SuperServer 5019P-WT - Server Supermicro - Free user manual and instructions
Find the device manual for free SuperServer 5019P-WT Supermicro in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Server |
| Model | SuperServer 5019P-WT |
| Form Factor | 1U Rackmount |
| Dimensions (W x H x D) | 17.2 x 1.7 x 8.7 in (437 x 43 x 221 mm) |
| Weight | 12 lbs (5.4 kg) |
| Power Supply | 200W AC-DC power supply |
| Processor Support | Intel Xeon E3-1200 v5/v6 (LGA 1151) |
| Chipset | Intel C236 |
| Memory | 4x DIMM slots, up to 64GB ECC DDR4 2133/2400 MHz |
| Storage | 2x 3.5" SATA3 hot-swap bays, 1x M.2 PCIe 3.0 x4 |
| Network | 2x Gigabit Ethernet (Intel i210) |
| IPMI | Dedicated IPMI 2.0 (Aspeed AST2400) |
| Expansion Slots | 1x PCIe 3.0 x8 (low profile) |
| Operating Temperature | 0°C to 40°C (32°F to 104°F) |
| Humidity | 8% to 90% non-condensing |
| Maintenance | Hot-swap drives, modular fans, easy access to DIMMs and CPU |
| Safety Features | Overheat alarm, intrusion detection, redundant power supply option |
| Spare Parts & Repairability | Field-replaceable units: fans, power supply, drives, memory |
| Compliance | FCC, CE, UL, RoHS |
| Warranty | 3-year limited warranty |
Frequently Asked Questions - SuperServer 5019P-WT Supermicro
How do I install an operating system on the SuperServer 5019P-WT?
Boot from a USB or optical drive (if available). Enter the BIOS setup by pressing Del during startup, set boot order to your installation media, and follow OS installer prompts.
Can I use non-ECC memory?
The C236 chipset and Xeon E3 processors support only ECC DDR4 memory. Non-ECC may not work or will cause errors.
How to access the IPMI remote management interface?
Connect to the dedicated IPMI LAN port (labeled IPMI). Default IP is 192.168.1.10, username ADMIN, password ADMIN. Change immediately for security.
What is the maximum storage capacity?
The two 3.5" bays support up to 2x 14TB HDDs each (28TB total). The M.2 slot supports NVMe SSDs up to 2TB.
How to reset the BIOS password?
Open the chassis, locate the CMOS clear jumper (JBR1) on the motherboard. Short pins 2-3 for a few seconds, then return to 1-2.
Can I add a dedicated GPU?
Yes, a low-profile PCIe 3.0 x8 card can be installed. Note that power is limited to 25W from the slot.
What is the sound level of this server?
At idle, around 30 dB. Under full load, fan speed increases to around 45 dB. It's suitable for office environments.
How do I update the BIOS?
Download the latest BIOS from Supermicro support site. Use the Flash Update utility within IPMI or create a bootable USB with the .bin file.
Is the power supply redundant?
The standard model has a single 200W power supply. A redundant power supply option (2x 200W) is available as an add-on.
What RAID options are available?
The C236 chipset supports software RAID 0,1,5,10 via Intel RST. For hardware RAID, install a compatible RAID controller in the PCIe slot.
User questions about SuperServer 5019P-WT Supermicro
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Server in PDF format for free! Find your manual SuperServer 5019P-WT - Supermicro and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SuperServer 5019P-WT by Supermicro.