User manual Livarno Lux Aroma diffuser : 1 free PDF user manuals

Q: How to replace the power adapter of the diffuser LADG 12 A1?

For your Livarno Lux LADG 12 A1 diffuser, the original power adapter has the reference SL-XQH-2400500ES . If you need to replace it, you will need an adapter with the exact following specifications: Input Voltage: 100-240V AC, 50/60 Hz (universal compatible) Output Voltage: 24V DC Current: 0.5A (total power: 12W) Connector Polarity: positive inside, negative outside The manufacturer specifies in the manual that if the adapter is defective, it must be completely replaced with an identical model - it cannot be repaired. You can look for a 24V 0.5A 12W adapter with the correct polarity from specialized spare parts retailers (Spareka, FixPart) or large online marketplaces. When purchasing, make sure that all these characteristics are mentioned.

Q: Why is the LADG 12 A1 diffuser flashing red?

A red flash on the LADG 12 A1 indicates that the water tank is empty. The device has an automatic shut-off feature that triggers this warning light when there is a lack of water. What to do: Turn off the diffuser and unplug it from the power source Fill the water tank with tap water (between 20 and 100 ml, up to the MAX line marked) Add 2 to 4 drops of essential oil if desired Replace the lid and cover Plug it back in and press the power button Is the red still flashing after filling? The ceramic disc (ultrasonic membrane) may be clogged or scaled. Gently clean it with a damp cotton swab, possibly with a bit of commercial descaler. Never use a sharp object. Important: Never use the diffuser with an empty tank, and change the water every 3 days to prevent the proliferation of microorganisms.