Question 1

How do I remove the handlebars from the KETTLER ERGOMETER MX1?

Accepted Answer

To remove the handlebars from your KETTLER ERGOMETER MX1, follow these simple steps:

Steps to Remove the Handlebars

Preparation: Ensure that the device is turned off and unplugged to avoid any electrical or injury risks.
Locate the fasteners: Look under the handlebars to identify the screws or bolts that hold it in place. On this model, these are usually hexagonal or Phillips head screws.
Necessary tools: Equip yourself with an Allen key or a screwdriver suitable for the screw heads.
Unscrew the fasteners: Carefully unscrew all the screws that hold the handlebars. Keep them in a safe place for reassembly.
Detach the handlebars: Once the screws are removed, gently pull the handlebars upwards to separate them from the support. Do not force it to avoid damaging the parts.
Disconnect the cables: If your handlebars are equipped with sensors (such as a heart rate sensor), gently disconnect the cables before completely removing the handlebars.

By following these steps, you will be able to safely and easily remove the handlebars from your ergometer.

Question 2

How do I disassemble the KETTLER ERGOMETER MX1 for easy transport?

Accepted Answer

To disassemble your KETTLER ERGOMETER MX1 (reference 07989-800) for transport, follow these practical steps. This device measures 105 x 53 x 140 cm and weighs approximately 30-40 kg, so it is important to prepare it well before transport.

Preparation and safety: Start by completely unplugging the device from the electrical outlet. This eliminates any risk of electrical accident during disassembly. Then remove all removable accessories attached to the device, including the bottle holder if present.

Disconnecting the sensors: Carefully disconnect the cables from the heart rate sensors (clip-on earphone and wireless Puls Set kit). These connectors are fragile, never force the disconnection to avoid damaging the contacts.

Disassembling the handlebars: The handlebars are held by screws that can be tightened with an Allen key or a screwdriver depending on the type of fastening. Unscrew the entire handlebars and set the screws aside in a small bag to avoid losing them. Once removed, the handlebars significantly reduce the overall height of the device.

Removing the seat: Locate the fixing screw of the seat post and loosen it. The seat and its post can then be completely removed. This step greatly facilitates the packing and storage of the fitness bike during transport.

Feet and stabilizers: Check if the front or rear feet of your model can be folded or removed. Some KETTLER models have foldable feet that reduce bulk. If so, fold them inward. If the feet are removable, take them off and place them with the other spare parts.

Packing the parts: Place all disassembled parts (handlebars, seat, screws, cables) in a sturdy bag or suitable box. Ensure that each item is well protected to avoid scratches or damage during transport. You can use bubble wrap or cloth to wrap the most sensitive parts.

Important: Never force during disassembly. If a part resists, check that you are loosening the correct screw or fastening element. Never modify the device beyond what is described here; only qualified KETTLER personnel are authorized to make more significant modifications.

User manual KETTLER Ergometer : user manuals and guides in PDF

Models KETTLER Ergometer most viewed

Other categories KETTLER

Recent questions about Ergometer KETTLER