CP-EX300N - Projecteur HITACHI - Notice d'utilisation et mode d'emploi gratuit
Retrouvez gratuitement la notice de l'appareil CP-EX300N HITACHI au format PDF.
| Type de produit | Projecteur LCD |
| Marque | Hitachi |
| Modèle | CP-EX300N |
| Résolution native | XGA (1024 x 768) |
| Luminosité | 3000 lumens ANSI |
| Rapport de contraste | 2000:1 |
| Type de lampe | 230 W UHP |
| Durée de vie de la lampe | 3000 heures (mode normal) / 5000 heures (mode économique) |
| Alimentation | 100-240 V CA, 50/60 Hz |
| Consommation électrique | 290 W (max) |
| Dimensions (L x H x P) | 306 x 83 x 249 mm |
| Poids | 3,2 kg |
| Connectivité | VGA, HDMI, S-Vidéo, Composite, Audio |
| Fonctions principales | Zoom manuel, mise au point manuelle, correction trapézoïdale |
| Entretien et nettoyage | Nettoyer le filtre à air régulièrement |
| Sécurité | Verrou Kensington |
| Pièces détachées | Lampe de rechange (modèle DT01371) |
| Réparabilité | Lampe remplaçable par l'utilisateur |
FOIRE AUX QUESTIONS - CP-EX300N HITACHI
Questions des utilisateurs sur CP-EX300N HITACHI
0 question sur cet appareil. Repondez a celles que vous connaissez ou posez la votre.
Poser une nouvelle question sur cet appareil
Téléchargez la notice de votre Projecteur au format PDF gratuitement ! Retrouvez votre notice CP-EX300N - HITACHI et reprennez votre appareil électronique en main. Sur cette page sont publiés tous les documents nécessaires à l'utilisation de votre appareil CP-EX300N de la marque HITACHI.
MODE D'EMPLOI CP-EX300N HITACHI
Thank you for purchasing this projector.
Please read through this manual before using this product, in order to use safely and utilize well the product.
⚠ WARNING ▶ Before using this product, be sure to read all manuals for this product. After reading them, store them in a safe place for future reference.
▶Heed all the warnings and cautions in the manuals or on the product.
▶ Follow all the instructions in the manuals or on the product.
NOTE • In this manual, unless any comments are accompanied, “the manuals” means all the documents provided with this product, and “the product” means this projector and all the accessories came with the projector.
Contents
First of all ....
Entries and graphical symbols explanation .....2
Important safety instruction ....2
Regulatory notices ......
About Electro-Magnetic Interference ....3
About Waste Electrical and Electronic Equipment ...4
Contents of package......
Preparing for the remote control ......
Arrangement ....
Connecting with your devices ....
2 Connecting power supply 8
Turning on the power 9
Adjusting the projector's elevator ..... 10
3 Displaying the picture 11
Turning off the power 12
Replacing the lamp 13
4 Cleaning and replacing the air filter .. 15
5 Using the CD manual 16
6 Specifications 17
7 Troubleshooting
- Warranty and after-service .... 18
First of all
Entries and graphical symbols explanation
The following entries and graphical symbols are used for the manuals and the product as follows, for safety purpose. Please know their meanings beforehand, and heed them.
⚠ WARNING This entry warns of a risk of serious personal injury or even death.
△CAUTION This entry warns of a risk of personal injury or physical damage.
NOTICE This entry notices of fear of causing trouble.
Important safety instruction
The followings are important instructions for safely using the product. Be sure to follow them always when handling the product. The manufacturer assumes no responsibility for any damage caused by mishandling that is beyond normal usage defined in these manuals of this projector.
⚠ WARNING ▶ Never use the product in or after an abnormality (ex. giving off smoke, smelling strange, took a liquid or an object inside, broken, etc.) If an abnormality should occur, unplug the projector urgently.
▶ Situate the product away from children and pets.
▶ Keep small parts away from children and pets. If swallowed, consult a physician immediately for emergency treatment.
▶ Do not use the product when there is fear of a thunderbolt.
▶ Unplug the projector from the power outlet if the projector is not used for the time being.
▶ Do not open or remove any portion of the product, unless the manuals direct it. For internal maintenance, leave it to your dealer or their service personnel.
▶ Use only the accessories specified or recommended by the manufacturer.
▶ Do not modify the projector or accessories.
▶ Do not let any things or any liquids enter to the inside of the product.
▶ Do not wet the product.
▶ Do not place the projector where any oils, such as cooking or machine oil, are used. Oil may harm the product, resulting in malfunction, or falling from the mounted position.
▶ Do not apply a shock or pressure to this product.
- Do not place the product on an unstable place such as the uneven surface or the leaned table.
- Do not place the product unstably. Place the projector so that it does not protrude from the surface where the projector is placed on.
- Remove all the attachments including the power cord and cables, from the projector when carrying the projector.
▶ Do not look into the lens and the openings on the projector, while the lamp is on.
▶ Do not approach the lamp cover and the exhaust vents, while the projection lamp is on. Also after the lamp goes out, do not approach them for a while, since too hot.
Regulatory notices
About Electro-Magnetic Interference
In CANADA
This Class B digital apparatus complies with Canadian ICES-003.
In the US, and other places where the FCC regulations are applicable
Declaration of Conformity
Trade name HITACHI
Model Number CP-EX250N, CP-EX300N, CP-EW250N, CP-EW300N
Responsible Party Hitachi America, Ltd.
Address 900 Hitachi way, Chula Vista, CA 91914-3556 U.S.A.
Telephone Number +1 -800-448-2244
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
INSTRUCTIONS TO USERS: This equipment complies with the requirements of FCC (Federal Communication Commission) equipment provided that the following conditions are met. Some cables have to be used with the core set. Use the accessory cable or a designated-type cable for the connection. For cables that have a core only at one end, connect the core to the projector.
CAUTION: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
Regulatory notices (continued)
About Waste Electrical and Electronic Equipment
The mark is in compliance with the Waste Electrical and Electronic Equipment Directive 2002/96/EC (WEEE).
The mark indicates the requirement NOT to dispose the equipment including any spent or discarded batteries or accumulators as unsorted municipal waste, but use the return and collection systems available. If the batteries or accumulators included with this equipment, display the chemical symbol Hg, Cd, or Pb, then it means that the battery has a heavy metal content of more than 0.0005% Mercury or more than, 0.002% Cadmium, or more than 0.004% Lead.
Contents of package
Your projector should come with the items shown below. Check that all the items are included. Require of your dealer immediately if any items are missing.
(1) Remote control with two AA batteries
(2) Power cord
(3) Computer cable
(4) User's manuals (Book x1, CD x1)
(1)
(2)
(3)
(4)
⚠ WARNING ▶ Keep small parts away from children and pets. Take care not to put in the mouth. If swallowed, consult a physician immediately for emergency treatment.
NOTE • Keep the original packing materials for future reshipment. Be sure to use the original packing materials when moving the projector. Use special caution for the lens. • The projector may make a rattling sound when tilted, moved or shaken, since a flap to control the air flow inside of the projector has moved. Be aware that this is not a failure or malfunction.
Preparing for the remote control
Please insert the batteries into the remote control before using it. If the remote control starts to malfunction, try to replace the batteries. If you will not use the remote control for long period, remove the batteries from the remote control and store them in a safe place.
- Holding the hook part of the battery cover, remove it.
- Align and insert the two AA batteries (HITACHI MAXELL, Part No.LR6 or R6P) according to their plus and minus terminals as indicated in the remote control.
- Replace the battery cover in the direction of the arrow and snap it back into place.
natural_image
Line drawing of a hand holding a handheld device with an arrow indicating motion (no text or symbols)1
natural_image
Illustration of a hand holding a cylindrical object with a label '2' (no text or symbols on the object itself)
natural_image
Line drawing of a hand holding a small object with an arrow pointing downward (no text or symbols)3
⚠ WARNING ▶ Always handle the batteries with care and use them only as directed. Improper use may result in battery explosion, cracking or leakage, which could result in fi re, injury and/or pollution of the surrounding environment.
- When replacing the batteries, replace both of the batteries with new batteries of the same type. Do not use a new battery with a used battery.
- Be sure to use only the batteries specified. Do not use batteries of different types at the same time. Do not mix a new battery with used one.
- Make sure the plus and minus terminals are correctly aligned when loading a battery.
- Keep a battery away from children and pets.
- Do not recharge, short circuit, solder or disassemble a battery.
- Do not place a battery in a fire or water. Keep batteries in a dark, cool and dry place.
- If you observe battery leakage, wipe out the leakage and then replace a battery. If the leakage adheres to your body or clothes, rinse well with water immediately.
- Obey the local laws on disposing the battery.
Arrangement
Refer to tables T-1 or T-2 and figures F-1 and F-2 at the end of this manual to determine the screen size and projection distance. The values shown in the table are calculated for a full size screen.
① Screen size (diagonal)
(b) Projection distance ( ± 10%, from the projector's end)
c1, c2 Screen height (±10%)
- If the projector is used at an altitude of about 1600 m (5250 feet) or higher, set ALTITUDE of the SERVICE item in the OPTION menu to HIGH. Otherwise, set it to NORMAL. If the projector is used with a wrong setting, it may cause damage to the projector itself or the parts inside.
⚠ WARNING ▶ Install the projector where you can access the power outlet easily.
▶ Install the projector in a stable horizontal position.
- Do not use any mounting accessories except the accessories specified by the manufacturer. Read and keep the manuals of the accessories used.
- For special installation such as ceiling mounting, be sure to consult your dealer beforehand. Specific mounting accessories and services may be required.
- Do not put the projector on its side, front or rear position.
- Do not attach nor place anything on the projector unless otherwise specified in the manual.
▶ Do not install the projector near thermally conductive or flammable things.
▶ Do not place the projector where any oils, such as cooking or machine oil, are used.
▶ Do not place the projector in a place where it may get wet.
⚠️CAUTION ▶Place the projector in a cool place with sufficient ventilation.
- Keep a space of 30 cm or more between a side of the projector and other objects such as walls.
- Do not stop up, block nor cover the projector's vent holes.
- Do not place the projector at places that are exposed to magnetic fields, doing so can cause the cooling fans inside the projector to malfunction.
▶ Avoid placing the projector in smoky, humid or dusty place. - Do not place the projector near humidifiers.
NOTICE ▶ Position the projector to prevent light from directly hitting the projector's remote sensor.
▶ Do not place the product in a place where radio interference may be caused.
▶ Check and correct the setting for ALTITUDE of SERVICE in the OPTION menu according to the usage environment. For details, see User's Manual - Operating Guide.
Connecting with your devices
Before connecting the projector to a device, consult the manual of the device to confirm that the device is suitable for connecting with this projector and prepare the required accessories, such as a cable in accord with the signal of the device. Consult your dealer when the required accessory did not come with the product or the accessory is damaged.
After making sure that the projector and the devices are turned off, perform the connection, according to the following instructions. Refer to figures F-3 to F-5 at the end of this manual. For details, see User's Manual - Operating Guide.
Before connecting the projector to a network system, be sure to read User's Manual - Network Guide too.
⚠ WARNING ▶ Use only the appropriate accessories. Otherwise it could cause a fire or damage the projector and devices.
- Use only the accessories specified or recommended by the projector's manufacturer. It may be regulated under some standard.
- Neither disassemble nor modify the projector and the accessories.
- Do not use the damaged accessory. Be careful not to damage the accessories. Route a cable so that it is neither stepped on nor pinched out.
⚠️CAUTION ▶For a cable with a core at only one end, connect the end with the core to the projector. That may be required by EMI regulations.
▶ Before connecting the projector to a network system be sure to obtain the consent of the administrator of the network.
▶ Do not connect the LAN port to any network that might have the excessive voltage.
NOTE • Do not turn on or off the projector while connected to a device in operation, unless that is directed in the manual of the device.
- Some input ports are selectable in the use. For details, see User's Manual - Operating Guide.
- Be careful not to mistakenly connect a connector to a wrong port.
Connecting power supply
- Put the connector of the power cord into the AC (AC inlet) of the projector.
- Firmly plug the power cord's plug into the outlet. In a couple of seconds after the power supply connection, the POWER indicator will light up in steady orange.
Please remember that when the DIRECT POWER ON function activated, the connection of the power supply make the projector turn on.
⚠ WARNING ▶ Please use extra caution when connecting the power cord, as incorrect or faulty connections may result in fire and/or electrical shock.
- Do not touch the power cord with a wet hand.
- Only use the power cord that came with the projector. If it is damaged, consult your dealer to get a new one. Never modify the power cord.
- Only plug the power cord into an outlet whose voltage is matched to the power cord. The power outlet should be close to the projector and easily accessible. Remove the power cord for complete separation.
- Do not distribute the power supply to multiple devices. Doing so may overload the outlet and connectors, loosen the connection, or result in fire, electric shock or other accidents.
- Connect the ground terminal for the AC inlet of this unit to the ground terminal of the building using an appropriate power cord (bundled).
NOTICE ▶This product is also designed for IT power systems with a phase-to-phase voltage of 220 to 240 V.
Turning on the power
- Make sure that the power cord is firmly and correctly connected to the projector and the outlet.
- Make sure that the POWER indicator is steady orange.
- Press the STANDBY/ON button on the projector or the remote control.
The projection lamp will light up and the POWER indicator will begin blinking in green. When the power is completely on, the indicator will stop blinking and light in steady green.
⚠ WARNING ▶A strong light is emitted when the projector's power is on. Do not look into the lens of the projector or look inside of the projector through any of the projector's openings.
NOTE • Please power on the projector prior to the connected devices. • The projector has the DIRECT POWER ON function, which can make the projector automatically turn on. For more information, please see User's Manual - Operating Guide.
Adjusting the projector's elevator
Using the Front elevator foot can tilt the projector in order to project at a suitable angle to the screen, elevating the front side of the projector within 12 degrees.
The elevator foot is adjustable while pushing the elevator button.
- Holding the projector, push the elevator button to loose the elevator foot.
- Release the elevator button in order to lock the elevator foot.
- If necessary, the elevator foot can be manually twisted to make more precise adjustments. Hold the projector when twisting the foot.
natural_image
Line drawing of hands operating a mechanical device with a circular component and a pointer (no text or symbols)Elevator button
⚠️CAUTION ▶Do not handle the elevator button without holding the projector, since the projector may drop down.
▶ Do not tilt the projector other than elevating its front within 12 degrees using the elevator foot. A tilt of the projector exceeding the restriction could cause malfunction or shortening the lifetime of consumables, or the projector itself.
When the place to put the projector is slightly uneven to the left or right, use the Rear elevator foot to place the projector horizontally. A spacer is installed on the Rear elevator foot at the time of shipment, and the projector is ready for use. If necessary, detach the spacer, and the elevator foot can be manually twisted to make more precise adjustments.
⚠ WARNING ▶ Keep the spacer away from children and pets. Be careful not to let them swallow the spacer. If swallowed consult a physician immediately for emergency treatment.
NOTE • After the foot is adjusted, it is possible to return it to the state of the shipment with a spacer. It is recommended to keep the spacer and reuse it when relocating the projector.
Displaying the picture
- Activate your signal source. Turn the signal source on, and make it send the signal to the projector.
- Press the INPUT button on the projector. Each time you press the button, the projector switches its input port in turn. You can also use the remote control to select an input signal.
Press the VIDEO button for selecting an input signal from the HDMI or VIDEO port, or the COMPUTER button for selecting an input signal from the COMPUTER IN1 or COMPUTER IN2 port.
- Use the VOLUME + / VOLUME - buttons to adjust the volume.
To have the projector silent, press the MUTE button on the remote control. - Press the ASPECT button on the remote control. Each time you press the button, the projector switches the mode for aspect ratio in turn.
- Use the ZOOM ring to adjust the screen size.
- Use the FOCUS ring to focus the picture.
VOLUME+ button
VOLUME- button
MUTE button
ENSOLID
VIDEO button
COMPUTER button
ASPECT button
⚠️CAUTION ▶If you wish to have a blank screen while the projector's lamp is on, use the BLANK function. (see User's Manual - Operating Guide)
Taking any other action may cause the damage on the projector.
(continued on next page)
NOTE • The ASPECT button does not work when no proper signal is inputted.
- For the details of how to adjust the picture, please see User's Manual - Operating Guide.
- There may be some noise and/or the screen may flicker for a moment when an operation is made. This is not a malfunction.
Turning off the power
- Press the STANDBY/ON button on the projector or the remote control.
The message “Power off?” will appear on the screen for about 5 seconds.
- Press the STANDBY/ON button again while the message appears.
The projector lamp will go off, and the POWER indicator will begin blinking in orange. Then the POWER indicator will stop blinking and light in steady orange when the lamp cooling is complete.
Do not turn the projector on for about 10 minutes or more after turning it off. Also, do not turn the projector off shortly after turning it on. Such operations might cause the lamp to malfunction or shorten the lifetime of some parts including the lamp.
⚠ WARNING ▶ Do not touch around the lamp cover and the exhaust vents during use or just after use, since it is too hot.
▶ Remove the power cord for complete separation. The power outlet should be close to the projector and easily accessible.
NOTE • Please power off the projector after any connected devices are powered off.
- This projector has the AUTO POWER OFF function that can make the projector turn off automatically. For more information, please see User's Manual - Operating Guide.
Replacing the lamp
A lamp has finite product life. Using the lamp for long periods of time could cause the pictures darker or the color tone poor. Note that each lamp has a different lifetime, and some may burst or burn out soon after you start using them.
Preparation of a new lamp and early replacement are recommended. To prepare a new lamp, make contact with your dealer and tell the lamp type number.
Type number : CP-EX250N/CP-EX300N:DT01433 CP-EW250N/CP-EW300N:DT01491
-
Turn the projector off, and unplug the power cord. Allow the projector to cool for at least 45 minutes.
-
Prepare a new lamp. If the projector is mounted on a ceiling, or if the lamp has broken, also ask the dealer to replace the lamp.
In case of replacement by yourself, follow the following procedure.
-
Loosen the screw (marked by arrow) of the lamp cover and then slide and lift the lamp cover to the side to remove it.
-
Loosen the 2 screws (marked by arrow) of the lamp, and slowly pick up the lamp by the handle. Never loosen any other screws.
-
Insert the new lamp, and retighten firmly the 2 screws of the lamp that are loosened in the previous process to lock it in place.
-
While putting the interlocking parts of the lamp cover and the projector together, slide the lamp cover back in place. Then firmly fasten the screw of the lamp cover.
-
Turn the projector on and reset the lamp time using the LAMP TIME item in the OPTION menu.
(1) Press the MENU button to display a menu. (2) Point at the ADVANCED MENU in the menu using the ▼/▲ button, then press the ▶ button.
(3) Point at the OPTION in the left column of the menu using the ▼/▲button, then press the ▶ button.
(4) Point at the LAMP TIME using the ▼/▲ button, then press the ▶ button. A dialog will appear.
(5) Press the ▶ button to select "OK" on the dialog. It performs resetting the lamp time.
natural_image
Line drawing of a rectangular electronic device with a grid pattern and an arrow indicating rotation (no text or symbols)
natural_image
Line drawing of a portable projector with ventilation slots and a label '6' (no text or symbols on the device itself)⚠️CAUTION ▶Do not touch any inner space of the projector, while the lamp is taken out.
NOTE • Please reset the lamp time only when you have replaced the lamp, for a suitable indication about the lamp.
Replacing the lamp (continued)
HIGH VOLTAGE
HIGH TEMPERATURE HIGH PRESSURE
⚠ WARNING
The projector uses a high-pressure mercury glass lamp. The lamp with a loud bang, or burn out, if jolted or scratched, handled down over time. Note that each lamp has a different lifetime, and last or burn out soon after you start using them. In addition, if the lamp is possible for shards of glass to fly into the lamp housing, and running mercury and dust containing fine particles of glass to escape a motor's vent holes.
▶ About disposal of a lamp: This product contains a mercury lamp; do not put it in a trash. Dispose of it in accordance with environmental laws.
- For lamp recycling, go to www.lamprecycle.org (in the US).
- For product disposal, consult your local government agency or www.eiae.org (in the US) or www.epsc.ca (in Canada).
For more information, ask your dealer.
Disconnect the plug from the power outlet
- If the lamp should break (it will make a loud bang when it does), unplug the power cord from the outlet, and make sure to request a replacement lamp from your local dealer. Note that shards of glass could damage the projector's internals, or cause injury during handling, so please do not try to clean the projector or replace the lamp yourself.
- If the lamp should break (it will make a loud bang when it does), ventilate the room well, and make sure not to inhale the gas or fine particles that come out from the projector's vent holes, and not to get them into your eyes or mouth.
- Before replacing the lamp, turn the projector off and unplug the power cord, then wait at least 45 minutes for the lamp to cool sufficiently. Handling the lamp while hot can cause burns, as well as damaging the lamp.
- Never unscrew except the appointed (marked by an arrow) screws.
- Do not open the lamp cover while the projector is suspended from a ceiling. This is dangerous, since if the lamp's bulb has broken, the shards will fall out when the cover is opened. In addition, working in high places is dangerous, so ask your local dealer to have the lamp replaced even if the bulb is not broken.
- Do not use the projector with the lamp cover removed. At the lamp replacing, make sure that the screws are screwed in firmly. Loose screws could result in damage or injury.
- Use only the lamp of the specified type. Use of a lamp that does not meet the lamp specifications for this model could cause a fire, damage or shorten the life of this product.
- If the lamp breaks soon after the first time it is used, it is possible that there are electrical problems elsewhere besides the lamp. If this happens, consult your local dealer or a service representative.
- Handle with care: jolting or scratching could cause the lamp bulb to burst during use.
- Using the lamp for long periods of time, could cause it dark, not to light up or to burst. When the pictures appear dark, or when the color tone is poor, please replace the lamp as soon as possible. Do not use old (used) lamps; this is a cause of breakage.
Cleaning and replacing the air fi Iter
Please check and clean the air fi lter periodically. When the indicators or a message prompts you to clean the air fi lter, comply with it as soon as possible. The air fi lter has two kinds of fi lters inside. Replace the fi lters when they are damaged or too soiled. To prepare the new fi lters, make contact with your dealer and tell the following type number.
Type number : UX38851 (Filter set)
When you replace the lamp, please replace the air fi Iter. An air fi Iter of specified type will come together with a replacement lamp for this projector.
- Turn the projector off, and unplug the power cord. Allow the projector to sufficiently cool down.
2 Use a vacuum cleaner on and around the filter cover. - Pick and pull up the filter cover knobs to take it off.
- Use a vacuum cleaner for the filter vent of the projector.
- Take the fi ne fi Iter out while holding the fi Iter cover. It is recommended to leave the coarse fi Iter in the fi Iter cover as it is.
- Use a vacuum cleaner on both sides of the fi ne fi Iter while holding it so it will not be sucked in. Use a vacuum cleaner for the inside of the fi Iter cover to clean up the coarse fi Iter. If the fi Iters are damaged or heavily soiled, replace them with new ones.
- Place the fine filter on the coarse one.
- Install the filter unit back into the projector.
- Turn the projector on and reset the filter time using the FILTER TIME item in the EASY MENU.
(1) Press the MENU button to display a menu.
(2) Point at the FILTER TIME using the ▼/▲ button, then press the ▶ button. A dialog will appear.
(3) Press the ▶ button to select "OK" on the dialog. It performs resetting the fi Iter time.
ENGLISH
natural_image
Line drawing of a car air conditioner panel with grid layout and ventilation slots (no text or symbols)Filter cover knobs
Fine fi Iter
⚠ WARNING ▶ Before taking care of the air filter, make sure the power cable is not plugged in, then allow the projector to cool sufficiently.
▶ Use only the air fi Iter of the specifi ed type. Do not use the projector without the air fi Iter or the fi Iter cover. It could result in a fi re or malfunction to the projector
▶ Clean the air fi Iter periodically. If the air fi Iter becomes clogged by dust or the like, internal temperatures rise and could cause a fi re, a burn or malfunction to the projector.
NOTE • Please reset the filter time only when you have cleaned or replaced the air filter, for a suitable indication about the air filter.
- The projector may display the message such as “CHECK THE AIR FLOW” or turn off the projector, to prevent the internal heat level rising.
Using the CD manual
The other manuals for this product are written into the included CD-ROM titled "User's Manual (detailed)". Before using the CD-ROM, please read the following to ensure the proper use.
■ System requirements
The system for using the CD-ROM requires the following.
Windows®: OS:Microsoft Windows® XP, Windows Vista®, Windows®7 or later
Macintosh®: OS:Mac OS 10.2 or later
CD-ROM/DVD-ROM drive:
Applications: Microsoft ® Internet Explorer ® 6.0 or later
Adobe
® Acrobat ® Reader ® 8.0 or later
■ How to use the CD
- Insert CD into computer's CD-ROM/DVD-ROM drive.
Windows®: In a while, Web browser automatically starts. Start up window comes up.
Macintosh®: (1) Double-click on the "PROJECTORS" icon appeared on the desktop screen.
(2) When “main.html” file is clicked, Web browser will start and Initial window will appear.
- Click the model name of your projector first, and then click language you want from the displayed list. The User's manual (detailed) will open.
⚠️CAUTION ▶Only use the CD-ROM in a computer CD/DVD drive. The CD-ROM is designed for computer use only. NEVER INSERT THE CD-ROM INTO A NON-COMPUTER CD/DVD PLAYER! Inserting the CD-ROM into an incompatible CD/DVD drive may produce a loud noise, which in turn MAY RESULT IN EAR AND SPEAKER DAMAGE!
- After using CD-ROM, please put it into CD case and keep it. Please keep the CD neither in direct sunlight nor in a high temperature and high humidity environment.
NOTE • The information in the CD-ROM is subject to change without notice. Please check our website where you may find the latest information for this projector. (18)
- No responsibility is taken for any obstacle and defect to hardware and software of your computer as a result of the use of the CD-ROM.
- All or Any part of the information in the CD-ROM must not be copied, reproduced or republished without notice to our company.
Specifications
| Item Specification | |
| Product name Liquid crystal projector | |
| Liquid Crystal Panel | CP-EX250N/CP-EX300N:786,432 pixels (1024 horizontal x 768 vertical)CP-EW250N/CP-EW300N:1,024,000 pixels (1280 horizontal x 800 vertical) |
| Lamp | CP-EX250N/CP-EX300N: 215W UHPCP-EW250N/CP-EW300N : 225W UHP |
| Speaker 16W mono | |
| Power supply/Rated current | AC 100-120 V: 3.4 A, AC 220-240 V: 1.7 A |
| Power consumption | AC 100-120 V: 330W, AC 220-240 V: 310W |
| Temperature range | 5 ~ 35 °C (Operating) |
| Size | 320 (W) x 85 (H) x 245 (D) mm* Not including protruding parts.Refer to figure F-6 at the back of this manual. |
| Weight (mass) approx. 3.0 kg | |
| Ports | COMPUTER IN1 D-sub 15 pin mini jack x1COMPUTER IN2 / MONITOR OUT D-sub 15 pin mini jack x1HDMI HDMI connector x1VIDEO RCA jack x1AUDIO IN (R, L) RCA jack x2AUDIO OUT (R, L) RCA jack x2CONTROL D-sub 9 pin plug x1USB TYPE B USB type B connector x1LAN RJ45 jack x1 |
| Optional parts | Lamp: DT01433DT01491Filter set: UX38851Mounting accessory: HAS-EX300 (Bracket for ceiling mount) HAS-204L (Fixing adaptor for low ceilings) HAS-304H (Fixing adaptor for high ceilings)Laser remote control: RC-R008* For more information, please consult your dealer. |
Troubleshooting - Warranty and after-service
If an abnormal operation (such as smoke, strange odor or excessive sound) should occur, stop using the projector immediately.
Otherwise if a problem occurs with the projector, first refer to “Troubleshooting” of User’s Manual - Operating Guide and Network Guide, and run through the suggested checks.
If this does not resolve the problem, please consult your dealer or service company. They will tell you what warranty condition is applied.
Please check the following web address where you may find the latest information for this projector.
| Product information and Manuals : | http://www.hitachi-america.us/projectors |
| Production information : | http://www.hitachidigitalmedia.com |
| Direct link to manual download : | http://www.hitachiserviceeu.com/support/guides/userguides.htm |
NOTE • The information in this manual is subject to change without notice.
- The illustrations in this manual are for illustrative purposes. They may differ slightly from your projector.
- The manufacturer assumes no responsibility for any errors that may appear in this manual.
- The reproduction, transfer or copy of all or any part of this document is not permitted without express written consent.
Trademark acknowledgment
- Mac , Macintosh and Mac OS are registered trademarks of Apple Inc.
- Adobe and Acrobat , Reader are registered trademarks of Adobe Systems Incorporated.
- Microsoft , Internet Explorer , Windows , Windows Vista and Windows 7 are registered trademarks of Microsoft Corporation in the U.S. and/or other countries.
- HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.
- Blu-ray Disc™ and Blu-ray™ are trademarks of Blu-ray Disc Association. All other trademarks are the properties of their respective owners.
End User License Agreement for the Projector Software
- Software in the projector consists of the plural number of independent software modules and there exist our copyright or/and third party copyrights for each of such software modules.
- Be sure to read “End User License Agreement for the Projector Software” which is separated document. (in the CD)
T-1 CP-EX250N/CP-EX300N
(1024 x 768) (±10%)
| aScreen size (diagonal) | 4:3 screen 16:9 screen | ||||||||||||||||
| bProjection distance | c1Screen height | c2Screen height | bProjection distance | c1Screen height | c2Screen height | ||||||||||||
| min. max. min. max. | |||||||||||||||||
| type (inch) | m m | inch m | inch cm | inch | cm inch | m inch | m inch | cm | inch cm | inch | |||||||
| 30 0 | 8 0.9 | 34 | 1.0 | 41 | 39 | 15 | 7 | 3 | 0.9 | 37 | 1.1 | 45 | 36 | 14 | 1 | ||
| 40 1 | 0 1.2 | 46 | 1.4 | 56 | 52 | 21 | 9 | 3 | 1.3 | 50 | 1.5 | 61 | 49 | 19 | 1 | ||
| 50 | 1.3 | 1.5 | 58 | 1.8 | 70 | 65 | 26 | 11 | 4 | 1.6 | 63 | 1.9 | 76 | 61 | 24 | 1 | 1 |
| 60 1 | 5 1.8 | 70 | 2.1 | 84 | 78 | 31 | 13 | 5 | 1.9 | 76 | 2.3 | 92 | 73 | 29 | 2 | 1 | |
| 70 | 1.8 | 2.1 | 82 | 2.5 | 99 | 91 | 36 | 15 | 6 | 2.3 | 89 | 2.7 | 108 | 85 | 34 | 2 | 1 |
| 80 | 2.0 | 2.4 | 94 | 2.9 | 113 | 105 | 41 | 17 | 7 | 2.6 | 102 | 3.1 | 123 | 97 | 38 | 2 | 1 |
| 90 | 2.3 | 2.7 | 106 | 3.2 | 127 | 118 | 46 | 20 | 8 | 2.9 | 115 | 3.5 | 139 | 109 | 43 | 3 | 1 |
| 100 | 2.5 | 3.0 | 118 | 3.6 | 142 | 131 | 51 | 22 | 9 | 3.3 | 128 | 3.9 | 154 | 122 | 48 | 3 | 1 |
| 120 | 3.0 | 3.6 | 142 | 4.3 | 170 | 157 | 62 | 26 | 10 | 3.9 | 154 | 4.7 | 186 | 146 | 57 | 4 | 1 |
| 150 | 3.8 | 4.5 | 177 | 5.4 | 213 | 196 | 77 | 33 | 13 | 4.9 | 193 | 5.9 | 232 | 182 | 72 | 4 | 2 |
| 200 | 5.1 | 6.0 | 237 | 7.2 | 285 | 261 | 103 | 44 | 17 | 6.6 | 258 | 7.9 | 311 | 243 | 96 | 6 | 2 |
| 250 | 6.4 | 7.5 | 297 | 9.1 | 357 | 327 | 129 | 54 | 21 | 8.2 | 324 | 9.9 | 389 | 304 | 120 | 7 | 3 |
| 300 | 7.6 | 9.1 | 357 | 10.9 | 428 | 392 | 154 | 65 | 26 | 9.9 | 389 | 11.9 | 467 | 365 | 144 | 9 | 4 |
T-2 CP-EW250N/CP-EW300N
(1280 x 800) (±10%)
| Screen size (diagonal) | 16 : 10 screen | 4 : 3 screen | |||||||||||||||
| Projection distance | Screen height max. | Screen height | Projection distance | Screen height | Screen height | ||||||||||||
| min. max. min. | |||||||||||||||||
| type (inch) | m m | inch m | inch cm | inch | cm inch | inch m | inch m | inch cm | inch cm | inch | |||||||
| 30 | 0.8 | 0.9 | 36 | 1.1 | 44 | 38 | 15 | 3 | 1 | 1.0 | 41 | 1.3 | 50 | 42 | 17 | 3 | 1 |
| 40 | 1.0 | 1.2 | 49 | 1.5 | 59 | 50 | 20 | 4 | 2 | 1.4 | 56 | 1.7 | 67 | 57 | 22 | 4 | 2 |
| 50 | 1.3 | 1.6 | 62 | 1.9 | 74 | 63 | 25 | 5 | 2 | 1.8 | 70 | 2.1 | 84 | 71 | 28 | 5 | 2 |
| 60 | 1.5 | 1.9 | 74 | 2.3 | 89 | 75 | 30 | 6 | 2 | 2.1 | 84 | 2.6 | 101 | 85 | 33 | 7 | 3 |
| 70 | 1.8 | 2.2 | 87 | 2.7 | 105 | 88 | 34 | 7 | 3 | 2.5 | 99 | 3.0 | 119 | 99 | 39 | 8 | 3 |
| 80 | 2.0 | 2.5 | 99 | 3.0 | 120 | 100 | 39 | 8 | 3 | 2.9 | 113 | 3.4 | 136 | 113 | 45 | 9 | 3 |
| 90 | 2.3 | 2.8 | 112 | 3.4 | 135 | 113 | 44 | 9 | 3 | 3.2 | 127 | 3.9 | 153 | 127 | 50 | 10 | 4 |
| 100 | 2.5 | 3.2 | 125 | 3.8 | 150 | 125 | 49 | 10 | 4 | 3.6 | 142 | 4.3 | 170 | 142 | 56 | 11 | 4 |
| 120 | 3.0 | 3.8 | 150 | 4.6 | 181 | 150 | 59 | 12 | 5 | 4.3 | 170 | 5.2 | 205 | 170 | 67 | 13 | 5 |
| 150 | 3.8 | 4.8 | 188 | 5.7 | 226 | 188 | 74 | 14 | 6 | 5.4 | 213 | 6.5 | 256 | 212 | 84 | 16 | 6 |
| 200 | 5.1 | 6.4 | 251 | 7.7 | 302 | 250 | 98 | 19 | 8 | 7.2 | 285 | 8.7 | 342 | 283 | 111 | 22 | 9 |
| 250 | 6.4 | 8.0 | 315 | 9.6 | 378 | 313 | 123 | 24 | 9 | 9.1 | 357 | 10.9 | 428 | 354 | 139 | 27 | 11 |
| 300 | 7.6 | 9.6 | 378 | 11.5 | 454 | 375 | 148 | 29 | 11 | 10.9 | 428 | 13.1 | 514 | 425 | 167 | 33 | 13 |
F-1
- On a horizontal surface
F-2
- Suspended from the ceiling
Computer
F-4
flowchart
graph TD
A["Monitor"] --> B["RGB IN"]
A --> C["USB TYPEB"]
A --> D["COMPUTER IN1"]
A --> E["COMPUTER IN2/MONITOR OUT"]
A --> F["CONTROL"]
A --> G["L"]
A --> H["R"]
A --> I["AC"]
A --> J["LAN"]
A --> K["HDMI"]
A --> L["AUDIO OUT"]
A --> M["VIDEO"]
A --> N["COMPONENT"]
A --> O["Y"]
A --> P["Cb/Pb"]
A --> Q["Cn/Pr"]
Speakers (with an amplifier)
[unit: mm]
- Contents
- First of all
- Important safety instruction
- Regulatory notices
- In CANADA
- In the US, and other places where the FCC regulations are applicable
- Declaration of Conformity
- Regulatory notices (continued)
- Contents of package
- Preparing for the remote control
- Arrangement
- Connecting with your devices
- Connecting power supply
- Turning on the power
- Adjusting the projector's elevator
- Displaying the picture
- Turning off the power
- Replacing the lamp
- Type number : CP-EX250N/CP-EX300N:DT01433 CP-EW250N/CP-EW300N:DT01491
- Replacing the lamp (continued)
- HIGH VOLTAGE
- HIGH TEMPERATURE HIGH PRESSURE
- ⚠ WARNING
- Cleaning and replacing the air fi Iter
- Type number : UX38851 (Filter set)
- Using the CD manual
- ■ System requirements
- CD-ROM/DVD-ROM drive:
- ■ How to use the CD
- Troubleshooting - Warranty and after-service
- Trademark acknowledgment
- F-1
- F-2
Marque : HITACHI
Modèle : CP-EX300N
Catégorie : Projecteur