EK40BMG - Microphone Eikon - Free user manual and instructions

Brand	Eikon
Model	EK40BMG
Product Type	Dynamic Microphone
Polar Pattern	Cardioid
Frequency Response	50 Hz - 15 kHz
Impedance	600 Ω
Sensitivity	-54 dBV/Pa at 1 kHz
Connector	XLR (3-pin male)
Power Requirement	None (passive)
Dimensions (approx.)	165 mm x 52 mm (length x diameter)
Weight	300 g
Material	Metal body with grille
Color	Black
Application	Live vocals, speech, PA systems
Included Accessories	Microphone clip, user manual
Cleaning Instructions	Wipe with a soft, dry cloth
Safety Precautions	Avoid moisture and drops
Spare Parts Availability	Contact Eikon support for grille or clip
Repair Information	Refer to authorized service center

Frequently Asked Questions - EK40BMG Eikon

What type of microphone is the EK40BMG?

The EK40BMG is a dynamic microphone with a cardioid pickup pattern, ideal for live vocals and speech.

Does the microphone require phantom power?

No, it is a dynamic microphone and works without phantom power. Simply connect via XLR cable to an audio interface or mixer.

How do I connect the microphone to a computer?

You need an audio interface or a USB adapter with XLR input. Connect the microphone via XLR cable, then connect the interface to your computer via USB.

How can I reduce feedback during live use?

Keep the microphone close to your mouth, use a cardioid pattern to reject rear sounds, and avoid pointing speakers directly at the microphone.

Can I use this microphone for recording instruments?

Yes, it works well for loud instruments like guitar amps, drums (overhead), and brass due to its dynamic nature.

How do I clean the microphone grille?

Remove the grille if possible (unscrew or unclip), gently brush away debris, and wipe with a soft damp cloth. Let it dry completely before reassembly.

What cable do I need?

A standard XLR male-to-female cable is used. For computers, an XLR-to-USB cable or audio interface is required.

Is the microphone compatible with wireless systems?

The EK40BMG is a wired microphone, but it can be used with a wireless XLR transmitter that accepts dynamic microphones.

What is the frequency response of the EK40BMG?

The frequency response is 50 Hz to 15 kHz, tailored for vocal clarity and speech intelligibility.

Where can I find a replacement clip or parts?

Contact Eikon customer support or authorized dealers. Spare parts like clips and grilles are available upon request.

USER MANUAL EK40BMG Eikon

Black desktop microphone with a curved neck and base (no visible text or symbols)

ITALIANO

ENGLISH

Model	EK40BMG
Microphone type	Electrete
Polar pattern	Cardioid
Sensitivity	-40dB±2dB
Frequency response	40Hz-20kHz
Power supply	Phantom 48V DC or 3V (2 x 1,5V AAA type batteries)
Controls	ON/OFF switch
Output connector	XLR Male
Output Impedance	75Ω
Gooseneck length	445 mm
Dimensions (WxHxD)	115x30x140 mm
Weight	0,50 Kg

Thank you for choosing a Eikon product, and for your confidence towards our brand, synonymous with professionalism, high quality and reliability.

Description

Professional table microphone, high sensitivity condenser microphone capsule, flexible gooseneck, illuminated ring to indicate operating condition, and on/off switch*. Perfect for all PA applications, such as conference and paging. It can be powered by battery or as by Phantom power.

This product complies with CE directives.

Precautions

WARNING

To avoid risk of electric shock, please don't open the product. To prevent risk of fire or electric shock, don't expose this product to water and/or moisture.

• Before installing this unit please carefully read these instructions, and keep this owner's manual for future reference.
• WARNING: improper installation could irreparably damage the unit.
• Be careful that unit operation may not cause damage to people.
• Place the unit in a location protected from weather and far from water and moisture.
• Don't place this unit close to heat sources (radiators, spotlights, amplifiers etc.)
• Avoid any liquid entering inside the unit
  • No user-serviceable parts inside. Refer servicing to an authorized maintenance centre only.

Installation

1. Insert two AA 1,5V batteries in battery compartment under the microphone base, respecting the polarity indicated inside the compartment.
   Note: using Phantom power, batteries are not necessary.
2. Being careful about mounting direction, insert the gooseneck connector on microphone base surface XLR connector.
3. Connect microphone base to an external unit (mixer, amplifier, etc.) using supplied cable. If the external unit microphone input can supply Phantom power, apply it to this microphone by switching Phantom power on.
   Note: before connecting the microphone to the external unit, it must be turned off and with its volume settings at minimum.
4. First of all turn on the microphone, then the unit and adjust its volume do desired level.
5. In order to obtain a perfect sound reproduction, the user should maintain a distance between 5 cm. (2") and 30 cm. (12") from microphone capsule.

Operating suggestions

• If the microphone is placed too close to speaker or its capsule is oriented towards a speaker, it could generate feedback (Larsen effect). Avoid placing the microphone too close to the speaker, and avoid orienting its capsule toward the speaker. IF, despite these practises, you hear feedback, please lower speaker volume.
• It's important to keep the anti-pop foam clean; foreign particles on the foam could modify frequency response. Periodically wash the anti-pop foam using warm water with mild soap, rinse the foam with clean water, then let the foam dry thoroughly before placing it again on the microphone.
• Due to the microphone's very high sensitivity, be careful the microphone isn't dropped and avoid shock, as it could be damaged.
• In order to maintain sensitivity and performance, avoid exposing the microphone to moisture or high temperatures.
• Use new batteries of high quality only; the use of discharged and/or low quality batteries could cause leakage of chemical substances that could damage the unit.

Technical Specifications

Model	EK40BMG
Microphone type	Electrete
Polar pattern	Cardioid
Sensitivity	-40dB±2dB
Frequency response	40Hz-20kHz
Power supply	Phantom 48V DC or 3V (2 x 1,5V AAA type batteries)
Controls	ON/OFF switch
Output connector	XLR Male
Output Impedance	75Ω
Gooseneck length	445 mm
Dimensions (WxHxD)	115x30x140 mm
Weight	0,50 Kg

EIKON

is a brand of

PROEL S.p.A.

(World Headquarters - Factory)