ST50E i-Straight - Lisseur BABYLISS - Notice d'utilisation et mode d'emploi gratuit

Type de produit	Lisseur à cheveux
Marque	BaByliss
Modèle	ST50E i-Straight
Dimensions (L x l x H)	25 x 3 x 3 cm
Poids	300 g
Alimentation	220-240 V ~ 50/60 Hz
Puissance	45 W
Type de plaque	Céramique
Température réglable	Oui, de 160 à 230 °C
Chauffe rapide	30 secondes
Arrêt automatique	Oui, après 60 minutes d'inactivité
Cordon rotatif	Oui
Longueur du cordon	1.8 m
Couleur	Noir avec accents rose doré
Fonctions principales	Lissage, bouclage, frisage
Entretien et nettoyage	Nettoyer les plaques avec un chiffon humide après utilisation, ne pas immerger dans l'eau
Sécurité	Arrêt automatique, surface chaude, protection contre la surchauffe
Pièces détachées et réparabilité	Pièces disponibles auprès du service client BaByliss, réparation conseillée par un professionnel
Garantie	2 ans
Fabrication	Chine

FOIRE AUX QUESTIONS - ST50E i-Straight BABYLISS

Comment régler la température sur le BaByliss ST50E i-Straight ?

Utilisez les boutons +/- situés sur le manche pour augmenter ou diminuer la température. L'affichage numérique montre la température en degrés Celsius.

Combien de temps faut-il pour que l'appareil chauffe ?

Le lisseur atteint la température de fonctionnement en environ 30 secondes.

Le BaByliss ST50E i-Straight a-t-il un arrêt automatique ?

Oui, l'appareil s'éteint automatiquement après 60 minutes d'inactivité pour plus de sécurité.

Puis-je utiliser le lisseur sur cheveux mouillés ?

Non, il est recommandé de lisser les cheveux parfaitement secs pour éviter de les abîmer.

Comment nettoyer les plaques du lisseur ?

Débranchez l'appareil, laissez-le refroidir, puis essuyez les plaques avec un chiffon doux et humide. N'utilisez pas de produits abrasifs.

Que faire si le voyant clignote ?

Un voyant clignotant peut indiquer que l'appareil chauffe ou qu'une erreur est détectée. Consultez la notice pour les codes spécifiques. Généralement, attendez que la température soit stable.

Quelle est la différence entre le ST50E i-Straight et un lisseur classique ?

Le ST50E i-Straight offre une chauffe rapide, une température réglable précise et des plaques céramique pour un lissage en douceur, avec un design ergonomique.

Quels types de cheveux peut-on lisser avec cet appareil ?

Il convient à tous les types de cheveux, des plus fins aux plus épais, grâce à la plage de température de 160 à 230 °C.

Le cordon est-il rotatif ?

Oui, le cordon pivote à 360 degrés pour faciliter les mouvements lors du coiffage.

Où puis-je trouver des pièces de rechange pour mon lisseur ?

Contactez le service client BaByliss ou visitez leur site web pour commander des pièces détachées comme les plaques ou le cordon.

MODE D'EMPLOI ST50E i-Straight BABYLISS

i-Straight Ballylss qualite professionelle Ballylss professional quality ST50E

FRANCIS
FRANCIS
FRANCIS
FRANCIS
FRANCIS
FRANCIS
FRANCIS
FRANCIS
FRANÇAIS
FRANÇAIS
FRANÇAIS
FRANÇAIS
FRANÇAIS
FRANÇAIS
FRANÇAIS
FRANÇAIS
FRANÇAIS
FRANÇAIS
FRANÇAIS
FRANCOUS
FRANCOUS
FRANCOUS
FRANCOUS
FRANCOUS
FRANCOUS
FRANCOUS
FRANCOUS
FRANCOUS
FRANCOUS
FRANCOUS
FRANÇAIS
FRANÇAIS
FRANÇAIS
FRANÇAIS
FRANÇAIS
FRANÇAIS
FRANÇAIS
FRANÇAIS
FRANÇAIS
FRANÇAIS
FRANÇAIS
FRANÇAIS
FRANÇAIS
FRANÇAIS
FRANÇAIS
FRANÇAIS
FRANÇAIS
FRANÇAIS
FRANÇAIS
FRANÇAIS
FRANÇAIS
FRANÇAIS
FRANÇAIS
FRANÇAIS
FRANÇAIS
FRANÇAIS
FRANÇAIS
FRANÇAIS
FRANÇAIS
FRANÇAIS
FRANÇAIS
FRANÇAIS
FRANÇAIS

TÜRKÇE
On Butler producer, Hovors, standardised raw material used in the first 10% of the U.S. market for the last 10% of the U.S. market.
On Butler production, Hovors, standardised raw material used in the first 10% of the U.S. market for the last 10% of the U.S. market.
On Butler production, Hovors, standardised raw material used in the first 10% of the U.S. market for the last 10% of the U.S. market.
On Butler production, Hovors, standardised raw material used in the first and last 10% of the U.S. market for the last 10% of the U.S. market.
On Butler production, Hovors, standardised raw material used in the first and last 10% of the U.S. market for the last 10% of the U.S. market.
On Butler production, Hovors, standardised raw material used in the first and last 10% of the U.S. (U.S.) market for the last 10% of the U.S. market.
On Butler production, Hovors, standardised raw material used in the first and last 10% of the U.S. market for the last 10% of the U.S. market.
On Butler production, Hovors, standardised raw material used in the first and last 10% of the U.S. market for the last 10% of U.S. market.
On Butler production, Hovors, standardised raw material used in the first and last 10% of the U.S. market for the last 10% of the U.S. market.
On Butler production, Hovors, standardised raw material used in the first and last 10% of the U.S. market for the last 10% of the U.S. market.
On Butier production, Hovors, standardised raw material used in the first and last 10% of the U.S. market for the last 10% of the U.S. market.
On Butier production, Hovors, standardised raw material used in the first and last 10% of the U.S. market for the last 10% of the U.S. market.
On Butier production, Hovors, standardised raw materials used in the first and last 10% of the U.S. market for the last 10% of the U.S. market.
On Butier production, Hovors, standardised raw materials used in the first and last 10% of the U.S. market for the last 10% of the U.S. market.
On Butier production, Hovors, standardised raw materials used in the first and last 10%, in which it is used to use a specific method to use a specific method to use a specific method to use a specific method to use a specific method to use a specific method to use a specific method to use a specific method to use a specific method to use a specific method to use a specific method to use a specific method to use a specific method to use a specific method to use a specific method to use a specific method to use a specific method to use a specific method to use a specific method to use a specific method to use a specific methods to use a specific method to use a specific method to use a specific method to use a specific method to use a specific method to use a specific method to use a specific method to use a specific method to use a specific method to use a specific method to use a specific method to use a specific method to use a specific method to use a specific method to use a specific method to use a specific method to use a specific method to use a specific method to use a specific method to use a specific方法
On Butier production, Hovors, standardised raw material used in the first and last 10% of the U.S. market for the last 10% of the U.S. market for the last 10% of the U.S. market for the last 10% of the U.S. market for the last 10% of the U.S. market for the last 10% of the U.S. market for the last 10% of the U.S. market for the last 10% of the U.S. market for the last 10% of the U.A.S. market for use:
On Butier production, Hovors, standardised raw material used in the first and last 10% of the U.S. market for the last 10% of the U.S. market for the last 10% of the U.S. market for the last 10% of the U.S. market for the last 10% of the U.S. market for the last 10% of the U.S. market for the last10% of U.S.'s value:
On Butier production, Hovors, standardised raw material used in the first and last 10% of the U.S. market for the last 10% of the U.S. market for the last 10% of the U.S. market for the last 10% of the U.S. market for the last 10% of the U.S.'s value:
On Butier production, Hovors, standardised raw material used in the first and last 10% of the U.S. market for the last 10% of the U.S. market for the last 10% of the U.S.'s value:
On Butier production, Hovors, standardised raw material used in the first and last 10% of the U.S.'s value:
On Butier production, Hovors, standardised raw materials used in the first and last 10% of the U.S.'s value:
On Butier production, Hovors, standardised raw materials used in the first and last 10% of the U.S.'s value:
On Butier production, Hovors, standardised raw materials used in the first and last 10% of the U.S.'s value:
On Butier production, Hovors, standardisation raw materials used in the first and last 10% of the U.S.'s value:
On Butier production, Hovors, standardised raw materials used in the first and last 10% of the U.S.'s value:
On Butier production, Hovors, standardised raw materials used in the first and last 10% of the U.S.'s value:
On Butier production, Hovors,, standardised raw materials used in the first and last 10% of the U.S.'s value:
On Butier production, Hovors,, standardised raw materials used in the first and last 10% of the U.S.'s value:
On Butier production, Hovors,, standardised raw materials used in the first and last 10% of the U.S.'s value:
On Butier production, Hoveors,, standardised raw materials used in the first and last 10% of the U.S.'s value:
On Butier production, Hoveors,, standardised raw materials used in the first and last 10% of the U.S.'s value:
On Butier production, Hoveors,, standardised raw materials used in the first and last 10% of the U.S.'s value:
On Butier production,Hoveors,,standardised raw materials used in both its own and its own parts;
On Butier production,Hoveors,,standardised raw materials used in both its own and its own parts;
On Butier production,Hoveors,,standardised raw materials used in both its own and its own parts;
On Butier production,Hoveors,,standardised raw materials used in both its own and its own parts;
On Butier production,Hoveors,,standardised raw materials used in both its own and its own parts;
Onbuter production,Hoveors,,standardised raw materials used in both its own and its own parts;
Onbuter production,Hoveors,,standardised raw materials used in both its own and its own parts;
Onbuter production,Hoveors,,standardised raw materials used in both its own and its own parts;
Onbuter production,Hoveors,,standardised raw materials used in both its own and its own parts;
Onbuter production,Hoveor,,standardised raw materials used in both its own and its own parts;
Onbuter production,Hoveor,,standardised raw materials used in both its own and its own parts;
Onbuter production,Hoveor,,standardised raw materials used in both its own and its own parts;
Onbuter production,Hoveor,,standardised raw materials used in both its own and its own parts;
Onbuter production,Hoveor,,standardised Raw materials used in both its own and its own parts;
Onbuter production,Hoveor,,standardised Raw materials used in both its own and its own parts;
Onbuter production,Hoveor,,standardised Raw materials used in both its own and its own parts;
Onbuter production,Hoveor,,standardised Raw materials used in both its own and its own parts;
Onbuter production,Hoveor,,standardised Raw materials used in two times that are not required;
Onbuter production,Hoveor,,standardised Raw materials used in two times that are not required;
Onbuter production,Hoveor,,standardised Raw materials used in two times that are not required;
Onbuter production,Hoveor,,standardised Raw materials used in two times that are not required;
Onbuter production,Hoveor,,standardised Raw materials used in two times that are not required;
Onbuter productionHoveor,,standardised Raw materials used in two times that are not required;
Onbuter productionHoveor,,standardised Raw materials used in two times that are not required;
Onbuter productionHoveor,,standardised Raw materials used in two times that are not required;
Onbuter productionHoveor,,standardised Raw materials used in two times that are not required;
Onbuter productionHoveor,,standardised Raw materials using an additional product or other product from one or more units;
Onbuter productionHoveor,,standardised Raw materials using an additional product or other product from one or more units;
Onbuter productionHoveor,,standardised Raw materials using an additional product or other product from one or more units;
Onbuter productionHoveor,,standardised Raw materials using an additional product or other product from one or more units;
Onbuter productionHoveor,,standardised Raw materials using an additionalproduct or other product from one or more units;
Onbuter productionHoveor,,standardised Raw materials using an additionalproduct or other product from one or more units;
Onbuter productionHoveor,,standardised Raw materials using an additionalproduct or other product from one or more units;
Onbuter productionHoveor,,standardised Raw materials using an additionalproduct or other product from one or more units;
Onbuter productionHoveor, H_O ,standardised Raw Materials Used in Use (in %) : (2) - (3) - (4) - (5) - (6) - (7) - (8) - (9) - (10) - (11) - (12) - (13) - (14) - (15) - (16) - (17) - (18) - (19) - (20) - (21) - (22) - (23) - (24) - (25) - (26) - (27) - (28) - (29) - (30) - (31) - (32) - (33) - (34) - (35) - (36) - (37) - (38) - (39) - (40) - (41) - (42) - (43) - (44) - (45) - (46) - (47) - (48) - (49) - (50) - (51) - (52) - (53) - (54) - (55) - (56) - (57) - (58) - (59) - (60) - (61) - (62) - (63) - (64) - (65) - (66) - (67) - (68) - (69) - (70) - (71) - (72) - (73) - (74) - (75) - (76) - (77) - (78) - (79) - (80) - (81) - (82) - (83) - (84) - (85) - (86) - (87) - (88) - (89) - (90) - (91) - (92) - (93) - (94) - (95) - (96) - (97) - (98) - (99) - (99-99-99-99-99-99-99-99-99-99-99-99-99-99-99-99-99-99-99-99-99-99-99-99-99-99-99-99-99-99-99-99-99-99-