Question 1

How to activate and adjust the swing mode on the ALESIS SR18 electronic drum kit?

Accepted Answer

The swing mode on the ALESIS SR18 adds a rhythmic offset effect to make grooves more natural and dynamic. Here’s how to activate and adjust this mode:

Steps to activate the swing mode on the ALESIS SR18

Power on the device: Make sure your SR18 is turned on.
Access edit mode: Press the EDIT button to enter programming mode.
Select the swing parameter: Use the navigation buttons to scroll through the options until you find SWING or SWING AMOUNT.
Adjust the swing level: Change the value using the adjustment buttons to set the intensity of the swing to your preference. A higher value accentuates the rhythmic offset.
Save the settings: If necessary, confirm and save your changes to keep them.
Test the result: Play a rhythm to hear the effect of the applied swing.

The swing mode is a powerful tool for customizing your patterns and adding groove to your compositions. Feel free to experiment with different levels to find the one that best suits your musical style.

Question 2

How to adjust the pitch on the ALESIS SR18 electronic drum kit?

Accepted Answer

On the ALESIS SR18 electronic drum kit, adjusting the pitch of each sound is done directly through the Drum Set menu. This allows you to modify the tone of each pad to suit your musical style or mix.

Here is the complete procedure to adjust the tuning of a sound:

Access the Drum Set menu: Press the DRUM SET button to open the configuration options for the drum sound set.
Select a set: Use the INC/DEC buttons, the VALUE knob, or the numbered buttons to select the set (00 to 99) containing the sounds to modify.
Hit the pad to modify: Hit the pad whose pitch you want to adjust (for example, the snare or bass drum pad).
Access the parameter pages: Press the PAGE UP button to view other adjustment pages. The tuning is among the available parameters (along with volume and pan).
Adjust the tuning: Use the INC/DEC buttons, the VALUE knob, or the numbered buttons to increase or decrease the pitch of the selected pad.
Check the result: Hit the pad to listen to the new pitch and continue adjusting until you achieve the desired tone.
Modify other pads: To adjust other pads, simply hit another pad and repeat the adjustment process.
Save the set: Once satisfied with the changes, press and hold the SAVE button. Use the INC/DEC buttons or the VALUE knob to select a destination location, then press REC to save the modified set. Then exit the Drum Set menu by pressing DRUM SET.

Important: if you modify a Preset set, only copying that set as a user set (USER) will allow you to save it. Factory sets (Preset) cannot be directly overwritten. Also note that drum and percussion sounds are grouped together, so modifying the drum sounds of a set will also affect the associated percussion sounds, unless individual pads are replaced.

User manual ALESIS Electronic battery case : user manuals and guides in PDF

Models ALESIS Electronic battery case most viewed

Other categories ALESIS

Recent questions about Electronic battery case ALESIS