SuperServer SYS-121C-TN10R - Server Supermicro - Free user manual and instructions
Find the device manual for free SuperServer SYS-121C-TN10R Supermicro in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Server |
| Brand | Supermicro |
| Model | SuperServer SYS-121C-TN10R |
| Form Factor | 1U Rackmount |
| Dimensions (H x W x D) | 1.7 x 17.2 x 20.4 inches (43 x 437 x 518 mm) |
| Weight | Approximately 25 lbs (11.3 kg) |
| Power Supply | 1000W Redundant Platinum Level |
| Main Functions | Supports Intel Xeon Scalable processors, up to 1TB DDR4 ECC memory, 10x hot-swap drive bays, dual 10GbE LAN, IPMI 2.0 |
| Maintenance & Cleaning | Regular dust removal, check fans and power supplies, ensure proper airflow |
| Safety Precautions | Follow ESD precautions, use grounded outlets, avoid liquid exposure |
| Spare Parts & Repairability | Hot-swappable drives, redundant PSUs, replaceable fans, memory and CPU upgrades |
| General Information | Operating temperature 10°C to 35°C, storage -40°C to 70°C |
Frequently Asked Questions - SuperServer SYS-121C-TN10R Supermicro
How do I install hard drives in the SuperServer SYS-121C-TN10R?
Open the front bezel, insert drives into the hot-swap drive trays, and secure them. The server supports up to 10 2.5-inch SATA/SAS drives. No tools required for tray removal.
How do I access the BIOS setup?
During boot, press the Delete key or F2 to enter the BIOS setup utility. From there you can configure system settings, boot order, and hardware parameters.
How can I reset the IPMI password?
You can reset the IPMI password via the web interface if you have admin access, or by clearing CMOS. Alternatively, use the ipmitool command:
ipmitool user set password 2 newpassword.What CPUs are compatible with this server?
The server supports Intel Xeon Scalable processors (1st and 2nd Gen) in the LGA 3647 socket. Check the Supermicro website for the latest CPU support list.
What type of memory does the SYS-121C-TN10R use?
It uses DDR4 ECC RDIMM/LRDIMM memory. The system supports up to 1TB across 16 DIMM slots. Speeds up to 2933 MHz are supported.
How do I replace a failed power supply?
The power supplies are hot-swappable. Simply press the release latch, pull the faulty PSU out, and insert a new one of the same type. Ensure the power cord is disconnected before removal.
The server does not power on. What should I check?
Check the power cable connections, ensure the PSU switch is on, and verify that the power source is working. If using redundant PSUs, try swapping them. Also check the front panel LED for error codes.
How can I update the firmware?
Download the latest firmware from the Supermicro support site. Use the Sum tool or the IPMI web interface. For BIOS updates, copy the file to a USB drive and use the EFI shell flash utility.
What is the default IPMI IP address?
The default IPMI IP is 192.168.1.100 with subnet mask 255.255.255.0. The default username is admin and password is admin. Change these immediately for security.
How do I install an operating system?
Insert your installation media (USB or DVD), boot from it by selecting the device in the boot menu (F11), and follow the OS installer. For RAID configuration, enter the RAID BIOS using Ctrl+H during boot.
User questions about SuperServer SYS-121C-TN10R Supermicro
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Server in PDF format for free! Find your manual SuperServer SYS-121C-TN10R - Supermicro and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SuperServer SYS-121C-TN10R by Supermicro.