CSK100 - Zvučnik Audac - Besplatni korisnički priručnik

KORISNIČKI PRIRUČNIK CSK100 Audac

INSTALLATION MANUAL

CSK100 PENDANT CEILING SUSPENSION KIT FOR NELO SERIES

STEP 1 STEP 2

graph TD
    A["Top Node"] --> B["Branch 1"]
    A --> C["Branch 2"]
    A --> D["Branch 3"]
    B --> E["Lower Node 1"]
    B --> F["Lower Node 2"]
    B --> G["Lower Node 3"]
    C --> H["Lower Node 4"]
    C --> I["Lower Node 5"]

The CSK100 ceiling suspension kit shall be assembled as shown in the above explode drawing. It consists of a ceiling plate through which the main suspension wire is fed and suspending.

Additionally, the threaded parts shall be inserted and tightened to the matching counterparts.

Assemble the ceiling plate to the provided location where the speaker should be suspended from. This is done by fastening the base plate by three screws to the mounting surface.

Choose the fasteners depending on the mounting surface (concrete, wooden, steel, ...) to guarantee a safe and secure mounting.

STEP 3 STEP 4

Technical line drawing of a mechanical lifting or lifting device with no visible text or symbols

Assemble the suspension kit to the speaker through inserting the bolts of the triangular steel wire construction into the threaded bushings on the rear side of the loudspeaker.

Pure diagram of a tripod structure with no text, numbers, or symbols

Insert the steel wire suspending from the ceiling through the connecting joint part, and pull it through until the desired height is reached. When released the speaker is instantly anchored. Verify whether the speaker is safely suspended and anchored by gently pulling it. For releasing or bringing the speaker height down, press and hold the surrounding part at the cable entry to release it.

For connecting the speaker, run the speaker connection cable besides the steel suspension wire, and provide the connection cable through the designated openings (grommets) for connecting the speaker accordingly.

Refer to the instruction manual of the NELO series speakers for further instructions how the speaker shall be connected.

INSTALLATION MANUAL

CSK100 PENDANT CEILING SUSPENSION KIT FOR NELO SERIES

PRECAUTIONS

• ALWAYS KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE. NEVER THROW THEM AWAY
• ALWAYS HANDLE THIS UNIT WITH CARE
- CLEAN ONLY WITH DRY CLOTH
• HEED ALL WARNINGS AND FOLLOW ALL INSTRUCTIONS
• NEVER EXPOSE THIS EQUIPMENT TO RAIN, MOISTURE, ANY DRIPPING OR SPLASHING LIQUID.
• DO NOT INSTALL THIS UNIT NEAR ANY HEAT SOURCES SUCH AS RADIATORS OR OTHER APPAR ATUS THAT PRODUCE HEAT
• DO NOT PLACE THIS UNIT IN ENVIRONMENTS WITH A HIGH LEVEL OF DUST, HEAT, MOISTURE OR VIBRATION
- THIS UNIT IS DEVELOPED FOR INDOOR USE ONLY. DO NOT USE IT OUTDOORS
• ONLY USE ATTACHMENTS & ACCESSORIES SPECIFIED BY THE MANUFACTURER.
- ONLY INSTALL THE SPEAKER IN LOCATIONS THAT CAN STRUCTURALLY SUPPORT THE WEIGHT OF THE SPEAKER. IGNORING THIS CAN BRING THE SPEAKER DOWN.
• DO NOT USE ANY OTHER METHOD THAN SPECIFIED TO MOUNT THE SPEAKER. IF EXTREME FORCE IS APPLIED TO THE SPEAKER, IT COULD FALL DOWN
• ATTACH A SAFETY WIRE TO THE SPEAKER WHEN IT IS MOUNTED HIGH UP. ONLY USE INDUSTRY-ACCEPTED RIGGING TOOLS AND METHODS
- CAREFULLY CHECK THE UNIT'S CONDITION AFTER UNPACKING.

CAUTION - SERVICING

This product contains no user serviceable parts. Refer all servicing to qualified service personnel. Do not perform any servicing (unless you are qualified to do so.)

EC DECLARATION OF CONFORMITY

This product conforms to all the essential requirements and further relevant specifications described in following directives: 2014/30/EU (EMC) and 2014/35/EU (LVD)

• IF THERE IS ANY DAMAGE TO THE CARTON BOX OR THE UNIT ITSELF, INFORM YOUR VENDOR IMMEDIATELY.
• ALWAYS FOLLOW THE LOCAL REGULATIONS AND REQUIREMENTS REGARDING INSTALLATION, SUSPENSION AND CONNECTION OF THIS LOUDSPEAKER. EVEN WHEN OTHERWISE SPECIFIED IN THIS DOCUMENT.
• THE INSTALLATION OF THIS LOUDSPEAKER SHALL BE DONE BY QUALIFIED PERSONNEL ONLY.
  • USE CABLES OF THE RIGHT GAUGE TO CONNECT THE LOUDSPEAKER
  • USE CABLES WITH CLEAR COLOR CODING INDICATING THE POLARITY AND MAINTAIN THE SAME POLARITY THROUGHOUT THE WHOLE SYSTEM.
  • ONLY USE THE CORRECT AMPLIFIER OUTPUT VOLTAGE AND IMPEDANCE. EXCEEDING THESE LIMITS COULD CAUSE FIRE OR OTHER FAILURES.
  • AVOID EXPLOSIONS: DO NOT USE THE SPEAKER AROUND GASOLINE, THINNER OR OTHER COMBUSTIBLES
  • AVOID ELECTRIC SHOCKS: SWITCH OFF THE AMPLIFIER WHEN CONNECTING THE LOUDSPEAKER
  • DO NOT USE THE LOUDSPEAKER FOR AN EXTENDED PERIOD OF TIME AT DISTORTED SOUND. THIS COULD CAUSE PERMANENT DAMAGE.

WASTE OF ELECTRICAL AND ELECTRONIC EQUIPMENT (WEEE)

The WEEE marking indicates that this product should not be disposed with regular household waste at the end of its product life. This regulation is created to protect both the environment and human health.

This product is developed and manufactured with high quality materials and components which can be recycled and/or reused. Please dispose of this product at your local collection point or recycling center for electrical and electronic waste. Do this to make sure that the product is recycled in an environmental friendly way, and help to protect the environment in which we all live.