SC-270 - Curling iron Scarlett - Free user manual and instructions

Product Type	Curling Iron
Brand	Scarlett
Model	SC-270
Barrel Diameter	25 mm (1 inch)
Barrel Material	Ceramic coated
Temperature Range	140°C – 200°C
Heat Settings	Adjustable thermostat
Power Supply	AC 220-240V, 50/60Hz
Power Consumption	45 W
Cord Length	1.8 m
Swivel Cord	Yes
Heating Time	Approx. 60 seconds
Auto Shut-Off	Yes, after 60 minutes
Safety Features	Cool tip, overheat protection
Weight	350 g (0.77 lbs)
Dimensions (L x W x H)	32 x 4 x 4 cm
Included Accessories	Heat resistant mat
Color	Black / White
Care & Cleaning	Unplug and wipe with damp cloth
Spare Parts Availability	Contact authorized service center
Repairability	Professional repair only

Frequently Asked Questions - SC-270 Scarlett

What is the barrel diameter of the Scarlett SC-270 curling iron?

The barrel diameter is 25 mm (1 inch), suitable for creating classic curls and waves.

How do I adjust the temperature on the SC-270?

Turn the dial on the handle to select the desired temperature between 140°C and 200°C. Lower for fine hair, higher for thick or coarse hair.

Does the SC-270 have an auto shut-off feature?

Yes, it automatically shuts off after 60 minutes of inactivity for safety.

How long does it take to heat up?

The curling iron reaches the selected temperature in approximately 60 seconds.

Can I use this curling iron on wet hair?

No, always use on dry hair to avoid damage. For best results, apply heat protectant spray before styling.

What is the cord length?

The power cord is 1.8 meters long and swivels for easy handling.

How do I clean the curling iron?

Unplug the device and let it cool completely. Wipe the barrel with a damp cloth and dry thoroughly.

What safety precautions should I take?

Always place the iron on a heat-resistant surface when hot. Keep away from water and flammable materials. Do not touch the heated barrel.

What should I do if the iron stops working?

Check the power connection and ensure the thermostat is set. If it still doesn't work, contact Scarlett authorized service for repair.

Is the barrel coated with ceramic?

Yes, the barrel has a ceramic coating that ensures even heat distribution and reduces hair damage.

USER MANUAL SC-270 Scarlett

Illustration of a SCARLETT hairdryer with black bristles and a handle (no text or symbols on the device itself)

www.scarlett.ru

GB DESCRIPTION

1. Housing
2. Air inlet
3. Cord swivel protection
4. Hanging loop
5. Operating modes switch
6. Attachment release knob
7. Brush barrel

CZ POPIS BG ОПИСАНИЕ

GB INSTRUCTION MANUAL IMPORTANT SAFEGUARDS

- Please read this instruction manual carefully before use.

- Before connecting the appliance for the first time check that voltage indicated on the rating label corresponds to the mains voltage in your home.

- For home use only. Do not use for industrial purposes. Do not use the appliance for any other purposes than described in this instruction manual.

- Do not use outdoors.

- Always unplug the appliance from the power supply before cleaning and when not in use.

- Do not immerse the unit, cord or plug in water or other liquids. If it has happened, remove the plug from the wall socket immediately and have the unit checked by an expert before using it again.

- If the appliance is used in a bathroom, it should always be unplugged after use, because nearness of water is dangerous even if the appliance is switched off.

- For additional protection, the installation of a residual current device (RCD) having a rated residual operating current not exceeding 30 mA is advisable in the electrical circuit supplying the bathroom. Ask your installer for advice.

- Do not spray aerosol products when the hair dryer is in operation.

- This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliances by a person responsible for their safety.

- Children should be supervised to ensure that they do not play with the appliance.

- Do not leave the appliance switched on when you do not use it.

- Do not use other attachments than those supplied.

- Never carry or suspend the appliance by the cord.

- If the power cord is damaged it should be replaced by the manufacturer or authorized servicing center or qualified professional for safety reasons.

- Do not attempt to repair, adjust or replace parts in the appliance. Repair the malfunctioning appliance in the nearest service center.

- Keep the cord away from sharp edges and hot surfaces.

- If the product has been exposed to temperatures below 0^ C for some time it should be kept at room temperature for at least 2 hours before turning it on.

IMPORTANT:

- Keep your hair away from the immediate vicinity of the air inlet opening. Keep the air inlet filter dust and fluff free.

- Do not cover air inlet or air outlet otherwise the hair dryer may overheat.

- The attachments become hot during operation.

- The manufacturer reserves the right to introduce minor changes into the product design without prior notice, unless such changes influence significantly the product safety, performance, and functions.

ATTENTION! Do not use the device beside the bathrooms, swimming pools and other vessels containing water.

INSTRUCTION FOR USE

- Fully unwind the cord.

- Attach a nozzle.

- Insert the plug into the power supply.

- Use the operating modes switch to set the desired mode.

SPEED CONTROL

- Your comb hair dryer is equipped with 3 operating modes:

- 0 - off;

- 1 – Warm air flow of medium intensity for gentle drying or styling;

- 2 - Hot, strong air flow for a quick dry;

- C - Cool air. This function is used to fix the hair style.

BRUSH BARREL (VOLUME FORMING)

• Used to make curls and give volume to hair.

- Comb a hair lock and brush it several times from roots to ends.

- Fold a hair lock round the brush, proceeding from the hair ends towards the roots.

- Wait for some seconds without moving the brush so that the lock gets properly warmed and takes the desired shape and so that the hair gets lifted at the roots.

- Finish your hairstyle with some cool air to fix the shape.

- Divide your hair into locks and wind up on the brush barrel. Do not comb hair just after curling; let it cool down.

- To prevent overheating do not work continuously longer than 10 minutes and obligatory stop the hair dryer for no less than 10 min.

- Always switch the appliance off and unplug when finished. Leave it to cool for a few minutes before putting away.

EASY ATTACHMENT REMOVAL BUTTON

- To remove an attachment fast and easily, press the attachment removal button (6).

CARE AND CLEANING

- Switch off the appliance, unplug it from the power supply and allow to cool fully.

- Do not use abrasive cleaners.

STORAGE

- Ensure that the hair dryer is completely cool and dry.

- Do not wrap the cord around the appliance, as this may cause damage.

- Keep the appliance in a cool, dry place.