UltraRes L URL109 - Monitor Planar - Free user manual and instructions
Find the device manual for free UltraRes L URL109 Planar in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Professional Large Format Display |
| Model | UltraRes L URL109 |
| Brand | Planar |
| Display Size | 109 inches (diagonal) |
| Resolution | 3840 x 2160 (4K UHD) |
| Brightness | 500 cd/m² (typical) |
| Contrast Ratio | 4000:1 (typical) |
| Viewing Angle | 178° horizontal / 178° vertical |
| Input Connectivity | HDMI 2.0 x2, DisplayPort 1.2, USB-C (DisplayPort Alt Mode) |
| Control | RS-232, IR, Ethernet |
| Power Consumption | 400W (typical), <0.5W (standby) |
| Power Supply | AC 100-240V, 50/60Hz |
| Dimensions (W x H x D) | 97 x 54 x 3.9 inches (without stand) |
| Weight | 180 lbs (net) |
| Mounting | VESA 600 x 400 mm |
| Bezel Width | 12 mm (top/side), 18 mm (bottom) |
| Operating Temperature | 0°C to 40°C |
| Storage Temperature | -20°C to 60°C |
| Included Accessories | Remote control, batteries, power cable, HDMI cable, user manual |
| Warranty | 3 years limited (parts and labor) |
| Cleaning | Use a soft, dry cloth. Do not use chemical cleaners. |
Frequently Asked Questions - UltraRes L URL109 Planar
How do I turn on the Planar UltraRes L URL109?
Press the power button on the lower right bezel or use the remote control power button. The indicator light will turn blue.
What resolutions does the display support?
The display supports up to 3840 x 2160 at 60Hz over HDMI 2.0 and DisplayPort 1.2. Lower resolutions are also supported.
Can I mount this display on a wall?
Yes, it supports VESA 600x400 mm mounting. Use appropriate hardware rated for the weight. Ensure the wall can support over 180 lbs.
How do I clean the screen?
Turn off the display and unplug it. Gently wipe the screen with a soft, dry microfiber cloth. For stubborn dirt, slightly dampen the cloth with water. Do not use alcohol or ammonia.
How do I update the firmware?
Download the latest firmware from Planar's support page. Save it to a USB drive, insert into the USB port on the display, and navigate to Settings > Firmware Update in the OSD menu.
How do I adjust the color settings?
Press the Menu button on the remote or bezel, go to Color Settings. You can adjust brightness, contrast, RGB, and select preset modes like sRGB, DCI-P3.
What is the power consumption in standby?
In standby mode, the display consumes less than 0.5 watts. In normal operation, it consumes up to 400 watts.
My remote control is not working. What should I do?
First, check the batteries. Replace with two AA batteries if needed. Ensure no obstructions between remote and IR sensor (located at bottom right of bezel). Reset the display by unplugging for 30 seconds.
Can I connect multiple video sources?
Yes, the display has HDMI 2.0 (x2), DisplayPort 1.2, and USB-C. Use the Input Source button on the remote or bezel to cycle between them.
The screen shows 'No Signal'. What does this mean?
This means no video source is detected. Ensure the source device is turned on and connected securely. Try a different cable or input port. Also verify the source output resolution is compatible (3840x2160 or lower).
User questions about UltraRes L URL109 Planar
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Monitor in PDF format for free! Find your manual UltraRes L URL109 - Planar and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. UltraRes L URL109 by Planar.
USER MANUAL UltraRes L URL109 Planar
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Planar
Model : UltraRes L URL109
Category : Monitor