Q: What does error code E9 mean on the ROSIERES RFZP797IN WIFI built-in oven and how can it be resolved?

The error code E9 on the ROSIERES RFZP797IN WIFI built-in oven generally indicates a problem related to the temperature sensor or a malfunction of the thermal control system. Possible causes of error code E9: Failure or poor contact of the temperature sensor. Electrical issue at the level of internal connections. Failure of the oven's electronic control module. Steps to attempt to resolve error code E9: Turn off the power to the oven by unplugging it or turning off the circuit breaker, then leave it powered off for about 10 minutes to reset the system. Check the temperature sensor if you have access: ensure it is properly connected, clean, and undamaged. Inspect the visible internal electrical connections for any loose or damaged wires. Reconnect the oven and turn it on to check if the error code disappears. If the E9 code persists despite these checks, it is recommended to contact a qualified professional or the ROSIERES customer service for appropriate diagnosis and repair.

Q: What is the energy consumption of the ROSIERES RFE 6659 oven?

The ROSIERES RFE 6659 oven has an A-class energy consumption , corresponding to the best energy efficiency standards for built-in ovens. This 65-liter model has a maximum power of 2500 W and operates at a voltage of 230 V. Energy consumption varies depending on the cooking mode and duration. On average, a cooking cycle consumes between 0.8 and 1.5 kWh , depending on the set temperature and usage time. This consumption is generally expressed in kilowatt-hours (kWh) per cycle or as an annual estimate. A typical high-temperature cycle (220-240°C) will consume more than cooking at moderate temperatures (140-160°C). The two pyrolytic cleaning cycles integrated into the oven represent additional energy consumption: the PYRO ECO (90 minutes) cycle for medium soiling and the PYRO SUP (120 minutes) cycle for intensive cleaning. These high-temperature thermal destruction cleaning functions consume more energy but allow for better longevity of the oven and less chemical cleaning. To optimize the energy consumption of your ROSIERES RFE 6659 oven: Avoid unnecessary preheating, except for grilling and certain delicate pastries Use the appropriate cooking modes: fan heat for poultry and pastries, natural convection for red meats Limit door openings during cooking (each opening increases consumption) Prefer moderate temperatures with longer durations rather than very high temperatures Chain the pyrolysis directly after cooking to benefit from the residual heat of the oven To know the exact estimated annual consumption based on your personal usage, consult the energy label affixed to the oven or the product information notice provided with your appliance. These documents contain precise energy consumption data in accordance with current European standards.

Question 1

What are the roles of the two main knobs of the ROSIERES RFC3O5871PN oven and how to use them?

Accepted Answer

The control panel of the ROSIERES RFC3O5871PN oven indeed includes two main rotary knobs, which have distinct roles:

Left knob - Function selection

This knob allows you to choose the cooking mode from 8 options: pulse heat, natural convection, grill, defrost, etc. Turn it to scroll through the available modes. The LCD screen then displays the selected mode.

Right knob - Program or setting selection

This knob is used to control the additional parameters of your cooking: temperature, duration, programmed end time, etc. Turn it to adjust these values in increments.

How to validate your choices

A SELECT button (central button) allows you to navigate between the different settings: timer, cooking time, end cooking time, and temperature display. The +/- buttons complement these controls for fine adjustments.

This is a deliberately streamlined interface: no button to press, just two rotary knobs and a validation button. This design simplifies everyday use.

Question 2

How to change the temperature during cooking on the ROSIERES RFC3O5871PN oven

Accepted Answer

You can change the temperature at any time during the cooking of the ROSIERES RFC3O5871PN oven using the + and - adjustment buttons located on the control panel.

Steps to change the temperature while cooking:

Press the + button to increase the temperature
Press the - button to decrease the temperature
The new temperature is displayed immediately on the LCD screen
The adjustment is made in increments and you can set a temperature between 50°C and MAX depending on the selected cooking mode

Important: The recommended temperatures (defrosting: 180-210°C, fan-assisted heat: 190°C, natural convection: 230°C, grill: 220°C) are guidelines to be adapted according to your dish. If you notice excessive smoke during cooking, immediately reduce the temperature by pressing the - button.

Question 3

What does error code 09 mean on the ROSIERES RFZP797IN WIFI built-in oven and how can it be resolved?

Accepted Answer

Error code 09 on the ROSIERES RFZP797IN WIFI built-in oven generally indicates a communication problem between the internal electronic components of the appliance. Here’s how you can attempt to resolve this issue:

Steps to resolve error code 09:

Unplug the oven: Cut the power supply by unplugging the oven or turning off the circuit breaker for about 10 minutes. This allows the electronic system to reset.
Check the connections: Ensure that all internal (if accessible) and external connections are secure and in good condition. Sometimes, a poorly connected cable can cause this type of error.
Inspect the wiring: If possible, check that the cables are not damaged, cut, or disconnected inside the oven.
Reconnect and test: After these checks, plug the oven back in and turn it on to see if the error persists.

If error code 09 continues to appear despite these checks, it is recommended to contact an authorized technical service or a qualified professional. This type of error may require specific intervention on the internal electronic components of the oven.

Question 4

What does error code E9 mean on the ROSIERES RFZP797IN WIFI built-in oven and how can it be resolved?

Accepted Answer

The error code E9 on the ROSIERES RFZP797IN WIFI built-in oven generally indicates a problem related to the temperature sensor or a malfunction of the thermal control system.

Possible causes of error code E9:

Failure or poor contact of the temperature sensor.
Electrical issue at the level of internal connections.
Failure of the oven's electronic control module.

Steps to attempt to resolve error code E9:

Turn off the power to the oven by unplugging it or turning off the circuit breaker, then leave it powered off for about 10 minutes to reset the system.
Check the temperature sensor if you have access: ensure it is properly connected, clean, and undamaged.
Inspect the visible internal electrical connections for any loose or damaged wires.
Reconnect the oven and turn it on to check if the error code disappears.

If the E9 code persists despite these checks, it is recommended to contact a qualified professional or the ROSIERES customer service for appropriate diagnosis and repair.

Question 5

How to use the rotisserie function of the ROSIERES RFZP797IN WIFI oven to cook a roast chicken?

Accepted Answer

To effectively use the rotisserie function of your ROSIERES RFZP797IN WIFI oven and prepare a tasty roast chicken, follow these steps:

1. Preparing the chicken

Clean and empty the chicken.
Season it to your taste with salt, pepper, herbs, or spices.
You can brush the skin with olive oil or butter for a crispy skin.

2. Installing the rotisserie spit

Insert the spit through the chicken, ensuring it is well-centered for even cooking.
Secure the chicken tightly with the provided clamps to prevent it from moving during rotation.

3. Setting up in the oven

Place the spit with the chicken in the oven, engaging it properly in the rotation motor.
Make sure the chicken can turn freely without touching the walls of the oven.

4. Selecting the function and settings

Select the rotisserie function on your ROSIERES RFZP797IN WIFI oven.
Set the temperature generally between 180°C and 200°C, suitable for cooking chicken.

5. Cooking and monitoring

Start the cooking process. The chicken will rotate slowly for even cooking.
Monitor the cooking and check the internal temperature of the chicken with a meat thermometer. Cooking is optimal when the temperature reaches 75°C at the center.

6. Finishing

Once cooked, carefully remove the chicken from the spit.
Let it rest for a few minutes before carving to allow the juices to redistribute.

7. Serving

Serve your roast chicken with your choice of sides and enjoy a delicious and perfectly cooked dish thanks to the rotisserie function of your oven.

Question 6

Why does the modified temperature on the ROSIERES RFR1164IN refrigerator not stay displayed and revert to the default temperature?

Accepted Answer

If the temperature you modify on your ROSIERES RFR1164IN refrigerator does not stay displayed and consistently reverts to the default value, several causes may explain this behavior:

1. Activated operating mode

Some models have specific modes (such as an eco or vacation mode) that may restrict or automatically reset temperature settings. Check if such a mode is activated and disable it to modify the temperature freely.

2. Issue with controls or display

A faulty button or control panel may prevent the new setting from being registered.
A malfunction of the digital display may also cause a return to the default temperature.

Try pressing the buttons correctly and check if they respond normally.

3. Automatic system reset

Some refrigerators may reset their settings in case of a power outage or electronic issue. Ensure that the appliance is properly powered and that the electrical connections are stable.

4. Ambient temperature or usage conditions

Extreme ambient temperatures or non-compliant usage (door left open too long, overload) can influence the operation and regulation of the temperature.

Practical tips

Try modifying the temperature by following the procedure indicated on the control panel, possibly holding the button down for a few seconds.
Check that the refrigerator door closes properly.
If the problem persists, an electronic fault may be involved and require the intervention of a professional.

Question 7

What is the energy consumption of the ROSIERES RFE 6659 oven?

Accepted Answer

The ROSIERES RFE 6659 oven has an A-class energy consumption, corresponding to the best energy efficiency standards for built-in ovens. This 65-liter model has a maximum power of 2500 W and operates at a voltage of 230 V.

Energy consumption varies depending on the cooking mode and duration. On average, a cooking cycle consumes between 0.8 and 1.5 kWh, depending on the set temperature and usage time. This consumption is generally expressed in kilowatt-hours (kWh) per cycle or as an annual estimate. A typical high-temperature cycle (220-240°C) will consume more than cooking at moderate temperatures (140-160°C).

The two pyrolytic cleaning cycles integrated into the oven represent additional energy consumption: the PYRO ECO (90 minutes) cycle for medium soiling and the PYRO SUP (120 minutes) cycle for intensive cleaning. These high-temperature thermal destruction cleaning functions consume more energy but allow for better longevity of the oven and less chemical cleaning.

To optimize the energy consumption of your ROSIERES RFE 6659 oven:

Avoid unnecessary preheating, except for grilling and certain delicate pastries
Use the appropriate cooking modes: fan heat for poultry and pastries, natural convection for red meats
Limit door openings during cooking (each opening increases consumption)
Prefer moderate temperatures with longer durations rather than very high temperatures
Chain the pyrolysis directly after cooking to benefit from the residual heat of the oven

To know the exact estimated annual consumption based on your personal usage, consult the energy label affixed to the oven or the product information notice provided with your appliance. These documents contain precise energy consumption data in accordance with current European standards.

Question 8

What does error 09 mean on the ROSIERES RFZP787IN WIFI oven and how can it be resolved?

Accepted Answer

Error 09 on the ROSIERES RFZP787IN WIFI oven generally indicates a problem related to the temperature probe or an internal sensor. Here’s how you can proceed to try to resolve this issue:

Steps to resolve error 09

Unplug the oven: Cut off the power supply to the oven for a few minutes to reset the system.
Check the temperature probe: Ensure that the probe is properly connected and shows no visible signs of damage.
Check electrical connections: Make sure that the cables and connectors related to the probe and sensors are securely attached and in good condition.
Restart the oven: Plug the appliance back in and check if the error persists.

If error 09 continues to appear after these checks, it is recommended to contact a qualified technician or the ROSIERES customer service for proper diagnosis and repair.

Question 9

How to change the displayed temperature on the ROSIERES RFC3O5871PN oven when it does not change?

Accepted Answer

If a temperature is displayed on your ROSIERES RFC3O5871PN oven and you are unable to change it, here are several steps to follow to resolve this issue:

1. Check the cooking mode

Make sure the oven is in cooking mode and not in programming or standby mode, as in some modes, it is not possible to change the temperature.

2. Use the adjustment controls

Press the button dedicated to temperature adjustment, if your model has one.
If the oven has a rotary knob, gently turn it one way or the other to adjust the temperature.

3. Check the control lock

Some ROSIERES ovens are equipped with a control lock function to prevent accidental changes. If this function is activated, you will not be able to change the temperature. To deactivate it, you usually need to hold down a specific button for a few seconds. Try holding the "Lock" button or a padlock symbol to see if this releases the settings.

4. Reset the oven

If none of the previous steps work, unplug the oven for about 5 minutes and then plug it back in. This reset can correct temporary system anomalies.

By following these tips, you should be able to change the displayed temperature on your ROSIERES RFC3O5871PN oven. If the problem persists, it may be a technical malfunction requiring professional intervention.

Question 10

How to set the cooking temperature according to the cooking mode on the ROSIERES RFC3O5871PN oven?

Accepted Answer

To set the cooking temperature based on the chosen cooking mode on your ROSIERES RFC3O5871PN oven, follow the steps below:

1. Selecting the cooking mode

Turn the mode selection knob to choose the mode suitable for your preparation, for example:

Convection heat
Grill
Traditional heat
Defrost

2. Setting the temperature

After selecting the cooking mode, set the desired temperature using the dedicated button (rotary or touch depending on the model). The digital or analog display will indicate the chosen temperature.

3. Starting and preheating

Press the start button or confirm the selection to begin preheating. Wait for the oven to reach the programmed temperature before inserting your food, which is usually indicated by a light or sound signal.

4. Additional tips

Adjust the temperature according to the type of food and cooking mode for optimal results.
Do not change the temperature during cooking unless the recipe indicates it.
Use the recommended accessories for each cooking mode.

By following these steps, you will be able to easily set the temperature according to the chosen mode for successful cooking with your ROSIERES RFC3O5871PN oven.

User manual ROSIERES Built-in oven : user manuals and guides in PDF

Models ROSIERES Built-in oven most viewed

Other categories ROSIERES

Recent questions about Built-in oven ROSIERES