V-2972 - Interphone Valcom - Notice d'utilisation et mode d'emploi gratuit
Retrouvez gratuitement la notice de l'appareil V-2972 Valcom au format PDF.
| Type de produit | Interphone |
| Marque | Valcom |
| Modèle | V-2972 |
| Dimensions (L x H x P) | 150 x 80 x 30 mm |
| Poids | 200 g |
| Alimentation | 12 V DC via adaptateur secteur (inclus) |
| Matériau | Plastique ABS blanc |
| Couleur | Blanc |
| Fonctions principales | Communication bidirectionnelle, sonnerie, déverrouillage de porte à distance |
| Portée | Jusqu'à 50 m en espace libre |
| Nombre de postes | 1 poste intérieur + 1 platine de rue |
| Type de câblage | 2 fils (sans polarité) |
| Installation | Murale (platine de rue) et sur table ou mur (poste intérieur) |
| Niveau sonore | Sonnerie réglable (haut/faible) |
| Entretien et nettoyage | Nettoyer avec un chiffon doux et sec. Ne pas utiliser de produits abrasifs. |
| Sécurité | Ne pas exposer à l'humidité ou aux intempéries. Utiliser uniquement en intérieur pour le poste intérieur. |
| Pièces détachées et réparabilité | Pièces disponibles auprès du fabricant. Réparation par un professionnel recommandée. |
| Température de fonctionnement | De -10 °C à +40 °C |
FOIRE AUX QUESTIONS - V-2972 Valcom
Questions des utilisateurs sur V-2972 Valcom
0 question sur cet appareil. Repondez a celles que vous connaissez ou posez la votre.
Poser une nouvelle question sur cet appareil
Téléchargez la notice de votre Interphone au format PDF gratuitement ! Retrouvez votre notice V-2972 - Valcom et reprennez votre appareil électronique en main. Sur cette page sont publiés tous les documents nécessaires à l'utilisation de votre appareil V-2972 de la marque Valcom.
MODE D'EMPLOI V-2972 Valcom
V-2972 CALL SWITCH
INTRODUCTION
The V-2972 Call Switch was designed to be used with Talkback Page Control Units with the remote calling feature. The V-2972 provides a momentary spring return rocker switch for connection to customer provided signaling equipment.
DIMENSIONS/WEIGHT
- 4.50" H x 2.75" W x 1.50" D
(11.43cm H x 6.99cm W x 3.81cm D)
• 0.2 lbs. (.09 kg)
FEATURES
- Designed to fit in a standard single-gang electrical box.
- No external power source required.
- White "Call" button for normal call.
- Satin finished one-gang stainless steel plate.
CONNECTIONS/SETUP
- Connect switch inputs from control unit to V-2972 as shown in connection diagram.
- Connections are made by factory supplied 3 inch insulated pigtails that connect to push-on style terminals.
- Place V-2972 over standard single-gang electrical box with minimum depth of 2 inches and fasten in place using the two #6-32 screws provided.

TECHNICAL ASSISTANCE
When trouble is reported, verify that there are no shorts or grounds on cabling.
Assistance in troubleshooting is available from the factory. When calling, you should have a VOM, a telephone test set available and call from the job site. Call (540) 563-2000 and press 1 for Technical Support or visit our website at http://www.valcom.com.
Valcom equipment is not field repairable. Valcom, Inc. maintains service facilities in Roanoke, VA. Should repairs be necessary, attach a tag to the unit clearly stating company name, address, phone number, contact person and the nature of the problem. Send the unit to:
Valcom, Inc. Repair and Return Dept. 5614 Hollins Road Roanoke, VA 24019-5056

WARRANTY
Warranty information may be found on our website at www.valcom.com/warranty.