What to do if water is leaking inside or outside the Junker JC15KAFF0 refrigerator?

Question

Accepted Answer

If water is leaking inside or outside your Junker JC15KAFF0 refrigerator, the main cause is usually a blockage in the drainage system. Under normal operation, your appliance generates condensation and frost on the back wall that should drain properly into the evaporation tray located at the back bottom of the refrigerator.

Most common cause: blockage of the drainage system

The defrost water channel and the drainage hole of your Junker JC15KAFF0 may be blocked by food residues, frost, or limescale deposits. This is the most common reason for water leaks. To remedy this issue:

Turn off the appliance and unplug it from the power supply.
Remove the drawer tray located at the base of the refrigeration compartment to access the channel and the drainage hole.
Carefully clean the defrost water channel and the drainage hole using a damp cotton swab or a small flexible tool. Make sure to completely clear any residue.
Replace the drawer tray, plug the appliance back in, and restart it.

Other possible causes

If water continues to leak after cleaning the drainage, check that the refrigerator is properly leveled. A misaligned appliance prevents water from draining correctly. Use a level to check for horizontal alignment. Also, inspect the door seals, as damaged or misaligned seals can allow warm air to enter, causing excessive condensation.

Prevention

Regularly clean the defrost water channel and the drainage hole of your Junker JC15KAFF0 to prevent residue buildup and odors. Regular maintenance ensures the proper functioning of the drainage system and prevents leak issues. If the problem persists after these checks, contact Junker customer service, as this may indicate a more significant technical issue.

User manual Junker Fridge : user manuals and guides in PDF

Models Junker Fridge most viewed

Other categories Junker

Recent questions about Fridge Junker