How do I set the temperature on the V-ZUG Winecooler SL?

Q: How do I set the temperature on the V-ZUG Winecooler SL?

The V-ZUG Winecooler SL has two independent temperature zones , each adjustable from 5 to 18 °C. This setup allows you to simultaneously store white and red wines at their respective optimal temperatures. Turning on the device: Press the "1" button (On/Off) for at least 3 seconds to start the cooler. Setting the temperature of the upper zone (white wines): Press and hold the "2" button for 3 seconds. The display will start blinking. You can then adjust the temperature in steps using the same button. The recommended range is 5 to 12 °C , ideal for white wines, champagnes, sparkling wines, and rosés. Setting the temperature of the lower zone (red wines): Press and hold the "2a" button for 3 seconds. The display blinks. Adjust the temperature in steps. The recommended range is 12 to 18 °C , ideal for red wines. Important: the temperature set in the lower zone must always be the same as or higher than that of the upper zone . Configuration examples: To store both white and red wine together, set the upper zone to 10 °C (white wine) and the lower zone to 16 °C (red wine). For champagnes and light reds, use 8 °C on top and 14 °C below. Supercool function (rapid cooling): Press and hold the "3" button for 3 seconds. The yellow indicator light will turn on. The device cools the upper zone to 5 °C for 24 hours, then automatically returns to the temperature you had set. Useful for quickly preparing champagne or chilled white wine. Let the device run for a few hours after setting to stabilize the temperature. The digital displays will allow you to check that both zones reach the desired temperatures.

Question

Accepted Answer

The V-ZUG Winecooler SL has two independent temperature zones, each adjustable from 5 to 18 °C. This setup allows you to simultaneously store white and red wines at their respective optimal temperatures.

Turning on the device: Press the "1" button (On/Off) for at least 3 seconds to start the cooler.

Setting the temperature of the upper zone (white wines): Press and hold the "2" button for 3 seconds. The display will start blinking. You can then adjust the temperature in steps using the same button. The recommended range is 5 to 12 °C, ideal for white wines, champagnes, sparkling wines, and rosés.

Setting the temperature of the lower zone (red wines): Press and hold the "2a" button for 3 seconds. The display blinks. Adjust the temperature in steps. The recommended range is 12 to 18 °C, ideal for red wines. Important: the temperature set in the lower zone must always be the same as or higher than that of the upper zone.

Configuration examples: To store both white and red wine together, set the upper zone to 10 °C (white wine) and the lower zone to 16 °C (red wine). For champagnes and light reds, use 8 °C on top and 14 °C below.

Supercool function (rapid cooling): Press and hold the "3" button for 3 seconds. The yellow indicator light will turn on. The device cools the upper zone to 5 °C for 24 hours, then automatically returns to the temperature you had set. Useful for quickly preparing champagne or chilled white wine.

Let the device run for a few hours after setting to stabilize the temperature. The digital displays will allow you to check that both zones reach the desired temperatures.

User manual V-ZUG Wine cellar : user manuals and guides in PDF

Models V-ZUG Wine cellar most viewed

Other categories V-ZUG

Recent questions about Wine cellar V-ZUG