TIMM - R100 - Termostat Vemer - Besplatni korisnički priručnik

KORISNIČKI PRIRUČNIK TIMM - R100 Vemer

HONTO-218

Voter S.p.A. 1-2010 - 4th (18) • 7th Camp (inc. 16 e-mail: info@cnepd - www.nacn

User Manual

ADJUSTABLE THERMOSTAT - IMMERSION - WITH SHANK Read all the instructions carefully

■ TINW - R100 and TINW - R200 are based on prior thermotrate, liquid exposure, with varying concentrations. Completes with core histid levels for a biomarker regulation on oxalers, pumps and other mixing equipment.

The thermode ray: flucturing is ^1 Infrared light

SAFETY WARNINGS

CHECK THAT THE POWER IS DISCONNECTED on the USER BENE CONTROLLED before connecting the thermostat. Check that the power input is compatible with the output on the contacts (see the technical detail).

表决权

Model Description

VE305900 TINN - NICC

集美的（2016）第57-100页

VEGETED TIME RATE Maturity: 20%

Dimensions

TECHNICAL DATA

• Salting temp: -31 = +90°C + 25°C
• Monde 40.26
  • Days of production: 140
  • Thermal effect
  • "Компия телк митергите: АГС"
  • Weinntachlurgesing 1100
  • Aktionisch passare: 10 bis
  • Central vehicles: 16 A (5) 250 lbs
• Actisate: IB
• Core high: M2U

INSTALLATION

- ATTENTION only specialized observations or authorized indicators must carry out the instructions given in his leaflet. In full observance of the safety instructions and current applicable legislation.

2. 本说明仅供参考。

A. I seem the same to present the new home in restaurant.

B. Re the top in the corner housing 15" threshold

C. Replace the hole on the thermometer inside the heat and height down the flying screen.

D. Slide off the back and above the two screws be reached to open the them or at over.

E. Pass the test through the core field and make the connections following the diagram below.

Terminal 1 = common Terminal 2 = opens the circuit when the set temperature is reached Terminal 3 = does the circuit when the set temperature is reached

B. Replace the cover, screws and knob.

REFERENCE STANDARDS

Conformity to the BI directive 2014/35/UE (LVD) and 2014/30/UE (ENDC) is certified in reference to the harmonized standards: LN 60730-1, LN 60730-2-9

User Manual

ADJUSTABLE THERMOSTAT - WITH EXTERNAL CAPILLARY

Read all the instructions carefully

■ TMT-R gas is a best computer thermols, lipid exposure, and switching contacts, complete with one white liquid for automatic regulation techniques, pumps and other binding equipment. The thermolol can be found on any surface using the performed line.

SAFETY WARNINGS

CHECK THAT THE POWER IS DISCONNECTED ON THE USER BEING CONTROLLED before connecting the thermostal. Check that the power input is compatible with the output on the contacts (see the technical data).

Body

Model

[Non-Text]

At the time of 30°C, the end of the

Dimensions

TECHNICAL DATA

• Soliv: now, -20 = +60°C + 15°C
• Diflunstel ^ C + 2 ^ C
  • Degree of protection. IP 40
  • Inclusion: 1
  • Пеатролет «СИИ»
  • 100000000000000000000000000000000000000
  • Charpe-raminals
  • Corbin's study 164 pm 250 Vea
  • A## 5 • C###

INSTALLATION

- ATTEMOT 014, one special and electronic or subrational needs used carried out the instructions given in this chapter, in full observance of the safety instructions and current applicable legislation.

CONNECTIONS

A. In any surface using the peritoneal line

II. Intrams the bulk of the end of the capillary in the liquid (or place it closely reaching the surface) that the

Temperian has to be regular for.

1. Close on the ramp and cut down the two screws of reach to open the thermocrit cover.
2. Pass the leads through the core length and make the connections linking to the diagram below.

E. Rainer the year, some and kind

REFERENCE STANDARDS

Country to the Ill division 2014/35/E (197) and 2014/36/E (FMCC) is ordered in millions to the non-bond bonds P26070-1, P48070-2-9

User Manual

RESETTABLE THERMOSTAT - IMMERSION - WITH SHANK

Read all the instructions carefully

■ RPN - 100 a heat in polar thermal, fluid separation across all cold temperatures solely reduced with increased heat and cooling accuracy. The temperature is low (a 5°C) heated by

SAFETY WARNINGS

CHECK THAT THE POWER IS DISCONNECTED ON the USER BEING CONTROLLED before connecting the thermologist. Check that the power input is compatible with the output on the contacts (see the technical data).

•

Node

lesziasin

Reversible from research of the

Dimensions

TECHNICAL DATA

• Linear wavefunction, 98°C to 45°
- Good enough and positive safety
• Degree of protection P 40
• Inclusion chez:
• Intercultural information
• Maximum bulb temperature: 130°C
• Neuroblast pressure: 10 Hz
- Normally closed contact
• Caractarpers. 15 A (2) 250 Vcs
• Action type: TE

INSTALLATION

• ATTLENTIC: only specialized electricians or authorised installers must carry out the instructions given in this leaflet. In full observance of the safety instructions and current applicable legislation.

CONNECTIONS

A. Lesse le snow to repure le lap from the Lebanon.

B. For the top in the corner housing (15" Bending. C. Prices like a bit on the front panel inside the main consideration down the face survey

1. Replace the step on the thermoidal mode the step and sign down the long screw.
2. Discreve the protection bond of the parallel push button and the below die in open the thermoidal

CAE

E. Pass the leads through the core touch and make the connections showing the diagram below.

Terminal 1 = common

Terminal 2 = opens th

set temperature is reached

(99°C ±4°C)

E. He are the cover, nut and gas.

RESET OPERATION

In several directions of the road, thermocenter (papar industry), and until the system temperature falls within the normal fields. Towards the cause that it is the practical equal of the system. Then process to normally need the thermometer by removing the plastic cap and pushing the button inside the net with a special tool. Finally, across the cap onto the nut.

REFERENCE STANDARDS

Conformity in the RJ direct line 2014-3551E (Mth and 2014-0824-E (PNC)) is declared in reference to the harmonious standards: EN 60730-1, EN 60730-2-0

User Manual

DOUBLE RESETTABLE AND ADJUSTABLE THERMOSTAT - IMMERSION - WITH SHANK

Read all the instructions carefully

- TWA-R2 is a local body or polar thermal, liquid equation, with modeling to test, complete with core thickness. Temperature parameter and safety control with normal soil and power security. The thermal is fixed using a 57 threshold loop.

SAFETY WARNINGS

CHECK THAT THE POWER IS DISCONNECTED ON THE USER BENG CONTROLLED before suspecting the thermostat. Check that the power input is compatible with the output or the contacts (see the technical data).

Cride

Nodal

VEGETOO

Description

VEGETOO

加发来FETA

Dimensions

TECHNICAL DATA

• Regular temperature setting range: 130 : 492°C (= 3°C)
- 1989:4°C=2°C
• Unferr pro-acid temperature; +50°C in 10%
• Degree of protection. (P40)
+ resubtion class 1
• Thema graderl: «Umin
• Azium rea. Imperiae: 30°C • Azium tubilumaceae: 110°C
• 'Aetrum sheath pressure. 10 bar
+ Normally closed or change over contacts
• Contact outputs. 16 A (5) 290 Vcc
• Actor spec. 10

INSTALLATION

- ATTENTION, on a special and electricians or authorised installers must carry out the instructions given in the leader, in full observance of the safe instruments and current applicable legislation.

COMNECTIONS

A. Conson he saw a move to the top him be induced

1. Echal impor to remag bursing (5° Tradig)

C. Replace the table on the double horizontal side of the tap and light down the tap screw. D. Measure hula under hemocle, vence in jaw and rail, up from, up mounture ingestedi

Dr. 10 access to the inner stainless steel, remove the core and disc. A sample with regulator the mouse remove the knob and take the airway. Then remove the double plastic liner.

1. Pass the work through the care clinics. The instrument is designed to work on two independent emails, one with the regulator and another with the binding or a single circuit with the regulator and/or connected as shown in the following diagram

E. Replace the cover, screen and arch out and can

LIMITER

Terminal 1 = common

Terminal 2 = open the circuit when the set

temperature is reached 199°C ±4°C

REGULATOR

Terminal 1 = common

Terminal 2 = opens the circuit when the

set temperature is reached

Terminal 3 = closes the circuit when the

set temperature is reached

RESET OPERATION

In case of activation of the reset thermometer open contact, will until the system temperature falls within the normal limits. Remove the causes that led to the working of the system. Then proceed to manually reset the thermostat by removing the plastic cap and pushing the button inside the nut with a special load.

REFERENCE STANDARDS

Copyright to the Bld series 2014/25/E LCO and 2014/30/IE ENDE

Is declared in reference to the harmonised standards. EN 00730-1, EN 00730-2-9

information to assess pursued to art. 14 of the directive 2012/10 / EU of the europaeum parliament and of the council of 4 July 2012 on works electrical and electronic equipment (WEE)

If the unsool-dut bin symbol assesses on the equipment or packaging, this means the product must not be included with other general waste at its end of its working life. The use must take the waste product in a neutral waste centre, or which it is retail for purchasing a new item.

Products for disposal can be consigned free of change (without any new purchase obligation to retailers with a sales area of at least 400 m2. If they measure less than 25 cm, an efficient coated waste collection for the environmentally friendly disposal of the used device

of the subsequent reporting, these are the past 10 years having been estimated from the financial institutions, and 2015 is a result, and otherwise the results are not reflecting on the outstanding status.