LAHR2 - épilateur à lumière pulsée RIO - Notice d'utilisation et mode d'emploi gratuit

MODE D'EMPLOI LAHR2 RIO

SALON LASER

HAIR REMOVAL SYSTEM

LAHR2

80.8m

(1) 2017年1月1日

7.1.2.3.4.5.6

The product has been designed with small and features

公司控股股东及公司

PASERS

2、本次发行的种类及数量

A

This product MUST be used responsibly.

Please read these instructions carefully before use.

Refer to your User Manual for

• WARNINGS

• SECURITY BUTTON SEQUENCE

HOW DO LASERS WORKS

• HOW DO LASCHS WORK

- SUITABLE SKIN TYPES

• PATCH TEST

• HAIR GROWTH CYCLE

• WHY IS A SERIES OF TREATMENTS

REQUIRED?

• YOUR QUESTIONS ANSWERED

• TROUBLESHOOTING

1.5(2)中2071

instructions

WARNINGS

• Please retain this instruction leaflet for future reference

- Not suitable for Airo Caribbean or black skin complexions. See "Suitable Sex Types" in User Manual.

- Love hair removal should not cause discomfort. If you feel discomfort or awareness the setting may be too high or your skin tone, it could be not suitable for use with this product.

• If limitation persists, consult a doctor.

• Inbuilt safety features protect the eye being exposed to the however, never am the Wands or near eyes.

• Do NOT use near damnacle materials.

- Keep the product out of reach of chicken and pera

- Reflection Hazard: Please remove all jewelry in the vicinity of the treatment area before use.

• What not in use, store the key responsibility in a sale place away

for children.

• Do not treat the same meal repeatedly in any one session.

- Do not use after owning alcohol or if you are feeling unwell or fatigued.

- Do not treat the following areas: tattoos, permanent make up, pimplex, varas, hair or brack spots or nails, dark cheekies, skin diseases, birth marks, burns, lips, nodule, genital or small areas, eczema, eyelashes, dyscrops, near the eyes, nasal or scar hair.

- The appliance is not intended for use by persons with reduced physics, sensory or mental capabilities, or lack of experience and knowledge unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.

CAUTIONS

• Do NOT dismantle or repair. If you have any problems using the

product, correct our Customer Care Department

• Visits of the unit can cause part

• Do NOT guard do any safety features or open the 197 award.

• Only uses this product with the Mars Ackeler applied

COMPONENTS

Simple line drawing of a rectangular container with a handle and side legs (no text or symbols)

Diagram of a device with labeled parts including gears, switches, and a motor

cre

Is Power Source!

6.1.3.4.5.6.7.8.9.

c. Keys

laser d. Keyswitch

n: Foxner L erad

(5 green lights)

t Erabie Button

ii. Foretle Light irradi

b. Hang held Ward

1 Laser Fuller

1. Loser Group

and Touch Pine

k. Lacer Aporture

[1] "Shita'seresis" and

1. (While 102) Light

2. Price Light

PATCH TEST

IMPORTANT: 24 hours before treatment it is very important to do a patch test.

The cetch test will confirm the maximum power level for your skin type. Each area to be treated must be checked as skin colour can vary:

Please refer to the 'PATCH TEST section in the user manual for instructions.

TREATMENT

• Best results are achieved on hairs that have been shaved a day of two before vegetation or trimmed to 1 mm-2 mm in length.
  • Perceived jewellery in the vicinity of the treatment area
• Please ensure you have patch tested the area to be treated 24 hours prior to treatment.

Plug Mains Adaport into socket on the unit and into the Mairs.

STEP 2

Use the Key to unlock the Kniputon.

The left Power Level light will flash green

STEP 3

Enter "SECURITY KEY PRESS SEQUENCE" within 60 seconds.

You will find the Security Key Press Sequence in the User Manual. Please ensure you read the User Manual before proceeding.

STEP 4

Use + and - buttons to set power level. Refer to User Manual for skin types

If you feel any discomfort reduce the power level.

If the power level is adjusted the red-neck light will flash

STEP 5

Press the Ensbre Button. The red Enacle light will stay on and the amber light on the Wand will illuminate.

STEP 6

When passed on the skirt, she said will go OFF and the white ready to liturcate.

STEP 7

Press and HOLD the Lee Button to start the red treatment. You will hear a series or high pitch helps to in the laser is reacting. The laser appears as a small red light.

This must be aimed at the hair ROOT.

Note: On the lower power levels, the laser will pulse on and off for 4 seconds.

Note: You may feel a pin pick sensation during treatment, however, most people do not feel anything.

Note: Sometimes you can smell faint burning or even see a very small line of smoke on the hair in Montreal.

STEP 8

When the red laser light, treatment ceases the amber light will come back on. You can now move onto the next bar.

Note: The Touch Pins must be removed briefly from the skin between treating each hair.

Note: Successfully treated hands do not always fall out immediately, but are shot over time as they are raised from the hair follicle. Light rubbing can encourage this.

STEP 9

After use, run the Kepatch to lock the job. Remove the key to a sale place children.

Note: If no buttons are pressed after 20 minutes the Unit will enter energy-saving mode. The orange light will flash and power level 1 will remain on. To restart turn key off and back on again and start at Step 8.

If you experience unexpected behavior of the product then it is possible some external electromagnetic interferences is responsible. You should remove this source and restart the product to restore full operation. At no time will be near the current only.

[Non-Text]
[Non-Text]
[Non-Text]
[Non-Text]
[Non-Text]
[Non-Text]
[Non-Text]
[Non-Text]
[Non-Text]
[Non-Text]
[Non-Text]
[Non-Text]