Does changing the soap nozzle stop the soap flow?

Q: Does changing the soap nozzle stop the soap flow?

Yes, absolutely. The soap system of the WESTINGHOUSE WPX2700e only works with the specialized low-pressure soap nozzle . As soon as you switch to another nozzle (0°, 15°, 25° or turbo), you lose the soap application system. Why? The soap nozzle is designed to operate at low pressure and draw detergent from the built-in tank. The other nozzles (high pressure and rotary) are not connected to the soap system and cannot deliver it. To use soap again: Stop the cleaner and turn off the water Release the pressure by pulling the trigger Remove the current nozzle by pulling the collar back Reinstall the soap nozzle until it clicks into place Fill the soap tank with a properly formulated detergent/water ratio The maximum flow rate with the soap nozzle is 1.76 US GPM (6.7 L/min).

Question

Accepted Answer

Yes, absolutely. The soap system of the WESTINGHOUSE WPX2700e only works with the specialized low-pressure soap nozzle. As soon as you switch to another nozzle (0°, 15°, 25° or turbo), you lose the soap application system.

Why? The soap nozzle is designed to operate at low pressure and draw detergent from the built-in tank. The other nozzles (high pressure and rotary) are not connected to the soap system and cannot deliver it.

To use soap again:

Stop the cleaner and turn off the water
Release the pressure by pulling the trigger
Remove the current nozzle by pulling the collar back
Reinstall the soap nozzle until it clicks into place
Fill the soap tank with a properly formulated detergent/water ratio

The maximum flow rate with the soap nozzle is 1.76 US GPM (6.7 L/min).

User manual WESTINGHOUSE Pressure washer : user manuals and guides in PDF

Models WESTINGHOUSE Pressure washer most viewed

Other categories WESTINGHOUSE

Recent questions about Pressure washer WESTINGHOUSE