brievement sur le bouton lateral pour passer d'un mode a l'autre (Turbo, Haute, Moyenne, Basse, SOS). L'appareil memorise le dernier mode utilise.

Le Nitecore MT40 est-il etanche ?

Oui, il possede un indice d'etancheite IPX8, ce qui signifie qu'il peut etre immerge jusqu'a 2 metres de profondeur pendant 30 minutes.

Quelle est la portee maximale du faisceau ?

Le faisceau peut atteindre une portee de 250 metres en mode Turbo.

Comment nettoyer ma lampe de poche ?

Utilisez un chiffon doux et sec pour nettoyer l'exterieur. Pour les contacts, un coton-tige avec un peu d'alcool isopropylique peut etre utilise. Ne pas immerger l'appareil en maintenance.

Puis-je remplacer la pile moi-meme ?

Oui, le compartiment a pile est accessible en devissant la queue de la lampe. Assurez-vous de respecter la polarite indiquee.

Que faire si la lampe ne s'allume plus ?

Verifiez d'abord les piles : chargez ou remplacez-les. Nettoyez les contacts si necessaire. Si le probleme persiste, contactez le service client.

La lampe peut-elle rester allumee longtemps en mode Turbo ?

Le mode Turbo genere beaucoup de chaleur. La lampe reduit automatiquement la puissance apres quelques minutes pour proteger les composants.

Quelles sont les precautions de securite a respecter ?

Ne regardez jamais directement le faisceau. Evitez de couvrir la tete de la lampe pendant le fonctionnement. Utilisez uniquement les piles recommandees.

Ou puis-je trouver des pieces detachees ?

Les pieces detachees (joints toriques, embouts, clips) sont disponibles aupres des revendeurs agrees Nitecore ou sur commande speciale.

MODE D'EMPLOI MT40 Nitecore

ALL-ROUND Flashlight Expert

User Manual

Features

• LED Premium CREE XM-L2 T6 LED
• Maximum output of up to 960 lumens
• High efficiency current circuit board
• Maximum runtime of up to 24 hours
- Two rapid switching modes suit various user requirements.
- User-defined mode allows for customized brightness levels and a multitude of functions

• Intelligent memory functions

- Anti-rolling design

- Reverse polarity protection

- Broad voltage drive circuit, compatible with rechargeable and non-rechargeable Li-ion batteries.

- Toughened ultra-clear mineral glass with anti-reflective coating

• Aluminum reflector ensures a smooth and powerful beam

• Aero grade aluminum alloy

• HA III Military grade hard anodized

- Detachable two-way anti-rolling clip

• Purpose-made rhombic knurling for better grip

- IPX-8 standard waterproof (submersible to two meters)

Dimensions

Length: 221.5mm (8.72")

Head Diameter: 50mm (1.97")

Tail Diameter: 25.4mm (1")

Weight: 245grams (8.64oz)(without battery)

Accessories

Clip, tactical ring, lanyard, quality holster, spare plastic cap, and spare O-ring

Battery Options

	SIZE	Nominal voltage	Compatible
Primary Lithium battery	CR123	3V	Y (Recommended)
18650 Rechargeable Li-ion battery	18650	3.7V	Y (Recommended)
Rechargeable Li-ion battery	RCR123	3.7V	Y

Brightness & Runtime

	960LUMENS	550LUMENS	290LUMENS	100LUMENS	NOTICEStated data has been measured according to the international flashlight testing standardsANSI/NEMA FL1 using two quality NITECORE 18650 (3.7V 2600mAh) batteries or four Nitecore CR123 (3V 1700mAh) batteries under laboratory conditions. The data may vary due to individual usage habits and environmental conditions.
	1h30 min	3h30 min	7h30 min	24h
	1h30 min	2h45 min	6h30 min	18h30 min
	430m(Beam Distance)
	46000cd(Peak Beam Intensity)
	1.5m(Impact Resistant)
	IPX-8, 2m(Waterproof AND Submersible)

NITECORE (SYSMAX) is a member of PLATO, participating in and helping to develop the ANSI FL1 standard of measurement. Product testing data is in accordance with these internationally recognized scientific standards.

Operation instructions

Battery installation (as the picture shows)

1. Unscrew the tail cap in a counter-clockwise direction.

2. Insert two 18650 batteries or four CR123 batteries with the positive pole pointing forward (toward the light head).

WARNING

Ensure batteries are inserted

with the positive (+) end

pointing to the head. The

MT40 will not operate with

incorrectly inserted batteries.

Switching ON/OFF

Switch ON: Press the button on the tailcap until a "click" is heard.

Switch OFF: Press the button at the tailcap until a second time until a "click" is heard.

Mode Switching

The Nitecore MT40 has two modes: Turbo and user-defined. These two modes can be changed by simply tightening and loosening the flashlight head. Turbo provides 100% output while user-defined users contains five selectable sub-modes.

Turbo Mode

Turbo mode is accessed when the MT40 flashlight is switched ON and the head lightly tightened. While in this mode, momentary illumination can be achieved by switching off the flashlight and then half pressing and holding the switch. Momentary illumination can be used as a flashing signal indicator or apply to various tactical applications.

User-Defined Mode

User-defined mode is accessed by slightly loosening the flashlight head. In this mode, lightly and rapidly pressing the switch will cycle through brightness and other functions in the following order: "High-Mid-Low- SOS-Strobe". Pressing the switch all the way down will save and memorize a desired setting.

Tips: Make NITECORE MT40 your perfect multi-task flashlight.

NITECORE MT40 flashlights essentially have two modes: Turbo mode (100% output) and custom mode. Turbo mode is accessed by tightening the flashlight head while any of one of the four customizable modes (strobe, low, medium and high) are selected by loosening the head and rapidly pressing the on/off switch to cycle through the modes. A given mode can be saved by simply turn off the light while in that mode. Real-world examples include: When used as a flashlight around the home, the head can be loosened and low level selected in custom mode, providing long runtimes at a lower light intensity. The same flashlight could then be taken out and used a law-enforcement duty light, with user-defined mode set in strobe, making it easy to alternate between turbo mode and strobe with a simple twist of the flashlight head.

Maintenance

Every 6 months, threads should be wiped with a clean cloth followed by a thin coating of silicon-based lubricant.

Warranty Service

All NITECORE ^® products are warranted for quality. DOA / defective products can be exchanged for replacement though a local distributor/dealer within the 15 days of purchase. After 15 days, all defective / malfunctioning NITECORE ^® products will be repaired free of charge for a period of 60 months from the date of purchase. After 60 months, a limited warranty applies, covering the cost of labor and maintenance, but not the cost of accessories or replacement parts. The warranty is nullified in all of the following situations:

1. The product(s) is/are broken down, reconstructed and/or modified by unauthorized parties.
2. The product(s) is/are damaged through improper use.
3. The product(s) is/are damaged by leakage of batteries.

For the latest information on NITECORE ^® products and services, please contact your national NITECORE ^® distributor or send an email to [e-mail]

Please follow our facebook for more info: NITECORE Flashlights

SYSMAX Industry Co., Ltd.

TEL: [phone]

FAX: [phone]

E-mail: [e-mail]

Web: www.nitecore.com

Address: Rm1401, Glorious Tower, 850 East Dongfeng Road,

Guangzhou, China 510600