How do I adjust the rinse aid dosage on the ARTHUR MARTIN ASL5368LA dishwasher?

Question

Accepted Answer

The rinse aid allows your dishes to dry without streaks or spots. To adjust the dosage on your ARTHUR MARTIN ASL5368LA dishwasher, you need to adjust the amount release selector (B) located inside the rinse aid dispenser, positioned on the door of the appliance.

To access the selector, start by pressing the open button (D) to open the cover (C) of the dispenser. You can then turn the selector (B) between position 1 (minimum amount) and position 4 or 6 (maximum amount) depending on your model. Close the cover ensuring that the open button locks properly before starting a cycle.

How to adjust the dosage: A low setting (level 1) is sufficient if your dishes dry perfectly and shine without issue. Gradually increase the level if you notice spots or streaks of dry water droplets on your dishes and glasses. Conversely, decrease the level if you see whitish streaks or bluish films indicating an excess of rinse aid.

Test the setting on one or two wash cycles and adjust according to the results. For better drying performance, you can also activate the XtraDry option during the program and check that the AirDry option is enabled (which is the default setting). Remember that we recommend always using rinse aid specifically designed for dishwashers, even if you are using all-in-one tablets, to achieve the best drying and shine results.

User manual ARTHUR MARTIN Dishwasher : user manuals and guides in PDF

Models ARTHUR MARTIN Dishwasher most viewed

Other categories ARTHUR MARTIN

Recent questions about Dishwasher ARTHUR MARTIN