Question 1

How to reset the PXL2470MW monitor in case of forgotten password?

Accepted Answer

To reset the video and audio settings of the Planar PXL2470MW monitor to factory defaults, follow these steps:

Press the Menu button on the monitor to open the OSD (on-screen display) menu
Navigate to the MEMORY RECALL option
Select it to restore the factory settings for video and audio controls

Regarding the password: The manual for this notice does not include a password reset or security unlock procedure. This security feature is not documented in the standard controls of the monitor. If you have forgotten the screen password, it is recommended to contact Planar support directly with proof of purchase, as they may have specialized procedures or tools not available in the user manual. You may also check the original product documentation or packaging for a possible recovery key.

Question 2

How to unlock the control buttons of the PXL2470MW monitor?

Accepted Answer

The Planar PXL2470MW monitor offers two levels of unlocking depending on your needs:

Unlock OSD buttons (display settings)

Press and hold both the button 1 and the ▲ (up arrow) button simultaneously for 10 seconds. A confirmation message will appear for 3 seconds. The power button will remain active in this mode.

Unlock all buttons (including power)

Press and hold both the button 1 and the ▼ (down arrow) button simultaneously for 10 seconds. This unlocks both the OSD controls and the power button.

The same key combination that locks the monitor also unlocks it - just hold them down for 10 seconds again to toggle between locked and unlocked states. A brief confirmation message will appear on the screen when the unlocking is successful.

User manual Planar Monitor : user manuals and guides in PDF

Models Planar Monitor most viewed

Other categories Planar

Recent questions about Monitor Planar