User manual Perel Camera : 1 free PDF user manuals

Q: How do I change the password of the WLC003 camera if I can't access the menu?

If you are unable to access the menu to change the password of your Perel WLC003 camera, you can perform a factory reset which will erase the current password. Reset procedure: Access the menu by pressing the Menu button Navigate to the 'Reset Settings' option Confirm with the OK button This operation will reset the camera to its factory settings and remove the forgotten password. You will then be able to access the configuration normally. Warning: all custom settings will also be erased. If you are having trouble navigating the menu, make sure the mode switch is in the TEST position to access the configuration, and give the system 10-20 seconds to respond to your commands.

Q: How to change the password of the Perel WLC003?

To change the password (PIN) of your Perel WLC003 camera, follow these steps: Access the configuration menu of the camera Select the Password Protection option Enter a new PIN code consisting of 4 digits (0-9 only) Confirm your new code If you forget the PIN: If you have lost your PIN, you can reset the camera to its factory settings via the Reset settings option in the menu. This action will delete all settings and the password.