How to set and synchronize the displayed time on the Pelgrim IK3062 cooker?

Question

Accepted Answer

The Pelgrim IK3062 is an induction cooktop and does not have a clock function to display the current time. The display of this cooktop is reserved for showing the power level, safety symbols (pot detection, hot zone), and the cooking timer.

This induction cooktop therefore does not have a time setting or clock to synchronize. There is no "Clock" or "Time" button on the control panel.

What you can adjust on the Pelgrim IK3062:

The cooking power: 10 levels (0-9) plus the Boost mode, adjustable by touching and sliding the slider of each cooking zone.
The cooking timer: you can set an automatic shut-off time for an active zone. To do this, press the “+” or “-” buttons of the timer to increase or decrease the duration (in increments of 1 minute or in increments of 10 minutes if you hold the button down).

If you are looking to set a shut-off delay for your cooking, use the integrated timer instead: it will automatically stop the cooking zone after the set time, providing practical safety during your preparations.

For more details on using the timer or cooking power, refer to the complete user manual of the Pelgrim IK3062.

User manual Pelgrim Cooker : user manuals and guides in PDF

Models Pelgrim Cooker most viewed

Other categories Pelgrim

Recent questions about Cooker Pelgrim