How to make the print darker on the TSC RF-BHS printer?

Question

Accepted Answer

To make the print darker on your TSC RF-BHS printer, you need to adjust the print density settings. Here are the steps to follow:

Steps to increase print density:

Access the printer settings: Open the printer properties through your computer's control panel or directly in the printer management software.
Find the print density option: Look for a section named "Print Quality" or "Print Density". Depending on the driver or software, this may be a slider or a numeric field.
Increase the density: Raise the density value to achieve a darker print. Do this gradually to avoid overloading with ink or toner.
Perform a test print: Print a test page to check if the quality meets your expectations. Adjust again if necessary.

If after these adjustments the print remains too light, ensure that the ribbon or print consumable is in good condition and compatible with your printer. A worn or unsuitable consumable can affect print quality.

User manual TSC Printer : user manuals and guides in PDF

Models TSC Printer most viewed

Other categories TSC

Recent questions about Printer TSC