WRT-5260 - Fridge Wellington - Free user manual and instructions
Find the device manual for free WRT-5260 Wellington in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Refrigerator |
| Brand | Wellington |
| Model | WRT-5260 |
| Height | 170 cm |
| Width | 60 cm |
| Depth | 65 cm |
| Weight | 55 kg |
| Energy Consumption | 200 kWh/year |
| Capacity (Refrigerator) | 250 L |
| Capacity (Freezer) | 80 L |
| Climate Class | N/ST |
| Noise Level | 40 dB |
| Temperature Control | Mechanical dial |
| Defrost Type | Auto defrost (refrigerator), manual (freezer) |
| Shelves Material | Tempered glass |
| Door Reversible | Yes |
| Door Storage | Yes, 4 door bins |
| Interior Light | LED |
| Handle Type | Recessed |
| Color | White |
| Warranty | 2 years |
Frequently Asked Questions - WRT-5260 Wellington
What is the ideal temperature setting for my Wellington WRT-5260 fridge?
The ideal temperature for the refrigerator compartment is between 1°C and 4°C (34°F to 40°F). For the freezer, it should be set to -18°C (0°F) or lower. Use the mechanical dial inside the fridge to adjust settings.
How do I install the WRT-5260 fridge?
Place the fridge on a flat, sturdy surface. Allow at least 5 cm (2 inches) of clearance on all sides for ventilation. Let the fridge stand upright for 2 hours before plugging it in if it was transported horizontally.
Why is my fridge not cooling properly?
Check if the temperature dial is set correctly. Ensure the door seals are clean and tight. Verify that the condenser coils (usually at the back) are free of dust. Also avoid overloading the fridge or blocking air vents.
How often should I defrost the freezer?
The freezer compartment requires manual defrosting when ice build-up reaches 5-10 mm (0.2-0.4 inches). Use the defrost drain at the bottom to collect water. Never use sharp tools to remove ice.
Can I change the door swing direction?
Yes, the door on the WRT-5260 is reversible. You can change the hinges from right to left or vice versa by following the instructions in the user manual. Make sure to have a screwdriver and assist from another person.
What is the noise level during operation?
The normal operating noise is around 40 dB, which is similar to a quiet library. You may hear occasional sounds from the compressor, refrigerant flow, or fan. If unusual loud noises occur, check for leveling issues or contact service.
How do I clean the interior and exterior?
Unplug the fridge. For interior, use a mild detergent mixed with warm water and a soft cloth. Avoid abrasive cleaners. For exterior, wipe with a damp cloth. Clean the condenser coils (if accessible) every 6 months with a vacuum cleaner brush.
What should I do if the interior light does not work?
First, check that the fridge is plugged in and the door switch is not stuck. The light is an LED that is not replaceable by the user. If it fails, contact Wellington customer service for assistance.
How much energy does the WRT-5260 consume?
The estimated annual energy consumption is 200 kWh, based on standard usage. Actual consumption depends on ambient temperature, door openings, and settings. This fridge is rated Energy Class A (if applicable).
Where can I find spare parts or repair service for my Wellington fridge?
Spare parts such as shelves, door bins, and temperature controls are available through authorized Wellington service centers. Check the warranty card or the brand's official website for contact details. Use only genuine parts.
User questions about WRT-5260 Wellington
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Fridge in PDF format for free! Find your manual WRT-5260 - Wellington and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. WRT-5260 by Wellington.