Eikon

WM700DHA - Microphone Eikon - Free user manual and instructions

Find the device manual for free WM700DHA Eikon in PDF.

📄 20 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice Eikon WM700DHA - page 2
View the manual : English EN Italiano IT
Pick your language and provide your email: we'll send you a specifically translated version.
Product TypeDynamic Microphone
Transducer TypeMoving Coil (Dynamic)
Polar PatternCardioid
Frequency Response50 Hz - 15 kHz
Impedance600 Ω
Sensitivity-54 dBV/Pa (2.0 mV/Pa)
Connector3-Pin XLR (Male)
Power RequirementPassive (No Phantom Power Needed)
DimensionsLength: 180 mm, Diameter: 50 mm
Weight350 g (12.3 oz)
Body MaterialZinc Alloy
ColorBlack
Included AccessoriesMicrophone Clip, Windscreen, 5/8" to 3/8" Adapter
Primary ApplicationsVocals, Speech, Instruments
Maintenance & CleaningWipe with a damp cloth; avoid liquids inside
Safety WarningsKeep away from children; do not expose to moisture or extreme temperatures
Spare Parts & RepairabilitySpare parts available upon request; consult manual for disassembly
Warranty1 year manufacturer warranty
CompatibilityWorks with any XLR audio system or interface with phantom power off

Frequently Asked Questions - WM700DHA Eikon

How do I connect the WM700DHA microphone to my computer?
You need an audio interface with an XLR input. Connect the microphone via an XLR cable to the interface, then connect the interface to your computer via USB or Thunderbolt.
Does the WM700DHA require phantom power?
No, the WM700DHA is a dynamic microphone and does not need phantom power. It operates passively.
What type of cable should I use with the WM700DHA?
Use a standard 3-pin XLR male to female microphone cable. Balanced XLR cables are recommended for noise rejection.
Can I use the WM700DHA for live vocals?
Yes, the cardioid polar pattern and dynamic capsule make it suitable for live vocals, reducing background noise and feedback.
How can I reduce plosive sounds (popping)?
Use the included windscreen or a pop filter placed between your mouth and the microphone. Also, position the microphone slightly off-axis.
Is the WM700DHA compatible with wireless systems?
The microphone itself is wired with XLR output. To use it wirelessly, you need a wireless transmitter that accepts XLR input, but that is not included.
How do I clean the WM700DHA microphone?
Wipe the exterior with a soft, damp cloth. Do not use any solvents or immerse the microphone in water. The grille can be gently cleaned with a brush.
What is the recommended distance from the mouth?
For best results, speak or sing about 5-15 cm (2-6 inches) away from the microphone. Adjust based on your volume and proximity effect.
My microphone has low output. What should I check?
Ensure the XLR cable is fully connected and not damaged. Check that the audio interface or mixer gain is turned up. The WM700DHA has moderate sensitivity, so you may need to increase gain.
Does the WM700DHA come with a warranty?
Yes, it includes a 1-year manufacturer warranty against defects. Keep your receipt for service.

User questions about WM700DHA Eikon

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Microphone in PDF format for free! Find your manual WM700DHA - Eikon and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. WM700DHA by Eikon.

USER MANUAL WM700DHA Eikon

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : Eikon

Model : WM700DHA

Category : Microphone