J220 - Pregnant JBL - Free user manual and instructions
Find the device manual for free J220 JBL in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Bookshelf Speaker |
| Dimensions (H x W x D) | 250 x 150 x 200 mm |
| Weight | 3.5 kg per speaker |
| Power Supply | Passive, requires external amplifier |
| Impedance | 8 ohms |
| Recommended Amplifier Power | 20-100 watts per channel |
| Frequency Response | 55 Hz - 20 kHz |
| Sensitivity | 88 dB (1W/1m) |
| Driver Configuration | 2-way: 1" tweeter, 5.25" woofer |
| Enclosure Type | Bass-reflex with front port |
| Main Functions | High-fidelity stereo sound reproduction for music and home theater |
| Care and Cleaning | Wipe with a soft, dry cloth. Avoid liquids and abrasive cleaners. |
| Safety Precautions | Place on stable surface; keep away from moisture; ensure proper ventilation around amplifier. |
| Spare Parts and Repairability | Replacement drivers and crossover components available; service by authorized technician recommended. |
| General Information | Designed for bookshelf or stand mounting; compatible with most home stereo receivers. |
Frequently Asked Questions - J220 JBL
What is the recommended amplifier power for the JBL J220 speakers?
The JBL J220 speakers are rated for 20-100 watts per channel at 8 ohms. Use a compatible stereo amplifier or receiver within this range for optimal performance.
Can I use the JBL J220 speakers for surround sound?
Yes, they can be used as front, rear, or surround speakers in a home theater setup. Ensure your receiver has a matching impedance setting.
What type of speaker wire should I use with the J220?
Use 16-gauge or thicker speaker wire for runs up to 15 meters. For longer distances, use 14-gauge wire to minimize signal loss.
Are the JBL J220 speakers magnetically shielded?
No, they are not magnetically shielded. Keep them at least 30 cm away from CRT monitors or other sensitive electronic devices.
What is the frequency response of the JBL J220?
The frequency response is 55 Hz to 20 kHz, providing a balanced sound with adequate bass for a bookshelf speaker.
How do I connect the JBL J220 speakers to my amplifier?
Connect the positive (+) terminal of the speaker to the positive output of the amplifier, and negative to negative. Ensure the amplifier is turned off during connection.
Can I bi-wire the JBL J220 speakers?
No, the J220 speakers have a single pair of binding posts and do not support bi-wiring or bi-amping.
What are the dimensions of the JBL J220?
Each speaker measures approximately 250 mm high, 150 mm wide, and 200 mm deep. They are designed to fit on standard bookshelves.
How should I clean the JBL J220 speakers?
Use a soft, dry microfiber cloth to dust the cabinet and grille. Avoid any liquid cleaners as they may damage the wood veneer.
Is the JBL J220 a passive or active speaker?
It is a passive speaker, meaning it requires an external amplifier or receiver to produce sound.
User questions about J220 JBL
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Pregnant in PDF format for free! Find your manual J220 - JBL and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. J220 by JBL.