ActiveSense PBT7000SS - Blender SUNBEAM - Free user manual and instructions

Product Type	Blender
Brand	Sunbeam
Model	ActiveSense PBT7000SS
Dimensions (H x W x D)	40.6 x 17.8 x 17.8 cm (approx.)
Weight	3.6 kg (approx.)
Power Rating	700 W
Voltage	120 V (US standard)
Capacity	1.5 L (64 oz) glass jar
Speed Settings	Variable speed with pulse function
Control Type	Dial knob and push buttons
Jar Material	Glass
Blade Material	Stainless steel
Base Material	Brushed stainless steel and plastic
Dishwasher Safe Parts	Jar, lid, and blade assembly
BPA Free	Yes
Safety Features	Non-slip feet, overload protection, lid lock
Warranty	1 year limited
Included Accessories	Blender jar, lid, tamper, recipe book

Frequently Asked Questions - ActiveSense PBT7000SS SUNBEAM

How do I clean the Sunbeam ActiveSense PBT7000SS blender?

Most parts are dishwasher safe. The glass jar, lid, and blade assembly can be placed on the top rack. For hand washing, use warm soapy water and rinse thoroughly. Avoid immersing the motor base in water; wipe with a damp cloth.

Can I crush ice in this blender?

Yes, the 700W motor and stainless steel blades can crush ice for smoothies and frozen drinks. Use the pulse function for best results.

What is the maximum capacity for blending liquids?

The glass jar has a total capacity of 1.5 liters (64 oz). For hot liquids, do not fill beyond the 1.25 L mark to avoid overflow.

How do I use the pulse function?

Press and hold the Pulse button for short bursts. Release to stop. This is ideal for chopping or achieving a coarse texture.

Why does my blender suddenly stop during use?

The blender has overload protection. If it overheats, it will automatically shut off. Unplug and let it cool for 15-20 minutes before restarting.

Can I blend hot ingredients?

Allow hot liquids to cool to 70°C (160°F) before blending. Do not blend boiling liquids, as pressure buildup can cause the lid to pop off.

Is the blender jar BPA-free?

Yes, the glass jar is BPA-free and safe for food contact.

How do I replace the blade assembly?

The blade assembly is not user-serviceable. If damaged, contact Sunbeam customer support for replacement parts or service.

Can I use the blender to make nut butter?

Yes, but use the pulse function and scrape down sides frequently. Do not run continuously for more than 1 minute to avoid overheating.

What does the warranty cover?

The 1-year limited warranty covers defects in materials and workmanship. It does not cover normal wear or misuse. Keep your receipt for service.

USER MANUAL ActiveSense PBT7000SS SUNBEAM

Contents

Sunbeam's Safety Precautions 1

Welcome

2

Features of your Sunbeam ActiveSense ^TH Blender 3

Blend-N-Go™ Bottle Accessory 4

Before Using your ActiveSense™ Blender 5

Using your ActiveSense™ Blender 6

Blade and Jug Assembly 7

Using Your Blend-N-Go™ Bottle 8

Care and Cleaning 9

Handling Blending Tips 10

Frequently Asked Questions 11

Recipes

12

Important Instructions - Retain For Future Use

of status divergent area

Sunbeam's Safety Precautions

SAFFTY PRFCAUTIONS FOR YOUR SUNBFAM ACTIVESENSE™ BLENDER

- Ensure fingers are kept well away from the blades when in use.

- Do not blend warm/hot ingredients. Always cool ingredients to room temperature before processing.

- Hot/warm ingredients can eject out of the jug when a sudden steaming is caused.

- Do not immerse in water.

• Always operate on a flat surface.

• Take care when removing the Jug from the base or emptying the Jug as blades are extremely sharp.

- Switch off the appliance and disconnect from supply before changing accessories or approaching parts that move in use.

- Unwind cord fully before operating.

Sunbeam is very safety conscious when designing and manufacturing consumer products, but it is essential that the product user also exercise care when using an electrical appliance. Listed below are precautions which are essential for the safe use of an electrical appliance:

Read carefully and save all the instructions provided with an appliance.

- Always turn the power off at the power outlet before you insert or remove a plug. Remove by grasping the plug - do not pull on the cord.

- Turn the power off and remove the plug when the appliance is not in use and before cleaning

- Do not use your appliance with an extension cord unless this cord has been checked and tested by a qualified technician or service person.

- Always use your appliance from a power outlet of the voltage [A,C only] marked on the appliance.

- This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.

- Children should be supervised to ensure that they do not play with the appliance

- The temperature of accessible surfaces may be high when the appliance is operating.

- Never leave an appliance unattended while in use.

- Do not use an appliance for any purpose other than its intended use. Misuse will cause potential injury.

- Do not place an appliance on or near a hot gas flame, electric element or on a heated oven

• Do not place on top of any other appliance.

- Do not let the power cord of an appliance hang over the edge of a table or bench top or touch any hot surface.

- Do not operate any electrical appliance with a damaged cord or after the appliance has been damaged in any manner. If damage is suspected, return the appliance to the nearest Sunbeam Appointed Service Centre for examination, repair or adjustment.

- For additional protection, appliance should be supplied through a residual current device (RCD) having a rated residual operating current not exceeding 30 mA in the electrical circuit supplying power to your appliances.

- Do not immerse the appliance in water or any other liquid unless recommended.

- Appliances are not intended to be operated by means of an external timer or separate remote control system.

- This appliance is intended to be used in household and similar applications such as: staff kitchen areas in shops, offices and other working environments; farm houses; by clients in hotels, motels and other residential type environments; bed and breakfast type environments.

If you have any concerns regarding the performance and use of your appliance, please visit the Sunbeam Website or contact Sunbeam Consumer Care - details are on the back page. Ensure the above safety precautions are understood.

Welcome Features Of Your Sunbeam ActiveSense™ Blende

Congratulations on your new Sunbeam blender with ActiveSense Technology™ Your blender will allow you to create delicious smoothies, milkshakes, salsas and much more every day! Your product includes the following features and benefits:

• ActiveSense Technology™ takes the guesswork out of blending. When using the Food Mode settings, the blender senses what is in the jug and automatically adjusts its blending speed, blade direction and run time to deliver a blended meal to the consistency selected.
• The ability to know when there is not enough liquid in the Jug to properly blend. ActiveSense Technology™ will stop the blending process and notify you to add more liquid when this happens.
• A user-friendly control panel which gives you the flexibility of using Manual Controls or selecting from a variety of Food Modes. With Food Mode, take it a step further by choosing the thickness of your drink too.
• An advanced 6-Point Extra-Wide Blade System with patented Reversing Blade Technology™, which cycles forward and backward at varying speeds to deliver optimal results for your blending needs.
• A Blend-N-Go™ bottle and spill-proof drinking lid so you can conveniently take drinks on the go!

1.FillerCap

1. Jug lid

2. Break Resistant, BPA-Free Tritan™ Plastic Jug

4.SealingRing

5.6-PointBlade

⚠ WARNING: The blade is very sharp, handle carefully.

1. Threaded Jug Bottom

2. Motor Base

3. Control Panel

a. Power Button

b. Food Mode selection:

Milkshake

Juice

Smoothie

Salsa

Frozen Drink

c. Thickness selection:

For Beverages: Thick or Thin

For Foods: Chunky or Smooth

d. Manual Controls

High

Men

Low

e. Pulse Button

1. Start/Pause Button

Blend-N-Go™ Bottle Accessory Before Using Your ActiveSens

1. Cup Lid
2. Break Resistant, BPA-Free Tritan™ Plastic Cup
3. Sealing Ring
4. 6 Point Blade

⚠ WARNING: The blade is very sharp, handle carefully.

1. Threaded Jug Bottom
2. Motor Base

Step 1. Remove Packaging

Ensure all packaging has been removed carefully.

Important: : Always ensure your blender is unplugged from the power outlet before filling or removing the Blade Assembly. Always handle the Blade Assembly with caution, as the blades are extremely sharp.

Note: When removing the Blade Assembly from the Jug you may need to slightly tilt the blade assembly so that it slides out easily

Step 2. Wash and Dry Parts

Note: Before using your ActiveSense™ Blender, we recommend removing the 6-Point Blade Assembly for thorough cleaning. See page 7 for more details.

1. Remove carefully the Blade Assembly from the Tritan™ Jug by holding the Jug upright and turning the Blade Assembly clockwise.
2. Wash the parts listed below in warm soapy water:

Blade Assembly
1.7L blending Jug
- Jug Lid
750mL Blend N Go™ Bottle
Cup Ltd

1. Rinse and allow thorough air drying.

Step 3. Re-assemble the 6-Point Blade Assembly in the Tritan™ Jug

Place carefully the Blade Assembly in the Tritan™ Jug. Ensure that the Blade Assembly is firmly in place by turning it anti-clockwise from bottom of the Jug. The blender Jug will leak if the 6-Point Blade Assembly is not assembled correctly.

Step 4. Secure the Jug Lid and Filler Cap

Place the Jug Ltd firmly onto the blending Jug Ensure the Filler Cap is tightly locked to avoid movement during blending.

Using Your ActiveSense™ Blender Blade and Jug Assembly

Note: Before you use the blender for the first time, separate all parts and clean them. Refer to page 9 for Care and Cleaning instructions.

Food Mode Selection

1. Press the Power button to turn the blender on. The Start/Pause button will blink, indicating the product is active and ready to use. The light will stay on when the motor is running.

2. Press the Food Mode button, then use the up and down arrow buttons to make a selection:

Milkshake

- Juice

- Smoothie

- Salsa

- Frozen Drink

1. [Optional] Press the Thickness button to select a thickness option for the meal.

- For Beverages: Thick or Thin

- For Foods: Chunky or Smooth

1. When ready to begin, press the Start/Pause button. The blender will notify about the progress and will stop automatically when blending is complete. Press the Power button to cancel the program at any time.

2. Press the Power button to turn the blender off. The blender is pre-programmed to turn off automatically if not used for several minutes. All lights will turn off to indicate this.

Using the Manual Controls

1. Press the Power button to turn the blender on. The Start/Pause button will blink, indicating the product is active and ready to use. The light will stay on when the motor is running.

2. Press a Manual Control button, choose from Low, Med or High. When ready to start press the Start/Pause button.

3. Press the Power button to turn the blender off. The blender is pre-programmed to turn off automatically if not used for several minutes. All lights will turn off to indicate this.

Add Liquid Function

- ActiveSense Technology ^TM has the ability to sense when there is not enough liquid in the Jug to properly blend.

- If the blender senses this issue, it will stop blending and display a notification.

- Add more liquid and press the Start Pause button to resume blending.

IMPORTANT:

This blender has an interlock system which prevents the Motor or Control Panel from starting if the Blender Jug is not properly placed on the Motor Base.

If the Jug is removed during operation the blender will stop and the Power and Start/Pause buttons will flash continuously.

Caution: Blades are sharp. Handle with care.

1. Place the Blade Assembly into the Threaded Jug Bottom.

1. Place the Sealing Ring over the Blade Assembly. Carefully press and tuck the Sealing Ring into the locking groove

1. Ensure the Sealing Ring is fully and evenly locked in place and holding the Blade Assembly to the Threaded Jug Bottom.

1. Install the Blade Assembly into the Jug. Turn clockwise to tighten. Ensure the Blade Assembly is tightened to the Jug before using.

Note: The Filler Cap can be used as a tool to tighten or remove the Threaded Jug Bottom.

1. Place ingredients into the Jug. Secure the Lid and Filler Cap then slide the Jug onto the Motor Base

Using Your Blend-N-Go™ Bottle

Note: Never blend hot liquids in the Blend-N-Go™ Bottle.

1. Place the blade in the threaded Jug bottom.
2. Place the Sealing Ring over the Blade Assembly. Carefully press and tuck the Sealing Ring into the locking groove. Refer to page 7 for detailed instructions on blade assembly.
3. Place all ingredients into the Bottle, then slightly screw the Blade Assembly clockwise into the Bottle.

4. Place the Bottle onto the Motor Base, push down and turn anti-clockwise to lock. The Bottle should be sitting evenly on the 4 grooves of the Motor Base.

5. Select the Food Mode and Thickness or Manual Control (Low, Med, High) using the Control Panel buttons. Press Start/Pause Button to begin blending.

Note: The Food Mode Salsa option is not available with the Blend-N-Co™ Bottle accessory.

1. Press the Start/Pause button to stop blending and the Power button to turn the blender off. Remove the Bottle from the Motor Base by applying downward pressure and turning clockwise before lifting up.

Placing The Cup Assembly Removing The Cup Assembly

Care And Cleaning

Cleaning

Caution: Blades are sharp. Handle carefully.

• Empty the blending Jug. If necessary, use a rubber spatula to scrape foods away from the sides of the Jug.
• CAREFULLY remove the Blade Assembly from the blending Jug by turning the Blade Assembly counter-clockwise.

• All parts (except for the Motor Base) are dishwasher safe. Use the top rack of the dishwasher for the Filter Cap, Jar Lid, Sealing Ring, Blade Assembly and Threaded Jar Bottom. Place the blending Jug into the bottom basket of dishwasher.

• The blending Jug, Jug Lid, Filler Cap, Seal Selector Top, Cup Lid, Cup and Blade Assembly can also be hand washed with warm, soapy water. Rinse well and dry.
  Note: It is recommended to hand wash the Blade Assembly for longer usage.

• Check the parts as you put them back together.
• Wipe the Motor Base with a soft, damp cloth to clean. Never submerge the Motor Base in a liquid.

Tip: Run the blender with soapy water for 20-30 seconds on Manual Mode of Low or Med for cleaning without disassembly. Follow with a clean water rinse.

Storing

- Reassemble the blender for storage. Leave the Jug Lid open so no odors are retained.

Caution: Never put the blending Jug, or any other parts, in a microwave oven.

Handy Blending Tips

Blending Tips

• Do not operate for more than 10 minutes at a time.
• Repeated use of the blender in a short amount of time may result in error. Open the blending Jug and check the contents. Wait 30 seconds or unplug then plug in the unit, then blend.
• Jug should be at least 25% full at all times for optimal performance.
• Use High speeds as much as possible for whole food juices, snakes, frozen mixtures, making purées and nut butlers. High speed provides the best quality of refinement, breaking down ice, frozen fruit, whole fruits or vegetables to a smooth lump-free consistency.
• Use only the amount of food suggested in the recipes. If you want greater amounts, prepare in batches. Using larger amounts may overload and strain the motor.
• Use the PULSE button when mixture is too thick or coarse to circulate within the blender Jug.
• If on High speed the food is not circulating, try using a spatula. If this is also not working, try using a slower speed. Once the food begins to circulate again, you can switch back to a High speed.

- Due to the power of the machine, it is normal for it to be fairly loud during operation. Through the blending cycle, the noises may change, but there is no need to be concerned.

- Ice Crushing: For optimal ice crushing, fill the Jug with preferred amount of ice. Then fill with water just above where the ice stops. Use the speed dial to blend on High for a few seconds. Then drain out the excess water and you are left with a Jug filled with great consistent ice!

Add Ingredients While Blending

To add ingredients while blending, remove the Filler Cap by turning it to the Remove Cap position and lifting up. Add in ingredients as desired, then put the Filler Cap back into the Jug Lid and turn it to the lock position.

Important: DO NOT BLEND HOT LIQUIDS.

Frequently Asked Questions

Why doesn't the blender turn on?

• Make sure the Motor Base is plugged into an active power receptacle.
• Verify the blinking blue light is active after pushing the Power button.
• The Jug may not properly be placed into the motor unit. When placed correctly the Jug type will display on the screen. If not displayed, ensure the jug is secured properly to make contact with the sensor.

Why did the blender's timer reset?

- Check that the Sealing Ring is correctly assembled in between the Blade and the Jug.

Why did my blender stop blending?

• The blender is programmed to run a maximum of seven continuous minutes before stopping. If you need to blend longer than seven minutes, wait 30 seconds before blending again.
• There may not be enough liquid in the Jug to properly blend. If the Blender senses this issue it will stop blending and display a notification.

The Power and Start/Pause lights are flashing

- The jug has been removed during blending operation. Replace the jug and restart the blending program.

Recipes

BANANA AND BERRY BREAKFAST SMOOTHIE

Serves 2

2 cups milk

1 banana

34 cup frozen mixed berries

12 cup rolled oats

1 tablespoon chia seeds

1. Place all ingredients into the blender Jug.

2. Select the SMOOTHIE and THICK programs and START. Serve.

FROZEN BERRY SMOOTHIE

Serves 2

2 cups almond milk

1 cup fresh blueberries

1 cup frozen raspberries

½ cup fresh raspberries

1. Place all ingredients into the blender Jug.

2. Select the FROZEN and THICK programs and START. Serve.

STRAWBERRY MANGO SMOOTHIE

Serves 2

1¼ cups apple juice

1 cup low-fat plain yogurt

1 cup fresh strawberries

1 cup frozen mango

1 cup fresh mango

1. Place all ingredients into the blender Jug.

2. Select the SMOOTHIE and THIN programs and START. Serve.

FRUIT BASED GREEN SMOOTHIE

Serves 2

1 green apple, chopped

1 pear, chopped

1 cup baby spinach

1 kiwi fruit, halved

1¾ cups coconut water

1. Place all ingredients into the blender Jug.

2. Select HIGH speed and START. Blend for one minute. Serve.

VEGETABLE BASED GREEN SMOOTHIE

Serves 2

12 cup chopped carrot

14 avocado

½ cup frozen banana

2 stalks kale

1½ cups orange juice

1. Place all ingredients into the blender Jug.

2. Select HIGH speed and START. Blend for one minute. Serve.

VIRGIN PINA COLADA

Serves 2

1½ cups frozen pineapple chunks

14 cup ice

1 cup unsweetened pineapple juice

1 cup coconut milk

Fresh pineapple wedges and Maraschino cherry, to garnish

1. Place all ingredients into the blender Jug.

2. Select the SMOOTHIE and THICK programs and START. Serve.

Recipes

BARBADOS ICED TEA

Serves 2

2 bags of peppermint tea sleeped in 1 cup hot water and 2 teaspoons sugar, chilled

2 cups ice

4 mint leaves

12 teaspoon ginger powder

Honey for drizzling

1. Place all ingredients into the blender Jug.

2. Select the FROZEN program and START.

3. Pour into a high ball glass and garnish with a sprig of mint.

TRADITIONAL MILKSHAKE

Serves: 3-4.

Makes approximately 1 litre

500ml (2 cups) milk

4 scoops [180g] vanilla ice cream

2 teaspoons vanilla extract

1. Place all ingredients into the blender Jug.

2. Select the MILKSHAKE and THICK programs and START. Serve.

TIM TAM SMOOTHIE

Serves: 2

5 Arnott's Original Tim Tams

4 scoops (180g) vanilla ice cream

400ml milk

1 Arnoll's Original Tim Tam, extra,

crumbled to garnish

1. Place all ingredients into the blender Jug.

2. Select the SMOOTHIE and THICK programs and START. Serve.

3. Garnish with the extra Tim Tam.

Watermelon and Mint Frappe

Serves: 2

6 ice cubes

13 cup fresh mint leaves

500g watermelon pieces

Extra mint leaves, to garnish

1. Place all ingredients into the blender Jug.

2. Select the FROZEN and THIN programs and START.

3. Pour into serving glasses and garnish with extra mint to serve.

Tip: Serve immediately, as the mint will cause the Frappe to go brown on standing

COCONUT DREAM

Serves: 2

500ml (2 cups) apple juice

125ml [½ cup] light coconut milk

250g frozen strawberries

1 scoop [45g] vanilla ice cream

1. Place all ingredients into the blender Jug.

2. Select the SMOOTHIE and THIN programs and START. Serve.

3. Garnish glass with a strawberry if desired.

Recipes

MIXED BERRY FRAPPE

Serves: 2

500ml (2 cups) orange juice

300g frozen mixed berries

1 tablespoon caster sugar

1. Place all ingredients into the blender Jug.

2. Select the FROZEN and THIN programs and START. Serve.

COFFEE AND BANANA THICKSHAKE

Serves: 2

1 ripe banana, peeled, chopped

30ml espresso, cold

250ml (1 cup) milk

2 scoops (90g) vanilla ice cream

4 ice cubes

1. Place all ingredients into the blender Jug.

2. Select the SMOOTHIE and THICK programs and START. Serve.

Tip: If you don't have access to a coffee machine, use 2 teaspoons instant coffee dissolved in 1 12 tablespoons boiling water. Refrigerate until cold.

MANGO LASSI

Serves: 4

450g mango pieces

1 cup vanilla yoghurt

6 ice cubes

325ml milk

Chopped pistachios and ground cardamom, to garnish

1. Place all ingredients into the blender Jug.

2. Select the SMOOTHIE and THICK programs and START. Serve.

3. Garnish with pistachios and dust with ground cardamom.

ICED COFFEE

Serves: 3

60ml espresso, cold

500ml (2 cups) milk

2 scoops (90g) vanilla ice cream

4 ice cubes

Whipped cream and cocoa powder, to serve

1. Place all ingredients into the blender Jug.

2. Select the SMOOTHIE and THICK programs and START. Remove the lid and pour into serving glasses.

3. Top with whipped cream and dust with cocoa powder.

Tip: If you don't have access to a coffee machine, use 1 tablespoon instant coffee dissolved in 12 cup boiling water. Refrigerate until cold.

Recipes

BERRY JUICE

Serves 4

2 cups fresh strawberries

1 cup fresh raspberries

1½ tablespoons caster sugar (optional)

1. Place all ingredients into the blender Jug.

2. Select the JUICE program and THICK Press START.

3. Once the cycle has finished, add 2 cups of chilled water to the jug.

4. Select the JUICE and THIN programs. Press START. Serve.

Tip: You can use any soft fruit such as mango, kiwi, banana, avocado, peach, apricot or watermelon to make a delicious juice.

TOMATO SALSA

Makes 2 cups

12 red onion, peeled

1 large clove of garlic

1 fresh jalapeño or green chilli, seeds removed

2 ripe tomatoes, quartered

14 bunch of fresh coriander

1 tablespoon of Balsamic vinegar

2 tablespoon extra-virgin olive oil

Salt and pepper to taste

1. Place the onion, garlic, chilli, tomatoes and coriander into the blender Jug in the order listed.

2. Select the SALSA and CHUNKY programs and START.

3. Remove ingredients from blender jug to a serving bowl.

4. Dress with combined balsamic and olive oil seasoned with salt and pepper.

Sunbeam

The Sunbeam ActiveSense™ Blender 5 Year Motor Guarantee

Sunbeam has built its reputation on manufacturing quality electrical appliances. Our High Performance Blender is constructed from the highest quality materials. So much so, we guarantee our Blender motor for five (5) years against faulty materials or manufacture. This guarantee is just another expression of our confidence in the way we make appliances at Sunbeam. In order to be eligible for this guarantee, you must retain your receipt as proof of purchase.

Your High Performance Blender is covered for the first year against faulty material or manufacture by the Sunbeam 12 Month Replacement Guarantee. Should you experience any difficulties with your appliance within this 12 Month period, please phone our customer service line for advice on 1300 881 861 in Australia, or 0800 786 232 in New Zealand. The Sunbeam [5] five-year motor guarantee begins from date of purchase and extends for four years beyond the 12 Month Replacement Guarantee. It covers only the motor, guaranteeing it against faulty materials or manufacture. It does not cover damage caused by accident, misuse or being used in a manner not in accordance with the Instruction Book. Similarly, this motor guarantee does not cover freight or any other costs incurred in making a claim.

If a fault should develop with the motor after the period covered by the 12 Month Replacement Guarantee, please call Sunbeam Customer Service on the number listed below or send a written claim to Sunbeam at the address listed below. On receipt of your claim, Sunbeam will advise you on how to obtain a replacement motor if your motor is defective. Alternatively, you can return the Sunbeam High Performance Blender to any of Sunbeam's authorised service centres, together with your receipt. The service centre will examine the motor and if it is faulty or defective, the motor will be replaced free of charge.

For a complete list of Sunbeam's authorised service centres visit our website or call: Australia

1300 881 861

www.sunbeam.com.au

Suite 1, Level 1, 13 Lord Street

Botany NSW 2019 Australia

New Zealand

0800 786 232 26

www.sunbeam.co.nz

Level 6, Building 5, Central Park

660-670 Great South Road

Greenlane, Auckland

The benefits given to you by this guarantee are in addition to your other rights and remedies under any laws which relate to the appliance. Our goods come with guarantees that cannot be excluded under the Australian Consumer Law and under the New Zealand Consumer Guarantees Act. In Australia you are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.

IMPORTANT NOTE

Sunbeam agrees to replace the motor in the event of the motor developing a fault or defect, within the four years after the 12 Month Replacement Guarantee. As your High Performance Blender needs to be assessed at a Sunbeam authorised service centre, it will not be accepted through retail stores, if using the Sunbeam High Performance Blender for commercial use this motor guarantee is limited to 12 months from the date of purchase.

Warranty

This Sunbeam product is covered by a 12 month replacement or repair warranty, which is in addition to your rights under the Australian Consumer Law (if your product was purchased in Australia) or New Zealand Consumer Guarantees Act (if your product was purchased in New Zealand).

Upon receipt of your claim, Sunbeam will seek to resolve your difficulties or, if the product is defective, advise you on how to obtain a replacement or refund.

To assist us in managing warranty claims, we recommend you register your product as soon as practicable after purchase by creating a MySunbeam account on our website and uploading a copy of your original receipt.

In order to make a claim under our warranty, you must have the original proof of purchase documentation for the product and present it when requested (if not already uploaded to our website).

Should your product develop any defect within 12 months of purchase because of faulty materials or workmanship, we will replace or repair it, at our discretion, free of charge. A product presented for repair may be replaced by a refurbished product of the same type rather than being repaired. Refurbished parts may be used to repair the product.

Our replacement or repair warranty only applies where a defect arises as a result of faulty material or workmanship during the warranty period. Your warranty does not cover misuse or negligent handling (including damage caused by failing to use the product in accordance with this instruction booklet), accidental damage, or normal wear and tear.

Your warranty does not:

• cover freight or any other costs incurred in making a claim, consumable items, accessories that by their nature and limited lifespan require periodic renewal (such as filters and seals) or any consequential loss or damage; or

- cover damage caused by: - power surges, power dips, voltage supply problems, or use of the product on incorrect voltage;

- servicing or modification of the product other than by Sunbeam or an authorised Sunbeam service centre; - use of the product with other accessories, attachments, product supplies, parts or devices that do not conform to Sunbeam specifications; or - exposure of the product to abnormally corrosive conditions; or

- extend beyond 3 months if the product is used in commercial, industrial, educational or rental applications.

The benefits given to you by our warranty are in addition to other rights and remedies under law in relation to the product.

In Australia our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and for compensation for any other foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.

Our goods also come with guarantees that cannot be excluded under the New Zealand Consumer Guarantees Act.

If your warranty claim is not accepted, we will inform you and if requested to do so by you, repair the product provided you pay the usual charges for such repair. You will also be responsible for all freight and other costs.

Should your product require repair or service after the warranty period, contact your nearest Sunbeam service centre. For a complete list of Sunbeam's service centres, visit our website or call our customer care line for advice on: 1300 881 861 in Australia, or 0800 786 232 in New Zealand.

Sunbeam

Need help with your appliance?

Contact our Customer Care Team or visit our website for information and tips on getting the most from your appliance.

AUSTRALIA

Visit: www.sunbeam.com.au

Phone: [phone]

Mail: Suite 1, Level 1, 13 Lord Street, Botany NSW 2019

NEW ZEALAND

Visit: www.sunbeam.co.nz

Phone: [phone]

Mail: Level 6, Building 5, Central Park, 660–670 Great South Road, Greenlane, Auckland

Newell Australia Pty Ltd | ABN 68 075 071 233

Due to continued product improvements, product illustrations and photographs in this User Guide may differ slightly from the actual product.

Printed in China