Question 1

How can I tell if the motor brushes of my Miele T650C tumble dryer are worn out and how to replace them?

Accepted Answer

The motor brushes of your Miele T650C tumble dryer are essential parts that allow the motor to function properly. Their wear can lead to malfunctions, such as a motor that does not start or stops abruptly.

How to detect brush wear?

The tumble dryer does not start or stops frequently.
You hear unusual noises or sparks inside the motor.
Visual inspection: when opening the motor, the brushes appear very short or broken.

How to replace the brushes?

Unplug the appliance to avoid any risk of electric shock.
Access the motor by removing the back or side panel depending on the model.
Locate the brushes, usually secured by a spring in their holder.
Remove the worn brushes by releasing the springs and gently pulling them out.
Install the new brushes compatible with the T650C model.
Reassemble the tumble dryer and test its operation.

Important tips

Only use original or compatible brushes recommended for the Miele T650C model.
If you are not comfortable with this operation, call a qualified technician to ensure the safety and proper repair of your appliance.
Take the opportunity to check the overall condition of the motor and other components during disassembly.

Question 2

Why do the indicators on my Miele T650C tumble dryer light up and then turn off immediately when starting?

Accepted Answer

When the indicators on your Miele T650C tumble dryer light up and then turn off immediately after being turned on, it may indicate a problem related to the power supply, safety, or an internal malfunction. Here are the main possible causes and steps to follow to try to resolve this issue:

1. Checking the power supply

Make sure the tumble dryer is properly plugged into a functioning outlet.
Test the electrical outlet with another device to confirm that it is providing power.
Check the circuit breaker or fuse in your electrical installation to ensure they are not tripped or blown.

2. Checking the door

Ensure that the door of the tumble dryer is properly closed. A poor lock prevents the device from starting.
Clean the contacts or locking mechanism if necessary to ensure a good connection.

3. Resetting the device

Unplug the tumble dryer for at least 5 minutes to reset the internal electronics.
Then plug it back in and try to turn it on again.

4. Overheating or thermal protection

If the device has been used recently, it may be in thermal protection mode. Allow it to cool down for about an hour before trying again.

5. Internal technical issues

If none of the previous steps resolve the issue, it may be an electronic fault, a control board problem, or another internal component issue.
In this case, it is recommended to contact a qualified professional for appropriate diagnosis and repair.

By following these tips, you will be able to identify the most likely cause of the malfunction and take appropriate action to restore the proper functioning of your Miele T650C tumble dryer.

User manual MIELE Tumble dryer : user manuals and guides in PDF

Models MIELE Tumble dryer most viewed

Other categories MIELE

Recent questions about Tumble dryer MIELE