TISSOT Couturier Chrono - Montre

Couturier Chrono - Montre TISSOT - Notice d'utilisation et mode d'emploi gratuit

Retrouvez gratuitement la notice de l'appareil Couturier Chrono TISSOT au format PDF.

📄 2 pages Français FR Télécharger 💬 Question IA 10 questions ⚙️ Specs
Notice TISSOT Couturier Chrono - page 1
Choisissez votre langue et indiquez votre email : nous vous enverrons une version traduite specifiquement.
Type de produit Montre-bracelet chronographe analogique
Marque Tissot
Modèle Couturier Chrono
Mouvement Quartz suisse à pile
Type d'affichage Analogique (aiguilles)
Fonctions Heure, minute, seconde, chronographe (1/10 s, 30 min), date
Diamètre du boîtier Environ 42 mm
Épaisseur du boîtier Environ 11 mm
Poids Environ 85 g (selon bracelet)
Matériau du boîtier Acier inoxydable
Verre Saphir antireflet
Alimentation Pile (type SR920SW ou équivalent)
Résistance à l'eau 30 m (3 ATM) – résiste aux éclaboussures, pas à la nage
Entretien et nettoyage Nettoyer avec un chiffon doux et sec ; éviter tout contact avec l'eau et les produits chimiques
Sécurité Fermoir déployant sécurisé
Pièces détachées et réparabilité Bracelet interchangeable, pile remplaçable par un horloger
Garantie 2 ans (pièces et main-d'œuvre)

FOIRE AUX QUESTIONS - Couturier Chrono TISSOT

Quelle est la pile de la montre Tissot Couturier Chrono ?
La pile utilisée est généralement une SR920SW (ou équivalente). Le remplacement doit être effectué par un horloger pour garantir l'étanchéité.
Comment régler la date sur la Tissot Couturier Chrono ?
Tirez la couronne en position de réglage (deuxième cran) et tournez-la dans le sens horaire jusqu'à la date souhaitée. Évitez de régler la date entre 21h et 3h pour ne pas endommager le mécanisme.
Comment utiliser le chronographe ?
Appuyez sur le poussoir à 2 heures pour démarrer/arrêter le chronomètre. Appuyez sur le poussoir à 4 heures pour remettre à zéro. Le compteur totalise jusqu'à 30 minutes avec des fractions de 1/10 de seconde.
Quelle est l'étanchéité de la montre Couturier Chrono ?
La montre est étanche jusqu'à 30 mètres (3 ATM). Cela signifie qu'elle résiste aux éclaboussures d'eau, mais il est déconseillé de la porter sous la douche ou en nageant.
Comment nettoyer ma montre Tissot Couturier Chrono ?
Utilisez un chiffon doux et sec pour essuyer le boîtier et le bracelet. N'utilisez jamais de solvants, de détergents ou d'eau. Pour un nettoyage en profondeur, consultez un horloger.
Puis-je changer le bracelet moi-même ?
Oui, le bracelet est interchangeable via un système de barrettes à ressort. Utilisez un outil adapté pour retirer les barrettes. Attention à ne pas rayer le boîtier.
Que faire si la montre s'arrête ?
Vérifiez d'abord si la pile est déchargée. Si le remplacement de la pile ne résout pas le problème, il peut s'agir d'un problème mécanique ; contactez un horloger agréé Tissot.
La montre a-t-elle une garantie ?
Oui, les montres Tissot sont garanties 2 ans contre tout défaut de fabrication à compter de la date d'achat. Conservez le certificat de garantie et la facture.
Comment remettre à l'heure ma montre ?
Tirez la couronne en position de réglage (deuxième cran). Tournez-la dans le sens souhaité pour ajuster l'heure. Poussez la couronne à fond après réglage.
Où trouver le manuel d'utilisation complet ?
Le manuel d'utilisation est disponible en téléchargement gratuit sur le site notice-facile.com ou sur le site officiel de Tissot. Vous pouvez également le demander à votre revendeur.

Questions des utilisateurs sur Couturier Chrono TISSOT

0 question sur cet appareil. Repondez a celles que vous connaissez ou posez la votre.

Poser une nouvelle question sur cet appareil

L'email reste privé : il sert seulement à vous prévenir si quelqu'un répond à votre question.

Aucune question pour l'instant. Soyez le premier à en poser une.

Téléchargez la notice de votre Montre au format PDF gratuitement ! Retrouvez votre notice Couturier Chrono - TISSOT et reprennez votre appareil électronique en main. Sur cette page sont publiés tous les documents nécessaires à l'utilisation de votre appareil Couturier Chrono de la marque TISSOT.

MODE D'EMPLOI Couturier Chrono TISSOT

Automatic chronographs

User's Manual

TACRYMMETER MON 30 automatic 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50

Display and functions

① Hour hand
② Minute hand
③ Small seconds hand
④ Date display
⑤ Day display (depending on models)

Chronograph :

⑥ Central 60-seconds counter hand
⑦ 30 minute counter hand
⑧ 6 hour/12 hour counter hand (depending on models)
⑨ Tachometric scale (depending on models)
10 Stop/Start push button for timing/chronometer functions
11eset push button on counters

Crown with 3 positions (12):

1 Winding position (not pulled out)
II Setting position for day/date (unscrewed*, half pulled out)
III Setting position for time (unscrewed*, completely pulled out)

* Models with a screwed crown

TISSOT Couturier Chrono - Crown with 3 positions (12): - 1

IA Initial position (screwed down, not pulled out)
IB Winding position (unscrewed, not pulled out)

Congratulations

We would like to congratulate you on having chosen a self-winding chronograph TISSOT ^® , one of the most highly renowned Swiss brands in the world.

Meticulously designed, using only the highest quality materials and components, your chronograph is protected against shock loads, variations in temperature, water and dust.

In the chronograph function, this model is able to time events lasting up to 12 hours, displaying all the results precisely to the nearest 1/10th of a second.

To ensure that your chronograph operates with perfect precision for many years to come, we advise you to pay very careful attention to the advice provided hereafter.

Usage / Settings

Models with a screwed crown

To ensure that they remain water-resistant, some models are fitted with a screwed crown. Before setting the time or date* or day*, you must first unscrew the crown into position IB before you can pull it out into position II or III.

Important : After each operation, you must always screw the crown back down to ensure that your watch remains water-resistant.

Winding

Crown in position I/IB, not pulled out

Manual winding is necessary if you have not been wearing your watch for some considerable period of time. To restart it, you only need to turn the crown a few times (clockwise), or to tilt your watch from side to side a few times. To restore the power reserve of your watch to more than 42 hours, you need to turn the crown about 32 times (clockwise).

Whenever you wear your watch, the automatic mechanism is wound every time you move your wrist.

Setting the time

Carefully pull the crown into position III ; the seconds hand 3) stops at this point. Turn the crown forwards or backwards until the hands display the correct time. Once the hour hand passes the 12 o'clock position, you can see if it indicates midnight (the date changes at this point) or midday (the date does not change).

Advice on how to synchronise your watch

To synchronise the seconds hand (3) with an official time signal (radio, TV, Internet), pull the crown into position[1]; the seconds hand stops at this point. At the tone, press the crown back into position (and tighten it down if you have a model with a screwed crown).

Fast correction of the date\* and day\*

Important: Do not set the date* and/or the day* between 10 pm and 2 am (the movement is in the process of changing the date at these times).

Pull the crown into position II and turn it clockwise until your watch display the correct date (4) and turn it anticlockwise to change the day setting (5)*. During this operation, your watch will continue to function normally, so you will not need to alter the time.

* According to model

Chronograph

Chronograph function

Press the Stop/Start push button 10) to start the timing operation. Press the Stop/Start push button (10) again to stop the timing operation. The timing operation restarts when you press the Stop/Start push button 10) again (time is added), or the three chronograph hands (6, 7 and 8) can be reset to zero by pressing the push button (11). This is only used to reset the chronograph hands to zero.

Speedometer (depending on the model)

The speedometer is used to measure the speed of an object which is moving at a constant speed. Start the timing operation and stop it again once you have covered a distance of 1 km. The chronograph hand then points at a numeral on the tachometric scale, indicating the speed in km/h.

Care and maintenance

We would advise you to clean your watch regularly (except for the leather strap) using a soft cloth and warm soapy water. After immersion in salty water, rinse it in fresh water and leave it to dry completely.

Do not leave it anywhere where it might be subjected to major variations in temperature or humidity, in direct sunlight or near strong magnetic fields.

To benefit from the highest standards of service and to ensure your guarantee remains in force, please always contact an approved TISSO® representative or retailer.

The high-quality mechanism of your TISSOT ^® watch will give you complete satisfaction for many years provided that you take proper care of it. However, we would advise you to have your watch inspected every 3 to 4 years by an approved TISSOT ^® representative or retailer.

Assistant notice
Powered by Anthropic
En attente de votre message
Informations produit

Marque : TISSOT

Modèle : Couturier Chrono

Catégorie : Montre