How to replace the battery of the YARDFORCE Compact 300RBS robotic mower?

Question

Accepted Answer

To replace the battery of your YARDFORCE Compact 300RBS robotic mower, follow these simple steps:

Turn off the robot: Make sure the robot is turned off and disconnected from the charging station to avoid any electrical risk.
Access the battery compartment: Carefully turn the robot over and locate the battery compartment, usually located under the lower cover.
Remove the cover: Unscrew the screws or unclip the cover depending on the fastening system used.
Disconnect the battery: Carefully unplug the battery connectors to avoid damaging the cables.
Remove the used battery: Take the battery out of its location.
Install the new battery: Place the new battery in the compartment, then reconnect the connectors while respecting the polarity.
Close the compartment: Replace the cover and screw it back on securely.
Recharge and test: Put the robot back on its charging station and let it charge completely before putting it back into service.

Make sure to use a compatible and original battery to ensure the proper functioning and safety of your robotic mower.

User manual YARDFORCE Robot mower : user manuals and guides in PDF