D603 - Video projector ACER - Free user manual and instructions
Find the device manual for free D603 ACER in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | DLP Video Projector |
| Brand | Acer |
| Model | D603 |
| Display Technology | DLP |
| Native Resolution | XGA (1024 x 768) |
| Brightness | 2000 ANSI Lumens |
| Contrast Ratio | 2000:1 |
| Lens Zoom | 1.1x Manual |
| Lamp Type | 200W |
| Lamp Life (Standard/Eco) | 4000 / 6000 hours |
| Input Connectors | VGA, S-Video, Composite, RS-232 |
| Output Connectors | VGA Loop-Through |
| Audio | 2W Mono Speaker |
| Keystone Correction | ±40° Vertical |
| Projection Distance | 1.0 - 11.8 m |
| Screen Size | 27″ - 300″ |
| Dimensions (W x D x H) | 290 x 235 x 109 mm |
| Weight | 2.6 kg |
| Power Consumption | 280W (Standby 1W) |
| Noise Level | 30 dBA (Eco Mode) |
| Operating Temperature | 0°C to 40°C |
| Included Accessories | Remote Control, Power Cord, VGA Cable, User Manual |
| Maintenance | Clean air filter every 1000h; Replace lamp when needed |
| Safety Features | Overheat Protection, Auto Shutdown |
Frequently Asked Questions - D603 ACER
How do I replace the lamp?
Turn off and unplug the projector. Allow it to cool for at least 45 minutes. Loosen the lamp cover screw, remove the cover, unscrew the lamp module, and replace it with a new AP.. series lamp. Reset the lamp timer via the OSD menu.
How to clean the air filter?
Turn off and unplug the projector. Wait for cooling. Remove the air filter cover on the side, take out the filter, and clean it with a vacuum cleaner or wash with mild detergent. Dry completely before reinserting. Replace filter every 5000 hours.
How to connect my laptop to the projector?
Use a VGA cable to connect your laptop's VGA output to the projector's VGA input. Alternatively, if your laptop has HDMI, but this model does not include HDMI, use a VGA adapter. Then press the 'Source' button on the remote to select VGA.
Why is there no image displayed?
Check that the projector is turned on and the lamp is lit. Ensure the correct input source is selected (press 'Source'). Verify cable connections. If using a laptop, it may need to be set to extended display (Windows key + P). Also, check if the lens cap is removed.
How to adjust keystone correction?
Press the 'Keystone' button on the remote control or navigate to the OSD menu under 'Image' settings. Use the arrow keys to adjust vertical keystone up or down until the image is rectangular.
Can I mount the projector on the ceiling?
Yes, the Acer D603 is compatible with a ceiling mount. Use a standard projector mount with 3 or 4 mounting holes (check spacing). Ensure the mount supports up to 2.6 kg. Adjust image orientation via the OSD menu (Projection setting: Ceiling).
What is the lamp life?
The lamp lasts up to 4000 hours in standard mode and up to 6000 hours in Eco mode. Actual life varies with usage conditions.
How to reset the lamp timer after replacement?
Go to the OSD menu, select 'Management', then 'Lamp Settings' > 'Lamp Hour Reset'. Confirm when prompted. Always reset the timer after installing a new lamp to ensure accurate usage tracking.
Does the D603 support 3D projection?
No, the Acer D603 does not support 3D content. It is a standard DLP projector designed for 2D presentations and videos.
Where can I find the serial number?
The serial number is printed on a label located on the bottom of the projector. You may also find it on the original packaging or in the system information menu of the projector.
User questions about D603 ACER
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Video projector in PDF format for free! Find your manual D603 - ACER and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. D603 by ACER.