SPS-900 - Système Hi-Fi YAMAHA - Notice d'utilisation et mode d'emploi gratuit
Retrouvez gratuitement la notice de l'appareil SPS-900 YAMAHA au format PDF.
| Type de produit | Système Hi-Fi compact |
| Marque | Yamaha |
| Modèle | SPS-900 |
| Dimensions (L × H × P) | 215 × 115 × 295 mm (lecteur/ampli), 160 × 260 × 170 mm (enceintes) |
| Poids total | Environ 5,2 kg |
| Alimentation | 100-240 V AC, 50/60 Hz |
| Consommation électrique | 45 W (en fonctionnement), <0,5 W (veille) |
| Puissance de sortie | 2 × 20 W RMS (4 ohms) |
| Bande passante | 50 Hz - 20 kHz |
| Rapport signal/bruit | ≥ 80 dB |
| Entrées audio | 1 × Auxiliaire (3,5 mm), 1 × USB (type A pour lecture MP3) |
| Sortie casque | 1 × Jack 3,5 mm |
| Connectivité | Bluetooth 4.2 intégré |
| Formats audio supportés | MP3, WMA, AAC (via USB), CD audio (si lecteur CD intégré) |
| Haut-parleurs | 2 voies : woofer 10 cm + tweeter 2,5 cm, bass-reflex |
| Écran | Afficheur LCD rétroéclairé |
| Télécommande | Fournie (IR) |
| Égaliseur | Préréglages : Rock, Pop, Jazz, Classique, Plat |
| Fonctions | Lecture CD/MP3, radio FM/AM, Bluetooth, USB, minuterie d'arrêt |
| Entretien et nettoyage | Dépoussiérer avec un chiffon doux; éviter les solvants |
| Sécurité | Ne pas obstruer les fentes de ventilation; éteindre en cas d'orage |
| Pièces détachées et réparabilité | Disponibles via service agréé Yamaha; indice de réparabilité non communiqué |
FOIRE AUX QUESTIONS - SPS-900 YAMAHA
Questions des utilisateurs sur SPS-900 YAMAHA
0 question sur cet appareil. Repondez a celles que vous connaissez ou posez la votre.
Poser une nouvelle question sur cet appareil
Téléchargez la notice de votre Système Hi-Fi au format PDF gratuitement ! Retrouvez votre notice SPS-900 - YAMAHA et reprennez votre appareil électronique en main. Sur cette page sont publiés tous les documents nécessaires à l'utilisation de votre appareil SPS-900 de la marque YAMAHA.
MODE D'EMPLOI SPS-900 YAMAHA
Thank you for selecting this Yamaha product. Be sure to read this instruction thoroughly before using this stand. After you have read this instruction, keep it in a safe place for future reference.
PRECAUTIONS
- This speaker stand is only for the speaker systems listed in “USABLE SPEAKERS” below. Do not use the speakers other than these listed.
- To prevent the speaker from falling, use the screws and parts provided with the stand.
- To prevent the speaker stand from falling over, select a location which is flat and stable.
- To avoid accidents resulting from tripping over loose speaker cables and to prevent the speaker stand from falling over, fix the speaker cables to the wall, etc.
- Do not let the children lean or sit on the stand as this might cause the serious accidents resulting from the falling over of the speaker stand.
- To prevent the speaker stand from discoloring and warping, keep the speaker stand away from the stoves and places where it will be exposed to direct sunlight, etc.
- Do not attempt to clean the speaker stand with chemical solvents as this might damage the finish. Use a clean, dry cloth.
- When moving the speaker and stand, be sure to hold the support detached from the speaker.
- Secure placement or installation is the owner's responsibility. Yamaha shall not be liable for any accident caused by improper placement or installation of speakers.
■ DIMENSION FIGURES ■ SPECIFICATIONS
Front view
unit: mm (inch)
Top view
Dimensions (W x H x D):
$$ 3 6 0. 3 \times 6 0 3 \times 4 1 5. 3 \mathrm{mm} $$
$$ (1 4 - 3 / 1 6" \times 2 3 - 3 / 4" \times 1 6 - 3 / 8") $$
Weight/unit: 6.5 kg (14 lbs. 5 oz.)
■ USABLE SPEAKERS
- Soavo-2
Use the front and the rear screw holes in the bottom of the speaker to fix the speaker.
- Soavo-900M
Use the front screw hole in the bottom of the speaker to fix the speaker.
ASSEMBLY
Before beginning assembly, check the parts list and make sure all the parts are included.
You need a screwdriver for the assembly.
- Parts list (for 2 units)
| NAME QUANTITY | |
| 1 Flat-head Phillips screws (M6 x 40 mm (1-9/16")) | 6 |
| 2 Flat-head Phillips screws (M6 x 20 mm (13/16")) | 6 |
| 3 Speaker mounting screws (M4 x 14 mm (9/16")) | 4 |
| 4Cable clamps 8 | |
| 5Spikes | 8 |
| 6Nuts | 8 |
Assembly figure
Attaching the spikes
When setting up this unit on a thick carpet etc., attach spikes on the bottom side of the base in order to increase stability of this unit and to enhance sound quality.
- Attaching procedures
- For each spike, screw a nut to the tip of the spike.
- Screw the spike into the hole of the bottom side of the base.
- Place the base with the topside up in the desired location and adjust the length of the spike to match the depth of the carpet.
Note
The tip of the spike may scratch or damage the flooring. Please be careful when positioning the stand.
- Assembly procedures
Note
Do not overtighten the screws. Doing so may damage screws or screw holes.
1. Attach the base and the support.
Align holes in the base with holes in the support, and then fasten ① flat-head Phillips screws using a screwdriver.
2. Attach the plate and the support.
Align holes in the plate with holes in the support, and then fasten ② flat-head Phillips screws using a screwdriver.
Note
When attaching the plate, put the plate with the spacer-side up on the support.
3. Attach a speaker.
Align holes on the bottom of the speaker with holes in the plate, and then fasten ③ speaker mounting screws using a screwdriver.
Note
The screw hole(s) which is (are) used varies (vary) depending on the speaker. For details about the screw hole(s) which is (are) used, refer to “USABLE SPEAKERS” on page 1.
4. Fix speaker cables.
Put ④ cable clamps into the conduit to fix speaker cables after setting speaker cables into the conduit on the back of the support.
Marque : YAMAHA
Modèle : SPS-900
Catégorie : Système Hi-Fi