Why are the bass of my B&W 801D speakers not working properly?

Question

Accepted Answer

Several causes may explain why the bass of your B&W 801D speakers are not working properly. Here are the main points to check:

1. Checking the connections

Make sure that the cables connecting your speakers to the amplifier are properly connected, without any loose contacts or polarity inversion. A poorly connected or damaged cable can lead to a loss of low frequencies.

2. Amplifier settings

Check the settings of your amplifier, especially the bass settings and any filters. A setting that is too low or an activated high-pass filter can cut off the bass.

3. Speaker positioning

The placement of the speakers in the room influences the reproduction of bass. Avoid placing them too close to walls or in a corner, as this can alter the low-frequency response. Try to move them slightly away from reflective surfaces.

4. Technical condition of the speakers

A hardware issue, such as a damaged bass speaker, can also be the cause. If possible, test the speakers on another audio system to see if the problem persists.

5. Other checks

Check that the internal fuses are not blown.
Ensure that the speakers are powered correctly, if they require external power.

By following these steps, you should be able to identify the cause of the bass malfunction on your B&W 801D and remedy it.

User manual B&W Speakers : user manuals and guides in PDF

Models B&W Speakers most viewed

Other categories B&W

Recent questions about Speakers B&W