FD8355EHV - Security Camera Vivotek - Free user manual and instructions
Find the device manual for free FD8355EHV Vivotek in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Fixed Dome Network Camera |
| Model | FD8355EHV |
| Image Sensor | 1/2.8" Progressive Scan CMOS |
| Resolution | 1920 x 1080 (2 MP) |
| Lens | Fixed focal, f=2.8 mm, F1.6 |
| Minimum Illumination | 0.05 lux (color), 0 lux with IR |
| IR Distance | Up to 30 m (smart IR) |
| Video Compression | H.265, H.264, MJPEG |
| Wide Dynamic Range | 120 dB true WDR |
| Network | 10/100 Base-T Ethernet, PoE (802.3af) |
| Dimensions (Ø x H) | Ø142 mm x 106 mm |
| Weight | 600 g |
| Power Supply | PoE (IEEE 802.3af) or DC 12V |
| Operating Temperature | -30°C to 60°C |
| Weatherproof Rating | IP66, IK10 |
| Main Features | Smart IR, motion detection, tampering alarm, day/night |
| Cleaning and Maintenance | Clean the dome with a soft dry cloth; avoid solvents |
| Security | HTTPS, IP address filtering, password protection, 802.1X |
| Spare Parts and Repairability | Contact authorized dealer for spare parts; not user repairable |
| General Information | Suitable for indoor and outdoor surveillance |
Frequently Asked Questions - FD8355EHV Vivotek
How do I reset the Vivotek FD8355EHV to factory defaults?
Press and hold the reset button (located on the camera's base) for 10 seconds until the status LED flashes red. The camera will reboot with factory settings.
What is the default IP address of the FD8355EHV?
The default IP is 192.168.0.100. You can also use the Vivotek IP Finder utility to locate the camera on your network.
Does the FD8355EHV support Power over Ethernet (PoE)?
Yes, it supports IEEE 802.3af PoE, allowing both power and data over a single Ethernet cable. Alternatively, you can use a DC 12V power supply.
How do I mount the camera?
Use the included mounting bracket. Drill holes for the screws and pass the cables through the bracket. Secure the camera and adjust the dome for the desired viewing angle.
What is the field of view?
With the standard 2.8mm lens, the horizontal field of view is approximately 103°, vertical 57°, and diagonal 120°.
How do I enable smart IR to avoid overexposure?
In the camera's web interface, go to Camera Settings > IR LED and enable 'Smart IR' mode. The camera will automatically adjust IR intensity based on subject distance.
Can I use the FD8355EHV with an NVR?
Yes, it is ONVIF compliant (Profile G, S, T) and works with most third-party NVRs. You can also use Vivotek's own NVR solutions.
How do I clean the dome?
Use a soft, lint-free microfiber cloth slightly dampened with water. Wipe gently in a circular motion. Avoid using alcohol, ammonia, or abrasive cleaners.
What is the maximum SD card size supported?
It supports microSD/SDHC/SDXC cards up to 256 GB (Class 10 or higher recommended). Insert the card into the slot under the dome cover.
How do I access the camera remotely?
Set up port forwarding on your router for HTTP (port 80) and RTSP (port 554). Alternatively, use Vivotek VAST software or the myVivotek cloud service for easy remote access.
User questions about FD8355EHV Vivotek
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Security Camera in PDF format for free! Find your manual FD8355EHV - Vivotek and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. FD8355EHV by Vivotek.