What type of coolant should be used for an Alfa Romeo Brera?

Question

Accepted Answer

For your Alfa Romeo Brera, you must use an ethylene glycol-based coolant that complies with the Fiat 9.55523 standard, which ensures optimal protection against corrosion, freezing, and the formation of limescale deposits. This coolant regulates the engine temperature, maintaining it around 100°C, which is essential for all available engines: 3.2 JTS V6, 2.2 JTS, and 2.4 JTDM.

Recommended coolant characteristics:

Color: red or pink (standard dyes for Alfa Romeo)
Base: pure ethylene glycol, without silicon dioxide
Accepted technical standards: ASTM D3306, ASTM D1384, SAE J1034, BS 6580-20, NF R 15601 type 1, or VAG TL-774 (D or F)
System capacity: approximately 7.35 liters for 2.4 JTDM engines and 8 to 9 liters for V6

Maintenance and replacement: Completely replace the coolant every 30,000 km or every 24 months, whichever comes first. A complete drain of the cooling circuit is recommended every 2 to 4 years to eliminate wear residues. Between replacements, regularly check the level in the expansion tank when the engine is cold and top up if necessary.

Essential warnings: Never mix different types or brands of coolants, as this can cause undesirable chemical reactions and may damage the cooling system. Always prefer a recognized brand coolant certified by Alfa Romeo or Fiat. In case of a leak or abnormal drop in level, consult an authorized garage promptly to avoid engine overheating.

User manual ALFA ROMEO Coupe : user manuals and guides in PDF

Models ALFA ROMEO Coupe most viewed

Other categories ALFA ROMEO

Recent questions about Coupe ALFA ROMEO