dsPIC33CK512MP706 - Microcontroller Microchip - Free user manual and instructions
Find the device manual for free dsPIC33CK512MP706 Microchip in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Type | Microcontroller |
| Manufacturer | Microchip Technology |
| Model | dsPIC33CK512MP706 |
| Architecture | 16-bit dsPIC33C |
| Core | dsPIC33C / Digital Signal Controller |
| Maximum CPU Speed | 100 MHz |
| Flash Memory | 512 KB |
| RAM | 64 KB |
| Supply Voltage | 3.0V – 3.6V |
| I/O Pins | Up to 56 |
| ADC Channels | Up to 28 (12-bit) |
| DAC Outputs | 2 (12-bit) |
| Timers | 8 (32-bit) |
| Communication Interfaces | SPI, I2C, UART, CAN-FD |
| PWM Channels | Up to 16 (high-resolution) |
| Operating Temperature | -40°C to +125°C |
| Package Type | TQFP-64 (or similar) |
| RoHS Compliant | Yes |
| User Manual Pages | 520 pages (English) |
Frequently Asked Questions - dsPIC33CK512MP706 Microchip
How do I program the dsPIC33CK512MP706?
The device can be programmed using MPLAB X IDE with a programmer like PICkit 4 or ICD 4. Use the ICSP interface on pins PGC and PGD.
What is the maximum operating speed of this microcontroller?
The dsPIC33CK512MP706 can run at a maximum 100 MHz core frequency.
What is the supply voltage range?
The recommended operating voltage is 3.0V to 3.6V.
How many PWM channels are available?
It provides up to 16 high-resolution PWM channels with independent timing and dead-time control.
Does it support CAN communication?
Yes, it includes a CAN-FD (Controller Area Network with Flexible Data Rate) module.
What are the power saving modes?
The device supports multiple low-power modes: Idle, Sleep, and Deep Sleep with selectable wake-up sources.
How many analog inputs does it have?
It features up to 28 analog inputs with a 12-bit ADC and two 12-bit DAC outputs.
What development tools are recommended?
Microchip recommends MPLAB X IDE, XC16 compiler, and MPLAB Code Configurator (MCC) for easy project setup.
Can I use Arduino libraries with this chip?
No, it is not Arduino-compatible. You must use Microchip's MPLAB ecosystem and XC16 compiler.
Where can I find the full datasheet?
The full datasheet and user manual are available on Microchip's official website (www.microchip.com) for free download in PDF format.
User questions about dsPIC33CK512MP706 Microchip
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Microcontroller in PDF format for free! Find your manual dsPIC33CK512MP706 - Microchip and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. dsPIC33CK512MP706 by Microchip.