Centon

SI1 - SSD Centon - Besplatni korisnički priručnik

Pronađite besplatno priručnik za uređaj SI1 Centon u PDF formatu.

📄 1 stranica Hrvatski HR ⬇ Preuzmi 💬 AI pitanje
Notice Centon SI1 - page 1
1 / 1
Pick your language and provide your email: we'll send you a specifically translated version.

Pitanja korisnika o SI1 Centon

0 pitanje o ovom uređaju. Odgovorite na one koje znate ili postavite svoje.

Postavi novo pitanje o ovom uređaju

E-mail ostaje privat: koristi se samo za obavještavanje ako netko odgovori na vaše pitanje.

Još nema pitanja. Budite prvi koji pita.

Preuzmite upute za vaš SSD u PDF formatu besplatno! Pronađite svoj priručnik SI1 - Centon i uzmite svoju elektroničku napravu natrag u ruke. Na ovoj stranici objavljeni su svi dokumenti potrebni za korištenje vaše naprave. SI1 marke Centon.

KORISNIČKI PRIRUČNIK SI1 Centon

SSD Installation Guides

Installation for Desktops and Servers:

  1. Power down the PC.
  2. Remove the computer case cover.
  3. Install the SSD drive in an open hard drive bay. Refer to system documentation for hard drive installation instructions. (adaptor sold separately)
  4. Connect the SATA cable to the Centon SSD and an available SATA connector on the motherboard.
  5. Plug the SATA power connector from the power supply to the SSD.
  6. Close the computer case cover.
  7. Reconnect power cord and power on the PC.
  8. Please enter BIOS and ensure that the SSD drive is being recognized in the BIOS.

Installation for Notebooks:

  1. Power down the Notebook.
  2. Remove the notebook battery power and power cable.
  3. Unscrew and remove the notebooks cover.
  4. Remove the hard drive from the bay.
  5. If there is a connector or spacer bracket connected to the hard drive; remove it.
  6. Attach the connector or spacer bracket to the SSD hard drive.
  7. Align the pins of the SSD to the drive bay. Slide firmly into the hard drive bay.
  8. Reattach the panel and the screw.
  9. Reinstall the battery and the power cable.
  10. Power on your notebook.
  11. Please enter BIOS and ensure that the SSD drive is being recognized in the BIOS.

USB installation:

  1. Connect USB cable to the SSD drive and connect to the USB port on the computer.
  2. Before disconnecting from USB port on PCs please click the safely remove icon. On Macs please drag USB icon to trash.
Asistent za priručnik
Pokreće Anthropic
Čekanje na vašu poruku
Informacije o proizvodu

Marka : Centon

Model : SI1

Kategorija : SSD