ZU500TST - Projector OPTOMA - Free user manual and instructions

Product type	DLP laser projector
Brand	OPTOMA
Model	ZU500TST
Display technology	DLP 0.67"
Light source	Laser (typical lifespan >20,000 hours)
Native resolution	WUXGA (1920 x 1200)
Brightness	5,000 ANSI lumens
Contrast ratio	300,000:1
Lens	Motorized zoom, short throw (0.49:1)
Keystone correction	Horizontal and vertical (±30°)
Dimensions (W x D x H)	424 x 376 x 158 mm
Net weight	9.2 kg
Power supply	100-240 V AC, 50/60 Hz
Power consumption	350 W (max)
Video inputs	2x HDMI 1.4a, 1x VGA, 1x DisplayPort
Network connectivity	Ethernet RJ45, RS232, 12V trigger
Noise level	28 dB (eco mode)
Maintenance	Clean air filter every 1,000 hours
Security	Kensington lock, security password
Box contents	Remote control, power cable, HDMI cable, documentation
Repairability	Access to filter and laser unit by authorized technician
Warranty	3 years (depending on country)

Frequently Asked Questions - ZU500TST OPTOMA

How to turn on the OPTOMA ZU500TST projector?

Make sure the power cable is plugged in. Press the Power button located on top of the projector or on the remote control. The green indicator light turns on. Wait a few seconds during startup.

How to connect my computer to the projector?

Use an HDMI or VGA cable depending on available ports. Connect one end to the projector and the other to the computer. Select the corresponding source via the Source button or the remote control.

How to clean the air filter of the ZU500TST?

Turn off the projector and unplug it. Open the filter access cover located on the side. Remove the filter, vacuum the dust or wash it with warm water (let it dry completely). Put it back. Cleaning recommended every 1,000 hours.

What is the lifespan of the laser light source?

The laser light source of the ZU500TST has a typical lifespan of over 20,000 hours under normal use. This may vary depending on usage conditions and ambient temperature.

How to adjust keystone correction?

Press the Keystone button on the remote control or navigate to the Display menu. Use the sliders to adjust horizontal and vertical correction until the image is rectangular.

Can the projector operate 24/7?

Yes, the ZU500TST is designed for 24/7 operation. It features an optimized cooling system and a dust-resistant air filter for intensive use.

How to update the projector firmware?

Download the latest firmware from support.optoma.com. Copy the file to a USB drive formatted in FAT32. Insert the drive into the projector's USB port, then go to Settings > Update. Follow the on-screen instructions.

What cables are included in the ZU500TST box?

The box contains: a power cable, an HDMI cable, a VGA cable (depending on version), a remote control with batteries, and a quick start guide. Check the product sheet for exact accessories.

What to do if the image does not display or is unstable?

Check the cable connections and the selected source. Make sure the computer resolution is compatible (max 1920x1200). Try pressing the Auto Sync button on the remote control. If the problem persists, restart the projector and the source device.

How to contact OPTOMA customer service for the ZU500TST?

Visit the official website www.optoma.com for local contact information. You can also call technical support at the number indicated in the warranty or send an email via the contact form.

USER MANUAL ZU500TST OPTOMA

Line drawing of a rectangular electronic device with ventilation grilles and a central screen (no text or symbols)

TABLE DES MATIÈRES

SÉCURITÉ ....3

COMPLIES WITH 21 CFR 1040.10 AND 1040.11 EXCEPT FOR DEVIATIONS PURSUANT TO LASER NOTICE No. 50, DATED JUNE 24, 2007. IEC/EN 60825-1:2007

LASER RADIATION DO NOT STARE INTO BEAM CLASS 2 LASER PRODUCT WAVE LENGTH: 450-460 nm / MAX OUTPUT: 15.9 mW / PULSE DURATION: 1.25 ms IEC 60825-1:2014 CLASS 1 LASER PRODUCT / RISK GROUP 2 Possibly hazardous optical radiation emitted from this product. Do not stare into the beam, May be harmful to the eyes.

IEC 60825-1:2007 2类激光产品

激光辐射 不要凝视激光束2类激光產品。

Diagram of a cable VGA connector with coiled cable and connectors (no text or symbols on the diagram itself)

Technical line drawing of a mechanical device with circular components and mounting base (no text or symbols)

Non	Item
5.	Câble Microphone
6.	Câble RJ-45 (Câble Cat5)
7.	Jack 12 V DC

Remarque :

ANNEXES

Unit 1, Network 41, Bourne End Mills

Hemel Hempstead, Herts,

HP1 2UJ, United Kingdom

www.optoma.eu

Téléphone

[e-mail]

Benelux BV

Randstad 22-123

1316 BW Almere

The Netherlands

www.optoma.nl

[phone]

[phone]

France

Bâtiment E

81-83 avenue Edouard Vaillant

92100 Boulogne Billancourt,

France

[phone]

[phone]

[e-mail]

Espagne

C/ José Hierro,36 Of. 1C

28522 Rivas VaciaMadrid,

Espagne

[phone]

[phone]

Allemagne

Wiesenstrasse 21 W

D40549 Düsseldorf,

Allemagne

[phone]

[phone]

[e-mail]

Scandinavie

Lerpeveien 25

3040 Drammen

Norvège

[phone]

[phone]

[e-mail]

PO.BOX 9515

3038 Drammen

Norvège

Corée

WOOMI TECH.CO.,LTD.

4F, Minu Bldg.33-14, Kangnam-Ku,

seoul,135-815, KOREA

+82+2+34430004

+82+2+34430005

Japan

東京都足立区綾瀬3-25-18

株式会社オーエス

[e-mail]

www.os-worldwide.com

Taiwan

12F., No. 213, Sec. 3, Beixin Rd.,

Xindian Dist., New Taipei City 231,

Taiwan, R.O.C.

www.optoma.com.tw

[phone]

[phone]

[e-mail]

asia.optoma.com

Hong Kong

Unit A, 27/F Dragon Centre,

79 Wing Hong Street,

Cheung Sha Wan,

Kowloon, Hong Kong

[phone]

[phone]

www.optoma.com.hk

China

5F, No. 1205, Kaixuan Rd.,

Changning District

Shanghai, 200052, China

[phone]

[phone]

www.optoma.com.cn