What does error code E1 mean on the LANDXCAPE LX790i?

Q: What does error code E1 mean on the LANDXCAPE LX790i?

The error code E1 indicates that the two ends of the boundary wire are incorrectly connected to the charging station - they are reversed. How to fix error code E1 Go to the charging station and locate the two wires coming from the boundary cable. Disconnect them, then reconnect them by reversing their position (the wire connected on the left goes to the right, and vice versa). Restart the LX790i and check that the E1 code has disappeared. If the E1 code persists after reversing the connections, the boundary wire is likely cut or damaged somewhere in the garden. Check the entire length of the wire for any cut, pinched, or damaged areas. Note: The PDF of this manual lists the error codes from -83- to -8E-, but does not mention E1 under this exact label. However, this meaning is common to LANDXCAPE robotic mowers in the same range as the LX790i.

Question

Accepted Answer

The error code E1 indicates that the two ends of the boundary wire are incorrectly connected to the charging station - they are reversed.

How to fix error code E1

Go to the charging station and locate the two wires coming from the boundary cable.
Disconnect them, then reconnect them by reversing their position (the wire connected on the left goes to the right, and vice versa).
Restart the LX790i and check that the E1 code has disappeared.

If the E1 code persists after reversing the connections, the boundary wire is likely cut or damaged somewhere in the garden. Check the entire length of the wire for any cut, pinched, or damaged areas.

Note: The PDF of this manual lists the error codes from -83- to -8E-, but does not mention E1 under this exact label. However, this meaning is common to LANDXCAPE robotic mowers in the same range as the LX790i.

User manual LANDXCAPE Robot mower : user manuals and guides in PDF

Models LANDXCAPE Robot mower most viewed

Other categories LANDXCAPE

Recent questions about Robot mower LANDXCAPE