Why does the battery of my ROXProX 1 not last long after charging?

Question

Accepted Answer

Checks to Perform

If your ROXProX 1 discharges quickly after charging, first check the following points:

Charge Indicator: At the end of charging, the light should turn green (battery full). If the light remains yellow or red, it means the charge is not complete - let it charge until you get the green light.
Charging Duration: Do not charge for more than 5 hours. Overcharging can damage the battery. The charging cycle should last between 3 and 5 hours.
Charging Temperature: You should only charge between 0°C and 30°C. If the temperature is too low or too high, it reduces the battery life and may prevent proper charging.
Open Cover: Ensure that the cover remains open during the entire charging process.
Humidity Condition: Never charge the ROXProX 1 if it is wet or damp.

For your information, your ROXProX 1 should provide about 10 hours of continuous use under normal conditions.

If after these checks the battery lasts less than 2-3 hours, this may indicate battery wear. In this case, contact A-Champs support for troubleshooting or replacement.

User manual A-Champs Home theater audio system : user manuals and guides in PDF

Models A-Champs Home theater audio system most viewed

Other categories A-Champs

Recent questions about Home theater audio system A-Champs